• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.376-381
• /
• 1996

In this study, the quality contral of high strength reacy-mixed concrete with design compressive strength of 420 kgf/$\textrm{cm}^2$ placed at a tail building for a long period is statistically investigated. The amount of cast-in-place high strength concrete is by about $15000\textrm{m}^3$. The required average compressive striength is 500 kgf/$\textrm{cm}^2$ according to KS F 4009 with assumed coefficient of variation of 11%. Since there are many concrete members in this construction, fly ash is used to reduce the heat of hydration of concrete. As the results of this study, the average actual 28-day compressive strength is 498 kgf/$\textrm{cm}^2$ and the coefficient of variation is 6.7%. The placing speed is comparable to normal strength concrete, however, the pump pressure is higher than that of normal strength concrete.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 말뚝기초 학술발표회
• /
• pp.65-84
• /
• 2000

Europe and US which have more restrictive regulations than Korea about the noise and vibration during construction are using Auger-cast Pile to reduce the problem relating with noise and vibration. However Auger-cast Pile has problems like difficult quality control and low bearing capacity. In Europe, Displacement in-situ concrete Pile has been used to sove that problems since 1990s, and Korea has performed the test construction in 1997 and it has been used as the real structural foundation since 1998. Test and real construction results verified that the allowable capacity of the pile(diameter = 410mm) is between 70 and 100ton. Though De Beer & Van Imps design method utilizing CPT result is used to calculate the bearing capacity of the Displacement in-situ Pile, Korea is dependant upon the SPT as the sounding test, so design method utilizing SPT result is necessary to promote the application of the pile. To find out reasonable design method using SPT result, rearing capacity of the pile constructed in sand and clay in Korea was calculated using Meyerhof, SPT-CPT translation method, Nordlund, Douglas and DM-7 method, and the calculation results were compared to the load test result. Analysis result shows that SPT-CPT translation method is more reliable than others and economical design can be possible because it considers efficiently the friction capacity of Displacement in-situ Pile.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.544-550
• /
• 1997

In this study, the advanced on-sided stress wave velocity measurement method was applied to investigate the effects of composition, age and moisture content in concrete. Two concrete specimens that have different composition were used to figure out the change of the Longitudinal and Surface wave velocity due to different composition. The other concrete specimen was cast and the Longitudinal and Surface wave velocity was monitored during curing process. After 28-day old, the effect of moisture content in the concrete specimen to the stress wave velocity is presented in this paper during the time period 43-74 days after casting. For drying process. an aggregate drying oven was used. A conventional ultrasonic through transmission method was used to compare with the results determined by the one-sided method.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.255-266
• /
• 2014

이 논문은 새로운 수직 접합부와 현장타설 습식 접합부를 가진 T형 프리캐스트 벽체의 내진 성능에 관한 연구이다. 반복하중을 받는 T형 PC 벽체의 하중-변위 관계, 강도, 연성도, 파괴 모드, 그리고 변형 능력에 대해 알아보았다. 실험체 주요 변수는 전단력 전달을 위한 대각 철근의 유무이다. 벽체의 양단에 위치한 길이방향 주철근이 먼저 항복을 하였고 최종 변형은 C형 접합부의 파괴에 의해 결정되었다. 그리고 전단력 전달을 위한 대각 철근은 균열 제어에 효과적인 것으로 나타났다. 단면 해석을 통해 구한 강도와 변형은 실험값과 대체로 일치하였다.

• 한국강구조학회 논문집
• /
• 제27권3호
• /
• pp.347-357
• /
• 2015

본 연구에서는 지진모의실험으로 비보강 선설치앵커의 전단에 대한 콘크리트 파열파괴강도를 평가하기 위한 실험 연구를 수행하였다. 이를 위해 앵커 직경 30mm, 연단거리 150mm, 매입깊이 240mm인 비균열 시험체와 전단하중에 수직 및 수평 방향 균열콘크리트 시험체들에 대해 각각 실험을 수행하였다. 지진모의실험 시 동적 가력은 CSA N287.2, ACI 355.2와 ETAG 001 기준을 참조하여 결정하였으며 이후 파괴 시까지 정적 재하를 실시하였다. 비균열 및 균열콘크리트 모두 지진모의실험에 의한 저항강도는 각각 정적 강도와 거의 동등한 수준이었다. 한편, 콘크리트 파괴단면의 깊이는 $8d_0$에 모두 미치지 못하였으며 이로부터 기존 강도식에 비해 유효지압길이를 고려하지 않는 ACI 318-11의 수정강도식이 콘크리트 파열파괴강도를 적절하게 평가하는 것으로 분석되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.211-215
• /
• 1996

This paper presents comparisons of pullout load of concrete with compressive strength of cylinders and cores, pulse velocity, and rebound number. A pullout test, which is a relatively new nondestructive technique, measures with a special tension ram the force required to pullout a specially shaped steel rod whose enlarged end has been cast into a concrete block. In this study 3 concrete mixes(normal strength, high-strength & super-high-strength) were made. From each mix, one 100$\times$70$\times$20 concrete block, 24 cylinders$(\phi10mm)$were casted. Each tests were performed on the concrete blocks at 3, 7, 28, and 91days. The test data shows that the pullout test is superior to the rebond hammer and the pulse velocity measurements on the evaluation of concrete strength. The pullout test is satisfactory for estimating the strength of in situ concrete at both early and late age, and its results can be reproduced with an acceptable degree of accuracy.

• Computers and Concrete
• /
• 제23권3호
• /
• pp.155-160
• /
• 2019

The use of recycled aggregate concrete for the purpose of environmental and resource conservation has gained increasing interest in construction engineering. Nevertheless, few studies have reported on the bonding performance of the bars in recycled aggregate concrete after exposed to high temperatures. In this paper, 72 pull-out specimens and 36 cubic specimens with different recycled coarse aggregate content (i.e., 0%, 50%,100%) were cast to evaluate the bond behavior between recycled aggregate concrete and steel bar after various temperatures ($20^{\circ}C$, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$). The results show that the recycled aggregate concrete pull-out specimens exhibited similar bond stress-slip curves at both ambient and high temperature. The bond strength declined gradually with the increase of the temperature. On the basis of a regression analysis of the experimental data, a revised bond strength mode and peak slip ratios relationship model were proposed to predict the post-heating bond-slip behavior between recycled aggregate concrete and steel bar.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 가을 학술발표회 논문집
• /
• pp.183-190
• /
• 1998

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.163-168
• /
• 2003

By introducing corrosion monitoring techniques, steel corrosion in concrete may be evaluated at early stage. The monitoring probes in concrete detect the causes (chlorides and $CO_2$) of steel corrosion by being cast into the concrete or diffusing in from the outside. Various systems for corrosion monitoring in concrete are reviewed in this paper. These techniques are classified according to monitoring purposes such as corrosion potential or corrosion rate of steel and causes for corrosion etc.. Today, special interests are converged in development of corrosion sensor as a monitoring method of new concept.

• 한국강구조학회 논문집
• /
• 제27권3호
• /
• pp.333-345
• /
• 2015

본 연구에서는 비균열 및 균열콘크리트에 설치된 헤어핀 보강 선설치앵커의 정적 및 동적 저항강도 평가를 위한 연구를 수행하였다. 이를 위해 앵커 직경 30mm, 연단거리 150mm, 매입깊이 240mm에 D10 헤어핀 철근으로 보강한 시험체를 제작하였으며, 균열시험체는 전단하중에 직각방향과 평행방향 균열을 각각 고려하였다. 동적 강도 평가는 지진모의실험에 의하였으며 가력방법은 ACI 355.2의 기준을 적용하였다. 헤어핀 보강 앵커의 저항강도는 콘크리트 균열과는 상관성이 없었으며 동적 강도는 정적 강도와 동등한 수준을 보였다. 마지막으로 헤어핀 보강 앵커의 설계 강도에 대한 고찰을 제시하였다.