• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1171-1182
• /
• 2009

The purpose of this case study is stability security in Talus and Coal Shale. The failure possibility of Talus area is high because of ground loss. The Coal Shale area is very week and large scale sliding possibility is high.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1038-1049
• /
• 2008

The purpose of this case study is corrosive fall in Upper-Slope. Upper-slope of this slope affect in fall of the cut-slope because of wide valley. Deposit which is piled up naturally is the sinkage occurs gradually in upper-slope.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.528-533
• /
• 2005

The last decades railroad transport has lost market share to cars, trucks and airplanes. Rail companies could not compete in flexibility, speed, cost and quality. The new technology developments of rail transport are focused on high speed. But not all technology is easily transferable from one society to another, if for no other reasons than those attributable to differences in economic, demographic, and geographic factors. This case study is focused on the technological transfer process and items of Korea's high speed rail system and also compares with the Japanese Shinkansen and German ICE.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2001.11a
• /
• pp.17-17
• /
• 2001

• Journal of radiological science and technology
• /
• v.26 no.4
• /
• pp.11-19
• /
• 2003

chest Indirect radiography were taken at 44 medical facilities in Seoul area. The results were as follows: 1. The average tube voltage was 98.2 kVp in case of 100 mm film and 91.3 kVp in case of 70 mm film. 2. The average tube current was 18.1 mAs in case of 100 mm film and 42.5 mAs in case of 70 mm film. 3. In the physical evaluation of chest Indirect radiographs, the density in case of 100 mm film was similar to that in case of 70 mm film. 4. In the visual evaluation of chest Indirect radiographs, the score of identification in case of 100 mm film was higher than that in case of 70 mm film. 5. The average dose of radiation into the skin was 1.38 mGy in case of 100mm film and 4.59 mGy in case of 70 mm film. In conclusion, the image quality of chests was excellent and the dose of radiation into the skin decreased in case of 100 mm film.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.210-219
• /
• 2022

Psychiatric nursing is a specialty where nursing students experience many difficulties in applying what they have learned in theory to clinical practice. Therefore, a situation-oriented case-based strategy is required to help them overcome the limitations of psychiatric nursing clinical practice and reduce their burden. This study aimed to measure the effectiveness of a psychiatric nursing clinical practice program using situation-oriented case-based learning. Participants comprised 63 nursing students in psychiatric nursing classes. The students were asked to create a scenario of interaction between a nurse and patient based on a case study. Empathy, therapeutic communication ability, and attitudes toward mental illnesses were measured. We analyzed the effectiveness of the program by comparing changes in the nursing students' empathy, therapeutic communication ability, and attitude toward mental illness after the program. The participants showed significant increases in empathy and therapeutic communication abilities. However, there were no significant changes in attitudes toward mental illnesses. Based on the results of this study, it is expected that situation-based learning will be effective for students who have difficulties in certain aspects, such as COVID-19, or where there are limited clinical practice opportunities, such as psychiatric nursing.

• Asian Journal of Innovation and Policy
• /
• v.3 no.1
• /
• pp.25-49
• /
• 2014

We wanted to show the different group dynamics of factors for success and failure cases for technology commercialization in small technology-based firms. Existing studies are based on product level, project level, division level or firm level. We deal with technology level, and at small-technology-based firms. This is a longitudinal case study based on 8 cases from Korea. Our study on technology level is a first trial in success and failure studies unlike all existing studies. As a first step, we introduced new categories and factors such as technology attributes and CEO reflecting data, and especially a new concept of launch readiness level. Finally, we adopted correspondence analysis to show the group dynamics. The results are as follows; Technology factors are the most important factors. Second, resource-based factors are more critical in failure cases than success cases and technology factors are more critical to success.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.6-16
• /
• 2017

This study presents a coolant void reactivity analysis of Canada Deuterium Uranium (CANDU)-6 and Advanced Canada Deuterium Uranium Reactor-700 (ACR-700) fuel lattices using a Monte Carlo code. The reactivity changes when the coolant was voided were assessed in terms of the contributions of four factors and spectrum shifts. In the case of single bundle coolant voiding, the contribution of each of the four factors in the ACR-700 lattice is large in magnitude with opposite signs, and their summation becomes a negative reactivity effect in contrast to that of the CANDU-6 lattice. Unlike the coolant voiding in a single fuel bundle, the $2{\times}2$ checkerboard coolant voiding in the ACR-700 lattice shows a positive reactivity effect. The neutron current between the no-void and voided bundles, and the four factors of each bundle were analyzed to figure out the mechanism of the positive coolant void reactivity of the checkerboard voiding case. Through a sensitivity study of fuel enrichment, type of burnable absorber, and moderator to fuel volume ratio, a design strategy for the CANDU reactor was suggested in order to achieve a negative coolant void reactivity even for the checkerboard voiding case.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.629-635
• /
• 2019

In this study, we analyzed the effect of FAN and oil cooler application on APU. MIL-STD-810 was applied to the atmospheric environment and radiation dose in order to perform thermal flow analysis. The heat flow was analyzed for the case in which the inlet / outlet fan was applied (Case 1), the case in which the inlet fan and the oil cooler were applied (Case 2), and the case in which the inlet / outlet fan and the oil cooler were applied (Case 3). As a result, it was confirmed that the cylinder head temperature of Case 3 was 21.4 times lower than that of Case 1 and 8.0 times lower than that of Case 2. Experiments were conducted under the same ambient conditions in order to examine the validity of the results. The numerical values and experimental results showed a difference of less than 7%. Through this, we were able to confirm that the APU heat flow optimization model satisfies the design conditions. The results of this study are expected to be used as basic data for optimizing heat flow of APU.

• Journal of KIBIM
• /
• v.13 no.2
• /
• pp.16-28
• /
• 2023

The concept of the Metaverse has been around not only for play but also for daily use. The interest in Metaverse is increasing, and various industries such as medicine, media, and financial started to use the new technology for diverse purposes. In addition, interest in the Metaverse is increasing in the architectural industry, but not much research has been done yet. Recently, some studies started to study focusing on the architectural design of Metaverse and the technological characteristics of Metaverse. However, there are limited studies about the utilization of the Metaverse in the architectural design process or construction process. From this perspective, the study aims to analyze the applicability of the Metaverse in the architectural design process through Metaverse case studies. In order to accomplish the research goal, the study classified user experience and technology of Metaverse in the literature review and Metaverse use in other industries such as commercial, medical, media entertainment, and construction industry. Then, this study analyzes six representative Metaverse platforms according to the application of Metaverse in the architectural design process. Finally, this study discussed the future direction and potential of Metaverse application in the Architectural design process.