• 제목/요약/키워드: carrier model

검색결과 747건 처리시간 0.029초

VECM에 의한 BDI 예측과 영향요인에 관한 실증연구 (Study on the Forecasting and Effecting Factor of BDI by VECM)

  • 이성윤;안기명
    • 한국항해항만학회지
    • /
    • 제42권6호
    • /
    • pp.546-554
    • /
    • 2018
  • 부정기시장은 정기선시장과는 달리 특정 선주나 화주가 운임에 영향을 미칠 수 없는 완전경쟁시장으로서 화물수요와 선복량에 의해 운임이 결정되지만, 금리, 환율, 경제성장율과 같은 거시경제 변수와 금융위기와 같은 경제적 충격에도 영향을 받기 때문에 용선의사결정 시 이를 고려하여야 한다. 본 논문은 금융위기 전후기간 동안(2005년부터 2017년) BDI지수에 영향을 미치는 요인이 무엇인지를 분석하고 예측하였다. ARIMA 개입모형 분석결과에 의하면, 금융위기충격은 BDI 지수에 매우 강한 영향관계가 있는 것으로 검정되었다. VEC모형 분석 결과에 의하면, 첫째로, 리보금리는 BDI 지수에 음(-)의 영향을 미치고 환율은 양(+)의 영향을 미치는 것으로 나타나고 있다. 셋째로, Johansen 검정결과에 의하면, 중국경제성장율이 BDI 지수에 정(+)의 영향을 미치고 있는데 이는 선행연구와 마찬가지로 중국은 세계의 공장이면서 소비시장으로 원자재 및 석유수요가 매우 높아 BDI 지수에 정(+)의 영향관계가 있는 것으로 입증되었다. 넷째로, 벌크발주 선복량은 BDI 지수에 부(-)의 영향을 미치는 것으로 실증되었다. 따라서, 해운선사는 단순한 운송기업에서 벗어나서 거시경제변수변화에 적절히 대처하고 경기변화에 따라 발주선복량을 적절히 조절할 수 있는 트레이딩(Trading) 경영전략을 보다 적극적으로 구사하여야만 한진해운파산 같은 안타까운 사태를 방지할 수 있을 것으로 판단된다.

수중음향통신을 위한 광대역 FIR 빔형성기 (A Broadband FIR Beamformer for Underwater Acoustic Communications)

  • 최영철;임용곤
    • 한국정보통신학회논문지
    • /
    • 제10권12호
    • /
    • pp.2151-2156
    • /
    • 2006
  • 수중음향통신을 위한 빔형성 기법은 대역폭이 반송주파수에 비해서 큰 광대역 신호 특성을 고려해야한다. 수중 음향통신에서는 협대역 신호가정이 성립하지 않는다. 본 논문에서는 기저 대역 배열신호 모델을 이용한 수중음향통신 광대역 FIR 빔형성기에 대해서 논한다. 반송주파수 25Hz, 심볼 속도 5kHz인 QPSK 방식의 수중음향통신에 있어서 광대역 FIR 빔형성기를 고려했다. 배열 센서는 8개의 등방형 센서로 구성된 선형등간격 구조이고, 센서간 간격은 반송주파수 파장의 절반이다 컴퓨터 모의실험을 통하여 각 센서에 길이가 2인 FIR 필터를 채택하고 탭간 간격이 심볼 주기의 1/4일 때 광대역 FIR 빔형성기는 최적 신호 대 간섭잡음비에 근접하였으며, 기존의 통상적인 협대역 빔형성기보다 신호 대 간섭 잡음비가 0.5dB 향상된 결과를 보였다. 광대역 FIR 빔형성기의 성능은 FIR 필터 길이가 특정 값 이상으로 커지면 더 나빠지고, 탭간 간격이 심볼 주기의 절반보다 작으면 탭간 간격은 성능에 영향을 주지 않았다. 탭간 간격 이 심볼 주기와 같은 경우에, 훈련 신호열이 통상적인 경우보다 더 많이 필요하였다.

무선 메쉬 네트워크에서의 다중 트래픽 흐름을 위한 종단간 처리량 모델링 및 효율적인 라우팅 경로 선택 기법 (Modeling End-to-End Throughput of Multiple Flows and Efficient Route Selection in Wireless Mesh Networks)

  • 왕효비;권태경;최양희
    • 한국정보과학회논문지:정보통신
    • /
    • 제37권4호
    • /
    • pp.272-283
    • /
    • 2010
  • 무선 메쉬 네트워크는 최근 주목받는 연구 주제로 부상하고 있다. 무선 메쉬 네트워크는 대규모 무선 랜 장치와 AP들이 서로 연결된 무선 기반 구조로, 무선 메쉬 네트워크의 처리량(throughput)을 향상시키는 것을 목표로 한 수많은 연구가 이루어진 바 있다. 여기에서는 동시에 생겨나는 다수의 트래픽 흐름들을 전송하기 위한 적절한 라우팅 경로를 설정하는 작업이 매우 중요하다. 본 논문에서는 IEEE 802.11 DCF하에서 전송되는 다수의 트래픽 흐름에 대해 신호 감지(Carrier Sensing), 간섭 등의 정보를 이용하여 양 말단간 (end-to-end) 처리량을 수학적으로 모델화하기 위한 방법을 제시하고자 한다. 각 단말에 성공적으로 이루어지는 평균 서비스 시간을 비교하고, 한편으로는 트래픽 흐름 가운데 병목현상이 발생하는 부분을 찾아내어 그로부터 말단간 처리량의 최대치를 계산할 수 있다. 본 논문에서 제시된 모델을 사용하여 동시에 전송되는 다수의 트래픽 흐름을 전달하기 위한 전송 경로에 대한 후보 경로를 얻어낼 수 있으며, 얻어진 경로로부터 처리량을 최대로 높일 수 있는 효율적인 경로를 찾아낼 수 있다. 제시된 모델링 기법과 최적 경로 선택 메커니즘은 무선 메쉬 네트워크에서의 다양한 트래픽 흐름을 사용한 시뮬레이션을 통해 평가하였다.

모델링된 수중음향 채널환경에서 SC-FDE와 OFDM 전송방식의 심볼오율 비교 (A Comparison of Symbol Error Performance for SC-FDE and OFDM Transmission Systems in Modeled Underwater Acoustic Communication Channel)

  • 황호선;박규태;주재훈;신기철
    • 융합신호처리학회논문지
    • /
    • 제19권3호
    • /
    • pp.139-146
    • /
    • 2018
  • 수중음향통신은 자원 및 지질탐사, 무인잠수정을 이용한 수중탐지 등 산업, 과학, 군사 분야에 다양하게 이용될 수 있으며 최근 들어 미국을 비롯한 선진국을 중심으로 활발하게 연구되고 있다. 그러나 수중음향통신은 지상에서의 무선통신과 달리, 느린 음파 전달속도로 인한 전송대역의 제한과 다중경로에 의한 심볼간 간섭과 이로 인한 심각한 신호왜곡 등의 치명적인 문제점을 갖는다. 본 논문에서는 이러한 문제점 중, 다중경로에 의한 심볼간 간섭을 제거하기 위한 방법으로 단일반송파 전송방식을 사용하는 주파수영역등화(FDE) 기법과 다중반송파 전송방식을 사용하는 직교주파수분할다중화 기법(OFDM)을 수중음향통신 채널에 적용하여 그 성능과 수중통신에서의 적용성 여부를 판단하였다. 이를 위해 모의된 수중채널을 바탕으로, SC-FDE와 OFDM 방식의 성능을 SER 관점에서 비교하였다. 수중채널은 벨홉모델을 이용하여 모의하였으며, 모의실험 결과, SC-FDE는 OFDM에 비해 $10^{-3}SER$ 기점을 기준으로 약 5dB 이상의 SNR 이득이 발생하였다. 모의실험 결과를 통해, SC-FDE가 수중 음향통신에 효율적으로 적용 가능한 시스템임을 보였다.

La2/3TiO2.84 세라믹스의 전기전도특성 (Electrical Transport Properties of La2/3TiO2.84 Ceramic)

  • 정우환
    • 한국세라믹학회지
    • /
    • 제41권11호
    • /
    • pp.858-863
    • /
    • 2004
  • 본 연구는 입방정 L $a_{2}$ 3/Ti $O_{2.84}$ 세라믹스의 전기전도율, 열기전력 그리고 자기적 특성에 대하여 조사하였다. 350 K 이하의 은도영역에서의 입방정 L $a_{2}$ 3/Ti $O_{2.84}$ 세라믹스의 열기전력은 음으로 나타났다 열기전력은 온도의 증가와 더불어 선형적으로 증가하여 A+BT의 형태로 표현가능 하였으며, Emin과 Wood가 제안한 모델과 잘 일치하였다. 이와 같은 열기전력의 온도의존성은 L $a_{2}$ 3/Ti $O_{2.84}$ 세라믹스의 전도 carrier가 small polaron임을 의미한다. L $a_{2}$ 3/Ti $O_{2.84}$ 세라믹스는 실온 이하의 특정온도에서 variable range hopping에서 small polaron hopping으로 변화하였다. 저온영역에서는 직류전도 기구해석은 Mott의 접근방식을 이용하였다. Mott의 보조변수 해석결과 Fermi면에서의 상태밀도 [N( $E_{F}$)]는 3.18${\times}$$10^{20}$ $cm^{-3}$e $V^{-1}$이었으며, 무질서에너지 $W_{d}$는 0.93로 고온에서의 활성화 에너지 보다 매우 크다. 200K와 300K온도 범위에서 log($\sigma$T)와 1/T의 직선 관계가 존재 하였으며, small polaron의 hopping energy는 0.15 eV였다.

Effect of Solubilizing and Microemulsifying Excipients in Polyethylene Glycol 6000 Solid Dispersion on Enhanced Dissolution and Bioavailability of Ketoconazole

  • Heo, Min-Young;Piao, Zong-Zhu;Kim, Tae-Wan;Cao, Qing-Ri;Kim, Ae-Ra;Lee, Beom-Jin
    • Archives of Pharmacal Research
    • /
    • 제28권5호
    • /
    • pp.604-611
    • /
    • 2005
  • Polyethylene glycol (PEG) 6000-based solid dispersions (SDs), by incorporating various pharmaceutical excipients or microemulsion systems, were prepared using a fusion method, t o compare the dissolution rates and bioavailabilities in rats. The amorphous structure of the drug in SDs was also characterized by powder X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). The ketoconazole (KT), as an antifungal agent, was selected as a model drug. The dissolution rate of KT increased when solubilizing excipients were incorporated into the PEG-based SDs. When hydrophilic and lipophilic excipients were combined and incorporated into PEG-based SDs, a remarkable enhancement of the dissolution rate was observed. The PEG-based SDs, incorporating a self microemulsifying drug delivery system (SMEDDS) or microemulsion (ME), were also useful at improving the dissolution rate by forming a microemulsion or dispersible particles within the aqueous medium. However, due to the limited solubilization capacity, these PEG-based SDs showed dissolution rates, below 50% in this study, under sink conditions. The PEG-based SD, with no pharmaceutical excipients incorporated, increased the maximum plasma concentration (C$_{max}$) and area under the plasma concentration curve (AUC$_{0-6h}$) two-fold compared to the drug only. The bioavailability was more pronounced in the cases of solubilizing and microemulsifying PEG-based SDs. The thermograms of the PEG-based SDs showed the characteristic peak of the carrier matrix around 60$^{\circ}C$, without a drug peak, indicating that the drug had changed into an amorphous structure. The diffraction pattern of the pure drug showed the drug to be highly crystalline in nature, as indicated by numerous distinctive peaks. The lack of the numerous distinctive peaks of the drug in the PEG-based SDs demonstrated that a high concentration of the drug molecules was dissolved in the solid-state carrier matrix of the amorphous structure. The utilization of oils, fatty acid and surfactant, or their mixtures, in PEG-based SD could be a useful tool to enhance the dissolution and bioavailability of poorly water-soluble drugs by forming solubilizing and microemulsifying systems when exposed to gastrointestinal fluid.

이중 주파수 GPS 데이터를 이용한 저궤도 위성의 정밀궤도결정 (Precise Orbit Determination of LEO Satellite Using Dual-Frequency GPS Data)

  • 황유라;이병선;김재훈;윤재철
    • Journal of Astronomy and Space Sciences
    • /
    • 제26권2호
    • /
    • pp.229-236
    • /
    • 2009
  • 다목적실용위성-5호는 2010년 발사를 목표로 고도 550km의 저궤도에 위치하게 될 것이다. 다목적실용위성-5호의 임무인 고정밀 SAR(Synthetic Aperture Radar) 영상을 처리하기 위해서는 정확한 위성의 위치(20cm) 와 속도(0.03cm/s)가 결정되어야 한다. 이러한 요구 조건은 한국 전자통신연구원에서 개발한 ETRI GNSS Precise Orbit Determination(EGPOD) 소프트웨어로 검증하였다. 0.1Hz 수신 주기의 SAC-C 위성 반송파위상 데이터로 정밀궤도결정을 수행하였다. 이중 주파수 GPS 데이터를 사용하여 수신 선호의 전리층 오차를 대부분 제거하고 이중 차분된 데이터를 생성함으로써 GPS 위성과 수신기의 공통된 시계 오차를 없앴다. 동역학 모델 접근 방법을 이용하였고, Batch Least Square Estimator(BLSE) 필터로 각 데이터 아크(arc) 에 해당하는 위성의 위치와 속도, 대기저항 계수, 태양풍 계수를 추정하였다. 또한 정밀한 동역학 모델을 위하여 모델 되지 않은 부정확한 가속도 항을 보충하는 경험 가속도를 추가하였다. 경험 가속도는 위성의 공전 주기(revolution) 당 한번씩 시선방향(radial), 진행방향(along-track), 수직방향(cross-track)으로 추정하고, 수직방향의 상수 항에 대해서는 해당 데이터 아크에 관하여 부가적으로 추정하였다. 정밀궤도결정 결과 검증을 위하여 EGPOD 소프트웨어에서 얻어진 결과와 JPL에서 제공하는 정밀궤도력(Precise Orbit Ephemeris)을 비교하였다.

안전성 및 효율성 관점에서의 다목적 실선 실험 (Multi-Objective Onboard Measurement from the Viewpoint of Safety and Efficiency)

  • 이상원;;조익순
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2023년도 추계학술대회
    • /
    • pp.116-118
    • /
    • 2023
  • 최근 환경오염에 대한 규제 강화로 인해 선박 운항은 경제적이며 지속가능한 최적화 항법에 대한 필요성이 대두되고 있다. 하지만 기상예보 기술의 발전에도 불구하고, 여전히 잘못된 기상예보로 인한 악천후에 조우하는 선박 사고들은 지속적으로 발생하고 있다. 본 연구에서는 악천후에 조우하는 선박의 실태를 파악하고 분석하기 위해, 운항중인 선박의 정보를 측정하고자 하였다. 여기서 측정한 데이터의 종류는 항해 (위치, 속도, 방위, 타각 등) 및 엔진 (엔진 회전수, 출력, 축 추력, 연료 소비량) 관련 정보, 기상 상태 (바람, 파도), 선박운동 (선박종, 횡운동 등) 등의 정보들이 포함되었다. 실측 실험을 시행한 선박의 종류는 28,000 DWT급 벌크선, 63,000 DWT급 벌크선, 20,000 TEU급 컨테이너선, 12,000 TEU급 컨테이너선박이다. 각 선박의 실선실험은 여러 가지 종류의 데이터를 각각 취득하여 다목적으로 선박 운항에 관련한 연구들에 활용하고자 한다. 또한 실선실험 시의 해상 상태를 확인하기 위해, 파도 시뮬레이션 모델을 이용하여 방향성 파랑 스펙트럼 등을 재현하였다. 실선 실험의 데이터 취득 및 파도 시뮬레이션 결과 등을 통하여, 선박레이더를 이용한 정확한 파도정보 파악 및 화물 붕괴 사고 등에 대한 연구를 진행하고 있다. 이에 더불어, 선박운항의 안전성 및 효율성 관점에서 다양하게 활용될 것으로 기대된다.

  • PDF

컨테이너 운임에 미치는 영향요인 분석 (Analysis of Factors Affecting on the Freight Rate of Container Carriers)

  • 안영균;고병욱
    • 무역학회지
    • /
    • 제43권5호
    • /
    • pp.159-177
    • /
    • 2018
  • 국가 물류 인프라인 컨테이너 해운에 대한 합리적 투자 및 정책 결정을 하기 위해서는 컨테이너 해상운임의 결정요인에 대한 이해가 요구된다. 본 연구는 벡터오차수정모형(Vector Error Correction Model; VECM)을 사용하여 컨테이너 운임에 영향을 미치는 요인별 영향력을 추정하였다. 이를 위해 영국 클락슨이 공표하는 데이터를 사용하였으며, 분석결과 물동량 1.0% 증가 시 운임 4.2% 증가, 선복량 1.0% 증가 시 운임 4.0% 감소, 벙커유 가격 1.0% 증가 시 운임 0.07% 증가, Libor 1.0% 증가 시 운임은 0.04% 증가하는 것으로 추정되었다. 또한 현 운임이 장기균형 시점의 운임보다 1.0% 높을 경우 운임은 3.2% 차기에 감소하며, 장기균형 운임보다 1.0% 적을 경우 0.12% 차기에 감소하는 것으로 나타났다. 그러나 불황기 영향력은 통계적 유의성이 낮았으며, 이는 호황기에는 운임감소 압력이 뚜렷하나 불황기에는 운임상승 압력이 없는 것으로 이해된다. 이 같은 분석 결과는 향후 컨테이너 해운시장의 전망에 과학적인 접근법의 활용에 기여할 것으로 기대된다.

백서두개골 결손부에서 키토산/흡수성 콜라겐 전달체의 골재생 (The effect of chitosan/ACS on bone regeneration in rat calvarial defects)

  • 김수경;석헌주;김창성;조규성;채중규;김종관;최성호
    • Journal of Periodontal and Implant Science
    • /
    • 제33권3호
    • /
    • pp.457-474
    • /
    • 2003
  • The ultimate objective of periodontal treatment is to get rid of an on-going periodontal disease and further regenerate the supporting tissue, which is already destroyed, functionally. Currently, the bone grafting operation using various kinds of bone grafting materials and the operation for induced regeneration of periodontal tissue using the blocking membrane are performed for regeneration of the destroyed periodontal tissue. However, there are respective limitations Galenical preparations, which are used for regeneration of periodontal of tissue, has less risk of rejective reaction or toxicity that may be incidental to degradation and their effect is sustainable. Thus, in case they are applicable to a clinic, they can he used economically. Chitosan has such compatibility, biological actions including antibacterial activity, acceleration of wound treatment, etc., and excellent mechanical characteristics, which has recently aroused more interest in it. Also, it has been reported that it promotes osteogenesis directly or indirectly by functioning as a matrix to promote migration and differentiation of a specific precussor cell (for example, osteoblast) and further inhibiting the function of such a cell as fibroblast to prevent osteogenesis. In this study, the pure chitosan solution, which was obtained by purifying chitosan, was used. However, since this chitosan is of a liquiform, it is difficult to sustain it in a defective region. It is, therefore, essential to use a carrier for delivering chitosan to, and sustaining it gradually in the defective region. In the calvarial defect model of the Sprague-Dawley rat, it is relatively easy to maintain a space. Therefore, in this study, the chitosan solution with which ACS was wetted was grafted onto the defective region, For an experimental model, a calvarial defect of rat m s selected, and a critical size of the defective region was a circular defect with a diameter of 8 mm. A group in which no treatment was conducted for the calvarial defect was set as a negative control group. Another group in which treatment was conducted with ACS only was set as a positive control group (ACS group). And another group in which treatment was conducted was conducted with by grafting the pure chitosan solution onto the defective region through ACS which was wetted with the chitosan solution was set an experimental group (Chitosan/ACS group). Chitosan was applied to the Sprague-Dawley rat's calvarial bone by applying ACS which was wetted with the chitosan solution, and each Sprague-Dawley rat was sacrificed respectively 2 weeks and 8 weeks after the operation for such application. Then, the treatment results were compared and observed histologically and his tometrically. Thereby, the following conclusions were obtained. 1. In the experimental group, a pattern was shown that from 2 weeks after the operation, vascular proliferation proceeded and osteogenesis proceeded through osteoblast infiltration, and at 8 week after the operation, ACS was almost absorbed, the amount of osteogensis was increased and many osteoid tissue layers were observed. 2. At 2 weeks after the operation, each amount of osteogenesis appeared to be 8.70.8 %, 13.62.3 % and 4.80.7 % respectively in the experimental group, the positive control group and the negative control group. Accordingly, it appeared to be higher in the Experimental group and the positive control group than in the negative control group, but there was no significant difference statistically (p<0.01). 3. At 8 weeks after the operation, each amount of osteogenesis appeared to be 62.26.1%, 17.42.5 % and 8.21.4 % respectively in the experimental group, the positive control group and the negative control group. Accordingly, it appeared to be substantially higher in the experimental group than in the positive control group and the negative control group, and there was a significant difference statistically (p<0.01). As a result of conducting the experiment, when ACS was used as a carrier for chitosan, chitosan showed effective osteogenesis in the perforated defective region of the Sprague-Dawley rat's calvarial bone.