• 한국건설순환자원학회논문집
• /
• 제12권1호
• /
• pp.8-16
• /
• 2024

포틀랜드 시멘트, 철강 산업 등에서 원료로 사용되는 석회석(CaCO₃, calcium carbonate)은 고온에서 탈탄산 분해 반응에 의해 CO₂를 배출한다. 석회석 사용에 의한 CO₂ 배출을 저감하기 위해 CO₂ 배출의 원인이 되는 carbonate 광물을 함유하지 않거나 함유량이 적으면서도 CaO를 함유한 산업부산물로 석회석을 대체하려는 기술이 제안되었다. 이들 산업부산물에 함유된 CO₂를 정량 측정하는 방법으로 Loss of Ignition(LOI), Thermo-Gravimetric Analysis(TG), Infrared Spectroscopy(IR) 등이 사용되나, 산업부산물의 특성에 따라 CO₂ 배출량을 과대 또는 과소 평가할 우려가 있다. 본 연구에서는 CaCO₃ 시료와 고온에서 산화반응에 의해 중량이 증가하는 시료 각각에 carbonate 형태로 함유된 CO₂의 함량을 측정하는 방법으로 LOI, TG, IR 및 DTG(Differential Thermo-Gravimetric Analysis) 방법의 신뢰도와 시험방법별 측정결과를 비교 검토하였다. CaCO₃ 시료에 대해서는 검토한 모든 시험결과는 충분한 수준의 신뢰도를 나타내었다. 반면, 고온에서 중량이 증가하는 시료의 CO₂ 함량에 대해서는 LOI와 TG는 시료의 CO₂ 함량을 제대로 평가하지 못했으며, IR은 예측값에 비해 CO₂ 함량을 과대평가하는 경향을 나타내었으나, DTG에 의한 평가 결과는 예측값에 근사하였다. 이로부터 수 % 미만 수준의 미량의 CO₂를 함유하고, carbonate 광물의 분해 배출 온도에서 CO₂ 배출에 의한 중량 감소 외에도 중량이 변화하는 시료의 경우 DTG를 이용하여 CO₂ 함량을 구하는 것이 LOI나 TG, IR을 이용한 평가보다 합리적이라고 판단된다.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.177-186
• /
• 2000

The molten carbonate fuel cell has conspicuous features and high potential in being used as an energy converter of various fuels to electricity and heat. However, the MCFC which use strongly corrosive molten carbonate at $650^{\circ}C$ have many problem. Systematic investigation on corrosion behavior of Fe/20Cr/Ti has been done in (62+38)mol % (Li+K) $CO_3$ melt at 923K by using. steady state polarization and electrochemical impedance spectroscopy method. It found that the corrosion current of these Febased alloys decreased with increasing Ti content, and this attribute to the formation of $LiCrO_2$ layer at the surface.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.831-835
• /
• 1996

The molten carbonate fuel cell has conspicuous features and high potential in being used as an energy converter of various fuels to electricity and heat. However, the MCFC which use strongly corrosive molten carbonate at 650[.deg. C] have many problem. Systematic investigation on corrosion behavior of Fe-based Cr has been done in ($62{\times}38$)mol % (Li+K)$CO_3$ melt at 923K by using steady state polarization and electrochemical impedance spectroscopy method. It was found that the corrosion current of these Fe-based alloys decreased with increasing Cr content, and this was attributed to the formation of $LiCrO_2$ layer at the surface .

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.65-70
• /
• 1993

The effect of particle size of Al powder, water repellent agent and finishing agent on frost resistance, absorption ratio and structure of micropore was examined to improve the physical properties and durability of ALC. According as the amount added of water repellent agent was increased, frost resistance was improved and absorption ratio was decreased. From one side freezing /thaw test, finishing agent which has a low vapor permeation located the crack at close indoor point of ALC specimen. ALC produced from fine Al powder has a low volume reduction by scalling and a sound appearance after freezing/thawing test and top surface freezing test, The crystal of tobermorite in ALC matrix was converted to calcium carbonate by carbonation which was accelerated with the decreasing of water content. Since the micropore of ALC was filled up by calcium carbonate, void ratio was reduced and crack was detected after complete carbonation.

• 한국농공학회지
• /
• 제44권6호
• /
• pp.115-123
• /
• 2002

This study was performed to provide basic data for development and construction of reinforced soil wall that mixed with reinforcements such as calcium carbonate, monofilament fiber. In order to determine proper moisture content and mixing ratio by weight of reinforcement, Poisson's ratio and compressive strength tests for sandy soil had been conducted. Model tests for long-term behavior of reinforced soil wall were carried out to investigate the effect of reinforcement during loads and under static loads. The results of creep and model tests for sandy soil compared with clayey soil. Reinforced sandy soil mixed with calcium carbonate and cement showed brittle rupture by shear but that of mixed with monofilament fiber showed ductile rupture due to the tension force of fiber. It was shown that when age increased, creep strain of reinforced soil under sustained load approached constant values.

• 한국안전학회지
• /
• 제5권3호
• /
• pp.63-68
• /
• 1990

The effects of various brominated flame retardants were investigated in PC/ABS blend system. The compatibilities between polymers and flame retardants were expected with the solubility parameter using group contribution theory. Tetrabromobisphenol A carbonate oligomer, among the flame retardants in this experiment, has been shown good miscibility for PC and ABS, respectively. But polydibromophenylene oxide and octabromodiphenyl oxide has immiscibility. The flame retardant PC/ABS blends containning tetrabromobisphenol A carbonate oligomer have been exhibited higher mechanical properties, tensile strengths and notch Izod impact strengths, at varlous content of flame retardants, than containning other flame retardants. It could be seen that the trends of mechanical properties for the flame retardant PC/ABS blends have a good concidence with the expectation of compatibility.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.67-70
• /
• 2000

This study was performed to investigate the material behavior of hybrid thermoplastic composites contained glass fiber and calcium carbonate. The composite was prepared with each combination ratio of calcium carbonate, and the content of glass fiber was fixed with 10% by weight. In order to investigate the material behavior for various combination ratio, tension test, flexural test, and impact test were performed. Microscopic observation were conducted to examine the fractured surface of specimen for tension test. And the material behavior of the hybrid thermoplastic composite immersed in salt water with definite time was investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.157-159
• /
• 2001

The molten carbonate fuel cell has conspicuous feature and high potential in being used as an energy converter of various fuel to electricity and heat. However, the MCFC which use strongly corrosive molten carbonate at 650$^{\circ}C$ have many problem. Systematic investigation on corrosion behavior of Fe/20Cr/Ti alloys has been done in (62+38)mol% (Li+K)CO$_3$ melt at 923K by using steady state polarization and electrochemical impedance spectroscopy method. And, The research and development for the solid oxide fuel cell have been promoted rapidly and extensively in recent years, because of their high efficiency and future potential. Therefore this paper describes the manufacturing method and characteristics of anode electrode for SOFC, by the way, Ni-YSZ materials are used as anode of SOFC widely. So in this experiments, we investigated the optimum content of Ni, by the impedance characteristics, overvoltage. As a result, the performance of Ni-YSZ anode(47vo1%) was bettor excellent than the others.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.927-933
• /
• 2000

The molten carbonate fuel cell has conspicuous feature and high potential in being used as an energy converter of various fuel to electricity and heat. However, the MCFC which use strongly corrosive molten carbonate at 650$^{\circ}C$ have many problem. Systematic investigation on corrosion behavior of Fe/20Cr/Ti alloys has been done in (62+38)mol% (Li+K)CO3 melt at 923K by using steady state polarization and electrochemical impedance spectroscopy method. And, The research and development for the solid oxide fuel cell have been promoted rapidly and extensively in recent years, because of their high efficiency and future potential. Therefore this paper describes the manufacturing method and characteristics of anode electrode for SOFC, by the way , Ni-YSZ materials are used as anode of SOFC widely. So in this experiments, we investigated the optimum content of Ni, by the impedance characteristics, overvoltage. As a results, the performance of Ni-YSZ anode(40vo1%) was better excellent than the others.

• Journal of the korean society of oceanography
• /
• 제31권4호
• /
• pp.207-216
• /
• 1996

A geochemical study of three piston cores (ST.4, ST.6 and ST.20) taken from the Northwest Pacific (eastern edge of Shikoku Basin) provides information about changes in surface water paleoproductivity and sedimentation during the last 127 kys. Paleoproductivity variations were estimated on the basis of total organic carbon content and carbonate mass accumulation rate. The paleoproductivity based on total organic carbon shows significant spatial variations between glacial and interglacial periods. During the last glacial maximum (LGM) paleoproductivity increased about 1.5 times with deglaciation decrease compared with those of the Holocene at inner side of the Shikoku Basin (ST.4 and ST.6). On the other hand, paleoproductivity at outer side of Shikoku Basin (ST.20) indicating not distinctive increase but deglaciation increase. The C/N ratios fall below 10 for cores ST.4 and ST.6, but C/N ratios between 100 ka and 80 ka in ST.20 which show around 10 or larger values suggest a predominance of marine organic carbon with some admixture of terrigenous materials. The carbonate mass accumulation rate of three cores show different patterns of calcareous record with respect to organic carbon based paleoproductivity variation. In the inner side of Shikoku Basin (ST.4 and ST.6) the carbonate mass accumulation rate decreased during last glacial maximum, and significant increase of carbonate mass accumulation rate is recognized at outer side of Shikoku Basin (ST.20). Thus, this set of data reveals that spatial paleoproductivity variations between inner and outer side of Shikoku Basin during the glacial and interglacial periods.