• 소성∙가공
• /
• 제22권3호
• /
• pp.158-164
• /
• 2013

The spheroidization behavior of cementite in a SK85 high carbon steel was investigated in this study. Fine and coarse pearlite microstructures were obtained by appropriate heat treatments according to the TTT diagram of SK85 high carbon steel. Hot rolled plates of SK85 steel were austenitized at $800^{\circ}C$ for 2 hrs and then put directly into a salt bath at either $570^{\circ}C$ or $670^{\circ}C$ to obtain a fine pearlite (FP) structure and a coarse pearlite (CP) structure, respectively. Cold rolling was subsequently conducted on those specimens with reduction ratios from 0.2 to 0.4. Spheroidization heat treatments were conducted at the subcritical temperatures of 600 and $720^{\circ}C$ for 1 to 32 hrs to elucidate the effect of initial microstructures, heat treatment temperature, and cold reduction ratios on the cementite spheroidization rate. Spheroidization proceeded with fragmentation of cementite plates, spheroidization of the cementite platelets, and coarsening consecutively. Mechanical fragmentation of cementite by cold rolling expedited the rate of spheroidization. The spheroidization rate of FP was much more rapid than that of CP and the spheriodization rate increased with increases in the cold reduction ratio.

• 한국연초학회지
• /
• 제14권1호
• /
• pp.33-41
• /
• 1992

These studies were conducted to investigate effects of phytohormone and activated carbon on the growth and rooting of teratoma shoots induced from Nicotiana tabacum cv. NC2326 transformed by Aerobacterium tumefaciens C58. GA was effective for shoot elongation and reduction of multiple shoots from teratoma shoot, however, leaves of teratoma shoot cultured on the medium with GA were pointed. ABA was also effective in promoting shoot elongation, but was not for reduction of multiple shoots. Teratoma shoot cultured on the medium with 1 n activated carbon promoted shoot elongation and inhibited the number of shoots differentiated, but was grown as abnormal shoot. Addition of 1% activated carbon and 0.5mg/l BA to culture media was effective for shoot elongation and reduction of multiple shoot and for formation of round leaves as normal leaves. Though these shoots were inoculated on the rooting medium, they could not from roots but formed multiple shoots. Boric acid, myo-inositol and sucrose were also ineffective on the rooting of teratoma shoots.

• 자원ㆍ환경경제연구
• /
• 제25권2호
• /
• pp.299-320
• /
• 2016

본 연구는 자료포락분석의 target-setting approach를 기초로 우리나라 16개 지자체의 에너지 효율성을 추정하고, 에너지 효율향상을 통해 저감할 수 있는 에너지 소비수준을 계측한다. 나아가 에너지 믹스변화에 의한 지역별 환경성과를 분석하고 그에 따른 이산화탄소 감축효과를 평가한다. 분석결과, 표본기간 2004년~2013년 동안 평균적으로 14.0%의 에너지 비효율이 존재하며, 특히 석유연료의 비효율적 사용이 주요 광역시를 중심으로 크게 나타났다. 또한 에너지 소비구조의 변화를 통해 에너지 효율향상과 추가적인 이산화탄소 저감가능성이 발생하며, 적극적인 에너지 믹스전략의 필요성을 확인할 수 있었다.

• Carbon letters
• /
• 제8권2호
• /
• pp.120-126
• /
• 2007

The effect of cobalt precursor on the structure of Co supported multi-walled carbon nanotubes (MWCNTs) were studied by using X-ray photoelectron spectroscopy (XPS). MWCNTs were treated with a mixture of nitric and sulfuric acids and decorated with cobalt and/or cobalt oxides via aqueous impregnation solutions of cobalt nitrate or cobalt acetate followed by reduction in hydrogen. XPS was mainly used to investigate the phase of cobalt on MWCNTs after reduction with $H_2$ flow at $400^{\circ}C$ for 2 h. Higher cobalt-nanoparticle dispersion was found in the MWCNTS prepared via cobalt nitrate decomposition. A typical XPS spectrum of Co 2p showed the peaks at binding energy (BE) values equal to 781 and 797 eV, respectively. It is found that cobalt nitrate supported MWCNTs is more dispersive and have catalytic activity than that of cobalt acetate supported MWCNTs at same preparation condition such as concentration of precursor solution and reduction environment.

• 자원리싸이클링
• /
• 제25권4호
• /
• pp.54-59
• /
• 2016

전기로 공정에서 슬래그는 Fe를 약 20 ~ 35 wt.% 함유한 채로 슬래그 포트로 배출되어 냉각되고 있다. 슬래그 배출 전에 환원하여 용강으로 회수한다면 제강회수율을 향상할 수 있으며, 슬래그 배출량을 감소할 수 있다. 일반적으로 전기로 공정에서는 슬래그 포밍과 (FetO)의 환원제로 카본계의 환원제가 활용되고 있다. 본 실험은 Metal을 유도용해로에 용해한 후 슬래그와 환원제로 흑연분탄과 저가의 Al dross powder를 Pellet으로 투입하여 (FetO)의 환원 회수와 복인(復燐)에 대한 영향성을 조사하였다. 실험결과 Al dross에 의한 환원 회수율은 흑연분탄에 비해 2.5배 이상의 효과를 나타내었으며, 복인(復燐)에 대한 영향은 50 ppm 이하로 크지 않은 것으로 나타났다.

• 공업화학
• /
• 제9권4호
• /
• pp.475-480
• /
• 1998

본 연구에서는 고밀집 glassy carbon (GC) 섬유 다발체 전극 전해계를 사용하여 우라늄 (VI)를 함유한 유기상과 질산 수용상의 혼합상에서 전해 역추출시 우라늄 (VI) 환원 전해특성 연구가 수행되었고, 이에 관한 전해 역추출 모델을 제시하였다 우라늄 (VI) 전해환원 반응은 혼합상 내의 수용상에서 보다 혼합상 내의 유기상에서 빨리 일어났다. 유기상의 유속이 증가하는 경우 역추출 과정에서 유기상 내 우라늄 이온의 확산 저항 증가에 의해서 수용상으로의 역추출은 증가하다 일정하게 되었으며, 수용상 유속 변화는 총 우라늄 (VI) 환원전류에는 영향을 주지 않았다. 전해반응이 없는 경우보다 전해 반응이 동반되는 경우 우라늄 역추출이 보다 효과적으로 이루어 짐을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.664-668
• /
• 2002

본 연구에서는 전해 도금되어진 활성탄소섬유(activated carbon fibers; ACFs)가 NO 환원거동에 미치는 영향에 대하여 고찰해보았다. 전해도금 시간이 증가함에 따라 탄소표면의 구리의 양은 점차 증가하였으나, 활성탄소섬유의 흡착 특성인 잘 발달된 비표면적 등의 기공구조는 약간씩 감소하는 경향을 보였다. 본 실험 결과, ACFs 및 ACFs/Cu 촉매 표면에서 $500^{\circ}C$로 NO를 반응시켰을 때 NO가 $N_2$ 및 $O_2$로 환원되는 것을 확인하였다. 특히, ACFs/Cu 촉매를 사용한 반응에서는 촉매반응 중 발생하는 산소를 촉매표면에서 잡아주는 역할을 하는 것으로 관찰되었다. 이는 NO환원에 있어서 ACFs와 ACFs/Cu 촉매 사이에 다른 기작이 있다는 것을 보여주는 것으로 생각되어진다.

• 자원리싸이클링
• /
• 제13권5호
• /
• pp.17-22
• /
• 2004

본 연구는 탄소 환원반응을 이용하여 ilmenite 중 $TiO_2$의 품위 향상을 목적으로 ilmenite 중에 존재하는 철산화물의 탄소환원에 가장 효과적인 첨가물과 최적조건을 검토하였다. Ilmenite 중 철산화물의 환원에 가장 적절한 환원제의 종류 및 첨가량은 $FeCl_3$로서 ilmenite 시료무게의 2 wt.%이었고, 또한 최적의 탄소환원제 양은 당량비로 2배였다. 그리고 적절한 환원온도 및 시간은 $1100^{\circ}C$ 부근으로서 대부분 철산화물의 환원반응이 종료되는 30분 정도로 조사되었다. 이와 같은 조건하에서 얻어진 환원반응 생성물은 자력선별 공정을 거치면 rutile의 대체 자원으로 사용이 가능함을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.199-200
• /
• 2023

Eco-friendly concrete contains only 5% of cement yet achieves equal or greater strength compared to conventional concrete, reducing salt-attack impact and hydration heat by more than 30% and ensuring higher construction quality for underground structures. Furthermore, eco-friendly concrete can reduce up to 90% of carbon dioxide emissions compared to traditional concrete, enabling a reduction of approximately 6,000 tons of carbon emissions for 1,000 of apartment units construction. This is equivalent to planting around 42,000 trees

• 한국토양비료학회지
• /
• 제47권5호
• /
• pp.374-380
• /
• 2014

To estimate greenhouse gas (GHG) emission, the inventory of rice cultivation at the farming without agricultural chemicals was established from farmers in Gunsan, Jeonbuk province in 2011~2012. The objectives of this study were to calculate carbon footprint and analyse the major factor of GHGs. To do this, we carried out a sensitivity analysis using the analyzed main factors of GHGs and estimated the mitigation potential of GHGs. Also we suggested agricultural methods to reduce GHGs that can be appled by farmers at this region. At the farming system without agricultural chemicals, carbon footprint of rice production unit of 1 kg was 2.15 kg $CO_2.-eq.kg^{-1}$. Although the amount of carbon dioxide ($CO_2$) emission was the largest among GHGs, methane ($CH_4$) emission had the highest contribution to carbon footprint on rice production system when it was converted to carbon dioxide equivalent ($CO_2-eq.$) multiplied by the global warming potential (GWP). Main source of $CO_2$ emission in the rice farming system without agricultural chemicals was combustion of fossil fuels used by agricultural machinery. Most of the $CH_4$ was emitted during rice cultivation practice and its major emission factor was flooded paddy field in anaerobic condition. Also, most of the $N_2O$ was emitted from rice cultivation process. Major sources of the $N_2O$ emission was application of fertilizer such as compound fertilizer. As a result of sensitivity analysis in energy consumption, diesel had the highest sensitivity among the energy inputs. With the reduction of diesel consumption by 10%, it was estimated that $CO_2$ potential reduction was about 2.0%. With reducing application rate of compound fertilizer by 10%, the potential reduction was calculated that $CO_2$ and $N_2O$ could be reduced by 0.5% and 0.9%, respectively. At the condition of 10% reduction of silicate and compost, $CO_2$ and $CH_4$ could be reduced by 1.5% and 1.6%, respectively. With 8 days more drainage than the ordinary practice, $CH_4$ emission could be reduced by about 4.5%. Drainage and diesel consumption were the main sources having the largest effect on the GHG reduction at the farming system without agricultural chemicals. Based on the above results, we suggest that no-tillage and midsummer drainage could be a method to decrease GHG emissions from rice production system.