• Microbiology and Biotechnology Letters
• /
• v.26 no.5
• /
• pp.442-449
• /
• 1998

Several transglucosylated xylitols were synthesized using intermolecular transglucosylation reaction of cyclodextrin glucanotransferase (CGTase) and their bifidogenic effects were investigated. The CGTase from Thermoanaerobacter sp. showed the highest transglycosylation activity on xylitol compared to those obtained from other strains. Extruded starch was identified to be the most suitable glucosyl donor for transglucosylation reaction on xylitol molecule by CGTase. The optimum reaction conditions for transglucosylation were also studied using extruded starch as a glucosyl donor. The transglucosylated xylitols were purified by activated carbon column chromatography with ethanol gradient elution from 0 to 18%, and their chemical structures were analyzed by fast atom bombardment mass spectrometer, $\^$13/C-nuclear magnetic resonance spectrometer, and enzyme digestion method. Two transglucosylated xylitol, F-I and F-II, which had one or two glucose molecules attached to maternal xylitol by ${\alpha}$-1,4-linkage, were mainly obtained. F-II showed increased stimulation effect on the growth of Bifidobacterium breve compared to xylitol, indicating the possibility utilized as a new functional alternative sweetners having bifidogenic effects.

• Smart Structures and Systems
• /
• v.14 no.5
• /
• pp.811-830
• /
• 2014

A numerical study has been carried out to simulate an innovative monitoring procedure to detect and localize damage in reinforced concrete beams retrofitted with carbon fiber reinforced polymer (CFRP) unidirectional laminates. The main novelty of the present simulation is its ability to conduct the electromechanical admittance monitoring technique by considerably compressing the amount of data required for damage detection and localization. A FEM simulation of electromechanical admittance-based sensing technique was employed by applying lead zirconate titanate (PZT) transducers to acquire impedance spectrum signatures. Response surface methodology (RSM) is finally adopted as a tool for solving inverse problems to estimate the location and size of damaged areas from the relationship between damage and electromechanical admittance changes computed at PZT transducer surfaces. This statistical metamodel technique allows polynomial models to be produced without requiring complicated modeling or numerous data sets after the generation of damage, leading to considerably lower cost of creating diagnostic database. Finally, a numerical example is carried out regarding a steel-reinforced concrete (RC) beam model monotonically loaded up to its failure which is also retrofitted by a CFRP laminate to verify the validity of the present metamodeling monitoring technique. The load-carrying capacity of concrete is predicted in the present paper by utilizing an Ottosen-type failure surface in order to better take into account the passive confinement behavior of retrofitted concrete material under the application of FRP laminate.

• Structural Engineering and Mechanics
• /
• v.65 no.6
• /
• pp.679-687
• /
• 2018

In composite materials technology, the fiber-reinforced polymers (FRP) have opened up new horizons in infrastructural engineering field for strengthening existing structures and components of structure. The Carbon fiber reinforced polymer (CFRP) sheets are well suited for RC columns to this application because of their high strength to weight ratio, good fatigue properties and excellent resistance to corrosion. The main focus of present experimental work is to investigate effect of shapes on axial behavior of CFRP wrapped RC columns having same cross-sectional area and slenderness ratio. The CFRP volumetric ratio and percentage of steel are also adopted constant for all the test specimens. A total of 18 RC columns with slenderness ratio four were cast. Nine columns were control and the rest of nine columns were strengthened with one layer of CFRP wrap having 35 mm of corner radius. Columns confined with CFRP wrap were designed using IS: 456:2000 and ACI 440.2R.08 provisions. All the test specimens were loaded for axial compression up to failure and failure pattern for each shaped column was investigated. All the experimental results were compared with analytical values calculated as per the ACI-440.2R-08 code. The test results clearly demonstrated that the axial behavior of CFRP confined RC columns is affected with the change in shapes. The axial deformation is higher in CFRP wrapped RC circular column as compared to square and rectangular columns. Stress-strain behaviour revealed that the yield strength gained from CFRP confinement was significant for circular columns as compare to square and rectangular columns. This behaviour may be credited due to effect of shape on lateral deformation in case of CFRP wrapped circular columns at effective confinement action.

• Membrane and Water Treatment
• /
• v.7 no.5
• /
• pp.417-431
• /
• 2016

Poly(vinylidene fluoride) (PVDF) powder was treated with aqueous sodium hydroxide to obtain partially defluorinated fluoropolymers with expected properties such as improving hydrophilicity and fouling resistance. Raman spectrum and FT-IR results confirmed the existence of conjugated carbon double bonds after alkaline treatment. As the concentration increased, the degree of defluorination increased. The morphology and structure of membranes were examined. The permeation performance was investigated. The results showed that membrane's hydrophilicity increased with increase of the percentage of alkaline treated PVDF powder. Moreover, in terms of the water contact angle, it decreased from $92^{\circ}$ to a minimum of $68^{\circ}$; while water up take increased from 128 to 138%. Fluxof pure water and the cleaning efficiency increased with the increase of alkaline treated PVDF powder. The fouling potential also decreased with the increase of the percentage of alkaline treated PVDF powder. The reason that makes blending PVDF show different characteristics because of partial defluorination, which led the formation of conjugated C = C bonds and the inclusion of oxygen functionalities. The polyene structure followed by hydroxide attack to yield hydroxyl and carbonyl groups. Therefore, the hydrophilicity of blending membrane was improved. The SEM and porosity measurements showed that no obvious variations of the pore dimensions and structures for blend membranes were observed. Mechanical tests suggest that the high content of the alkaline treated PVDF result in membranes with less tolerance of tensile stress and higher brittleness. TGA results exhibited that the blend of alkaline treated PVDF did not change membrane thermal stability.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.1-9
• /
• 2010

Since carbon dioxide, $CO_2$, was revealed as a major greenhouse gas, techniques for its separation, capture, and storage have received increasing interest in recent years. Aqueous amines are the most widely accepted $CO_2$ absorbents, but they cause the problems such as high regeneration energy, thermal degradation, and loss of absorbents due to their volatility. Ionic liquids having high thermal stability, extremely low vapor pressure, and capability of selectively absorbing specific gases have been proposed as new $CO_2$ capturing solvents which may potentially replace aqueous amines. By reviewing the ionic liquids having capability to absorb $CO_2$ reported in previous papers, we seek to develop a comprehensive understanding on the factors that influence the $CO_2$ solubility in ionic liquids such as their structures, absorption temperature, pressure, water content, etc., and to estimate the potential of ionic liquids as $CO_2$ separating media.

• Mycobiology
• /
• v.38 no.4
• /
• pp.274-281
• /
• 2010

Cordyceps cardinalis was reported in Japan and the USA in 2004, and its fruiting bodies have recently been cultured in Korea. Herbarium specimens preserved at the Cordyceps Research Institute, Mushtech, Korea were revised and identified as C. cardinalis, based on morphological characters and conidial structures. Most of the C. cardinalis specimens were collected from Mt. Halla in Jeju-do. The effects of various nutritional sources and environmental conditions such as temperature and pH on mycelial growth of C. cardinalis were studied. Oatmeal agar, Martin's peptone dextrose agar, and Schizophyllum (mushroom) genetics complete medium plus yeast extract resulted in the best mycelial growth. Among carbon sources, cereals, and nitrogen sources, maltose, oatmeal, and peptone resulted in the best mycelial growth respectively. Mineral salts helped to increase growth rate but only resulted in thin mycelial density, similar to water agar. A temperature of $25^{\circ}C$ and a pH of 7 resulted in the highest mycelial growth. Based on these results, a Cordyceps cardinalis composite medium (CCM) was formulated with 1% maltose, 2% oatmeal, 1% peptone, and 2% agar. Use of the CCM resulted in slightly better mycelial growth than that of other commonly used agar media. Only organic nitrogen sources imparted a reddish pigmentation to the agar media, but this character diminished after several subcultures. A 7 day culture duration resulted in the best mycelial growth.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.222-225
• /
• 2009

The apartment housing in Korea has been rapidly constructed by adapting the most suitable construction methods as like wall structure, wet and united construction. But most of short-lived equipments usually filled in the structure which has longer life, and it causes not only to make difficult coping with the deterioration of equipments but also to let buildings remained deteriorate themselves. The buildings can be remodelled to slow down the terms of deterioration or reconstructed to give a new life of themselves, although the disposal of wastes or the lack of natural resources still be problems and unsolved that can occurred in pulling down and reconstructing the buildings. Furthermore, it is the time to need keeping with worldwide trends and movements as like sustainability or 'green growth' movements based on low carbon emissions. The researches for Long-Life Housing apartments which has durability and variation have been advanced up to now. Long-Life Housing apartments can separate their structures from equipments and interior or exterior materials of buildings. Therefore equipments or materials of buildings can be easily repaired and replaced with new ones, even if they are deteriorated themselves. Also, the construction process of Long-Life Housing apartments can be independent from the matter of proprietary rights, terms of durability, decision rights and so on. 'The law of Possession and Management of Collective Building' and the 'Regulation of Management of Collective Building' established by each local governments are already legislated for declaring the rights of using and ownership, responsibilities of each parts of apartment buildings. These laws and regulations classify the ownership of each parts of apartment buildings, and divide the ownership with public possession and exclusive possession. Therefore, this study will conduct comparative analysis between 'The law of Possession and Management of Collective Building' and 'the Regulation of Management of Collective Building' and find problems which can be occurred in future construction of Long-Life Housing apartments. It will be helpful to revise laws and regulations.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.175-184
• /
• 2004

When the columns of existing RC structures are repaired with FRP composites, the core concrete of the columns is confined by both materials of steel spirals (or steel hoops) and FRP composites because the FRP composites wrap the existing columns which have been already confined with steel spirals or hoops. As the stress-strain curves of steel and fiber are different to each other, the behavior of concrete columns confined with both steel spiral and FRP composites is also different to that of concrete columns confined with only steel spiral or FRP composites. Twenty four RC cylinders were tested in order to observe the behavior of RC cylinders confined with both materials. The observed results of the test showed that the behavior of the test cylinders confined with both materials was quite different to that of cylinders confined with only one material.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.757-762
• /
• 2010

Owing to the high specific strength and stiffness of composite materials, they are extensively used in mechanical systems and in vehicle industries. However, most mechanical structures experience repeated load and fatigue. Therefore, it is important to perform fatigue analysis of fiber-reinforced composites. The properties of composite laminates vary depending upon the stacking sequence and stacking direction. Fatigue damage of composite laminates occurs according to the following sequence: matrix cracking, delamination, and fiber breakage. In this study, fatigue tests were performed for damage analysis. Fatigue damages, which have to be considered in fatigue analysis, are determined by using the stiffness values calculated from hysteresis loops, and the obtained fatigue damage curve is examined using Mao's equation and Abdelal's equation.

• Smart Structures and Systems
• /
• v.19 no.3
• /
• pp.309-322
• /
• 2017

In this paper, the buckling, and free vibration analysis of tapered functionally graded carbon nanotube reinforced composite (FG-CNTRC) micro Reddy beam under longitudinal magnetic field using finite element method (FEM) is investigated. It is noted that the material properties of matrix is considered as Poly methyl methacrylate (PMMA). Using Hamilton's principle, the governing equations of motion are derived by applying a modified strain gradient theory and the rule of mixture approach for micro-composite beam. Micro-composite beam are subjected to longitudinal magnetic field. Then, using the FEM, the critical buckling load, and natural frequency of micro-composite Reddy beam is solved. Also, the influences of various parameters including ${\alpha}$ and ${\beta}$ (the constant coefficients to control the thickness), three material length scale parameters, aspect ratio, different boundary conditions, and various distributions of CNT such as uniform distribution (UD), unsymmetrical functionally graded distribution of CNT (USFG) and symmetrically linear distribution of CNT (SFG) on the critical buckling load and non-dimensional natural frequency are obtained. It can be seen that the non-dimensional natural frequency and critical buckling load decreases with increasing of ${\beta}$ for UD, USFG and SFG micro-composite beam and vice versa for ${\alpha}$. Also, it is shown that at the specified value of ${\alpha}$ and ${\beta}$, the dimensionless natural frequency and critical buckling load for SGT beam is more than for the other state. Moreover, it can be observed from the results that employing magnetic field in longitudinal direction of the micro-composite beam increases the natural frequency and critical buckling load. On the other hands, by increasing the imposed magnetic field significantly increases the stability of the system that can behave as an actuator.