• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2155-2161
• /
• 2013

Composite materials of mesoporous carbon and carbon nanotubes were synthesized using Ni, Co and Pd-loaded CMK3 via a catalytic reaction of methane and $CO_2$. The CNTs grew from the pores of the mesoporous carbon supports, and they were attached tightly to the CMK3 surface in a densely tangled shape. The CNT/CMK3 composite showed both non-graphitic mesoporous structures, and graphitic characteristics originating from the MWCNTS grown in the pores of CMK3. The electrochemical properties of the materials were characterized by their electrorheological effects and cyclic voltammetry. The CNTs/CMK3 composites showed high electrical conductivity and current density. The CNT/CMK3 or KOH-modified CNT/CMK3 particles were incorporated in a PMMA matrix to improve the thermal and electrical conductivity. Even higher thermal conductivity was achieved by the addition of KOH-modified CNT/CMK3 particles.

• 약학회지
• /
• 제32권3호
• /
• pp.187-193
• /
• 1988

An activated carbon which showed big adsorption capacities of iodine, potassium permanganate and phenol was prepared from the Korean ricechaff. By scanning electron micrographs and IR spectra, it was observed that the organic components in the rice-chaff were decomposed to carbon dioxide and vapor by the pyrolysis and the activation, that activated carbon particles had carbon-carbon structures with a lot of microporosity. The adsorption capacities of iodine, potassium permanganate and phenol were determined. The adsorption isotherm of phenol was well fitted in Freundlich's equation.

• International Journal of Concrete Structures and Materials
• /
• 제8권1호
• /
• pp.27-41
• /
• 2014

The use of carbon fibers (CF) and glass fibers (GF) were combined to strengthen concrete flexural members. In this study, data of tensile tests of 94 hybrid carbon-glass FRP sheets and 47 carbon and GF rovings or sheets were thoroughly investigated in terms of tensile behavior. Based on comparisons between the rule of mixtures and test data, positive hybrid effects were identified for various (GF/CF) ratios. Unlike the rule of mixtures, the hybrid sheets with relatively low (GF/CF) ratios also produced pseudo-ductility. From the calibrated results obtained from experiments, a new analytical model for the stress-strain relationship of hybrid FRP sheets was proposed. Finally, the hybrid effects were verified by structural tests of concrete members strengthened with hybrid FRP sheets and either carbon or glass FRP sheets.

• Journal of Forest and Environmental Science
• /
• 제34권2호
• /
• pp.162-164
• /
• 2018

This study quantified the carbon storage and uptake by street trees in Seoul and explored suitable planting and management strategies. A systematic sampling model was used to select 50 plots to survey the structures of street trees. The average density and cover of street trees were approximately 5.8 trees/$100m^2$ and 12.1%, respectively. Trees with a dbh of less than 30 cm accounted for about 66.3% of the total number of trees surveyed. The total carbon storage and uptake by the street trees were approximately 103,641 t and 10,992 t/yr, respectively. The total carbon uptake equaled the amount of annual carbon emissions from driving of about 11,000 cars. Street tree planting and management strategies were proposed to enhance carbon uptake. They included multi-layered and multi-aged planting, securing ground and space for plant growth, and avoiding excessive tree pruning.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1103-1109
• /
• 2003

Crystalline carbon nitride films have been deposited by RF reactive magnetron sputtering system with negative DC bias. The carbon nitride films deposited on various substrates showed ${\alpha}$- C$_3$N$_4$,${\beta}$-C$_3$N$_4$ and lonsdaleite structures through XRD and FTIR We can find the grain growth of hexagonal structure from SEMI photographs, which is coincident with the theoretical carbon nitride unit cell. When nitrogen gas ratio is 70 % and RF power is 200 W, the growth rate of carbon nitride film on quartz substrate is about 2.1 $\mu\textrm{m}$/hr.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.149-152
• /
• 2005

In order to extend the life time of building and civil infra-structure, nowadays, patch type carbon sheets are widely used as repairing meterials. Repaired concrete columns and beams with carbon sheets gain their stiffness and strength, but they lose toughness and show brittle failure behaviors. Usually, the cracks of concrete structures are visible with naked eyes and the status of the structure in the life cycle is estimated with visible inspection. After repairing of the structure, crack visibility is blocked by repaired carbon sheets. Therefore, structural monitoring after repairing is indispensible and self diagnosis method with optical fiber sensor is very useful. In this paper, peel-out effects is detected with optical fiber sensors and the strain difference between main structure and repaired carbon sheets when they separate each other.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.691-696
• /
• 1997

In recent years, stengthening of beam by steel plate, carbon fiber sheets, and carbon fiber laminate is spotlighted in order to repair and rehabilitation of R/C structures. In this study, 3 method of rehabilitation technic are analyzed from the tests. Test parameters are the width of cracks, the method of repair and rehabilitation, the magnitude of existing load. Deflection, failure load, strains of reinforcing bar, strains of sheet and plates are measured during tests. The failure mode and ultimate load are analyzed from these measured data. Test result shows that the width of cracks and the magnitude of existing load do not make any difference of ultimate flexural capacity.

• 전기화학회지
• /
• 제6권3호
• /
• pp.187-195
• /
• 2003

The present article is concerned with the overview of carbonaceous materials used as anode materials for lithium ion secondary batteries. This article first classified carbonaceous materials into graphite, soft carbon and hard carbon according to their crystal structures, and then summarised the previous works on the characteristics of lithium intercalation/deintercalation into/from the carbonaceous materials. Finally this article reviewed our recent research works on the mechanism of lithium transport through graphite, soft carbon and hard carbon electrodes from the kinetic view point by the analysis of the theoretical and experimental potentiostatic current transients.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1304-1309
• /
• 2004

Synthesis of carbon nanotubes and nanofibers on a catalytic metal substrate, using an ethylene fueled inverse diffusion flame, was investigated. Multi-walled carbon nanotubes, with diameters of 20 - 60nm, were formed on the substrate coated with nickel-nitrate in the region of 5 - 6mm from the flame center along the radial direction. The gas temperature for this region was ranging from about 1400 to 900K. Nickel particles originated from the coated nickel-nitrate on the substrate were the major catalyst for the formation of the nanomaterials. HR-TEM and Raman spectrum revealed that synthesized carbon nanotubes had multi-walled structures with some defective graphite layers at walls.

• 한국정보통신학회논문지
• /
• 제19권12호
• /
• pp.3011-3016
• /
• 2015

단백질의 삼차원 구조를 단백질의 국부적 구조인 단백질 조각의 일차원적 나열로 표현하면, 단백질 구조의 분석, 모델링, 탐색, 예측 등에 효과적으로 응용될 수 있다. 본 논문에서는 자연 상태의 단백질 구조를 정확하게 나타낼 수 있는 단백질 조각 라이브러리를 구성하기 위하여, 대규모 단백질 구조 자료를 이용 할 수 있는 거리 척도들의 효과적인 조합을 조사하였다. 단백질 조각 라이브러리를 구성하기 위해 군집화를 사용하였다. 초기 군집화 단계에서는 가장 계산량이 작은 내부 알파탄소간 거리를 사용하였고, 군집의 확장단계에서는 내부 알파탄소간 거리, 비네-코시거리와 평균 제곱근 오차를 조합하여 사용하였다. 제안한 거리 척도의 조합으로 대규모 자료를 이용하여 단백질 조각 라이브러리를 구성하였다. 구성된 라이브러리를 사용하여 단백질 구조를 나타내는 실험에서 작은 평균 제곱근 오차가 발생함을 확인하였다.