• Applied Biological Chemistry
• /
• v.27
• /
• pp.47-55
• /
• 1984

The results of series studies on the ratio of supplements, out-door composting and out-door fermentation induced by using the rice straw as a main substrates at the cultivation of Agaricus bisporus, and the cultivation of Pleurotus ostreatus using the rice straw bundles on its compost are as follows; When rice straw for cultivation of A. bisporus was used as the main substrates in synthetic compost as a carbon source, yields were remarkably high. Fermentation was more rapid than that of barley straw or wheat straw and the total nitrogen content was high in rice straw compost. Use of barley straw compost for cultivation of A. bisporus was shown of low yield compared with rice straw, but when a 50% barley straw and 50% rice straw mixture was used, the yield was almost the same as that using only rice straw. The total organic nitrogen on the compost were shown the positive relation to the yield of A. bisporus, but the ammonium nitrogen negative relation to the mycelial growth and yield of A. bisporus. When rice straw was used as the main substrate for compost media, urea was the most suitable source of nitrogen. Poor results were obtained with calcium cyanamide and ammonium sulfate. When urea was applied three separate times, nitrogen loss during composting was decreased and the total nitrogen content of compost was increased. The supplementation of organic nutrient activated compost fermentation and increased yield of A. bisporus. The best sources of organic nutrients selected were as follows: perilla meal, sesame meal, wheat bran and poultry manure, etc. Soybean meal, tobacco powder and glutamic acid fermentation byproducts which were industrial wastes, could be substituted for perilla meal, sesame meal and wheat bran as organic nutrient sources for compost media. During out door composing of rice straw for cultivation of A. bisporus, using of tuner, composter and tunnel system increased up to 13% of its yield, and also cut down 34% of production Cost. The cultivation of P. ostreatus and utilizing of rice straw and wheat straw was established and its yield was high on the rice straw pots. When the substrates 'Rice straw' was heated by steam at $60^{\circ}C$ for 6 hr. mycelial growth of P. ostreatus was moderately rapid and its yield was high.

• The Korean Journal of Mycology
• /
• v.14 no.2
• /
• pp.121-130
• /
• 1986

Factors affecting the productivity of cellulolytic enzymes and the mycelial growth of Ganoderma lucidum CAFM 9065 were examined in synthetic media. Among the carbon sources tested, Na-CMC was the best for the production of avicelase CMC ase, and cellobiose for ${\beta}-glucosidase$. Soluble starch and cellobiose were the best for the mycelial growth. The optimum concentration of Na-CMC for the production of the enzymes was 1.0 %, and mycelial growth increased remarkably with the higher concentration of Na-CMC. Glucose inhibited the production of the enzymes, but stimulated the mycelial growth. Among the nitrogen sources used, peptone was the most effective for the production of the enzymes, and the appropriate concentration of peptone was 0.2%. The mycelial growth was stimulated with the increase of the concentration of peptone up to 0.5%. The optimum concentration of $KH_2PO_4$ for the production of the enzymes and mycelial growth was 0.3 and 0.2%, respectively. The optimum concentration of $MgSO_4{\cdot}7H_2O$ for the production of the enzymes and mycelial growth was 0.02%. The production of the enzymes was facilitated by folic acid at a low concentration (0.03 mg/l), and mycelial growth by inositol. The optimum temperature for the production of the enzymes and mycelial growth was $30^{\circ}C$. The optimum pH for the production of avicelase and ${\beta}-glucosidase$ was 5.0 equally and CMCase 5.5. The activities of avicelase and CMCase were the highest at 8 and 10 days of culture, respectively and that of ${\beta}-glucosidase$ at 16 day culture. The growth of mycelium was the highest at 12 days of culture at pH 5.0.

• Journal of Life Science
• /
• v.28 no.5
• /
• pp.577-586
• /
• 2018

We recently reported the potential probiotic properties of Lactobacillus brevis SBB07 isolated from blueberries. The present study investigates the effect of culture conditions such as temperature, initial pH, culture time, and medium constituent for industrial application. The ingredients of the medium to improve cell growth were selected by Plackett-Burman design (PBD) and central composite design (CCD) within a desirable range. The PBD was applied with 19 factors: seven carbon sources, six nitrogen sources, and six microelements. Protease peptone, corn steep powder (CSP), and yeast extract were found to be significant factors for the growth of SBB07. The CCD was then applied with three variables found from the PBD at five levels, and the optimum values were decided for the three variables: protease peptone, CSP, and yeast extract. In the case of the growth of SBB07, the proposed optimal media contained 2.0% protease peptone, 2.5% CSP, and 2.0% yeast extract, and the maximum dried-cell weight was predicted to be 2.93963 g/l. By the model verification, it was confirmed that the predicted and actual results are similar. Finally, the study investigated the effects of incubation temperature and initial pH at the optimized medium. It was confirmed that the dried-cell weight increased from $2.2933{\pm}0.0601g/l$ to $3.85{\pm}0.0265g/l$ when compared to the basal medium at $37^{\circ}C$ and initial pH 8.0. Establishing the optimal culture condition for SBB07 provides good potential for applications in probiotics and can serve as the foundation for the industrialization of materials.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.263-268
• /
• 2002

Bacillus polyfermenticus SCD, which is commonly called a 'Bisroot' strain, has been appropriately used for the treatment of long-term intestinal disorders, since the live strains, in the form of active endospores, can successfully reach the target intestine. Goal of this study was to develop an industrial medium for growth and sporulation of B. polyfermenticus SCD. From the results of effect of mixed carbon sources on growth and sporulation of B. polyfermenticus SCD, glucose 2% and starch 2% was particularly found to be the most effective for the maximum number of spore production, resulting in spore cells of $4.3{\times}10^9\;spores/mL$ with a sporulation yield of 91%. For the effect of nitrogen sources, the maximum spore cells of $5.7{\times}10^9\;spores/mL$ of B. polyfermenticus SCD with a sporulation yield of 97% was obtained when B. polyfermenticus SCD was cultivated in an optimum nitrogen source medium containing 5% soybean flour. A medium involving proper phosphate salt yielded the maximum number of a spore cells of $6.0{\times}10^9\;spores/mL$ with a sporulation yield of 95%. Finally, the efficacy of an industrial medium (KH5 medium) on growth and sporulation of B. polyfermenticus SCD was investigated in jar fermenter. The higher number of viable cells $(3.3{\times}10^{10}\;cells/mL)$ and spore cells $(3.0{\times}10^{10}\;spores/mL)$ were obtained in 5 L fermenter when compared with a 500 mL baffle flask cultivation. Thus, KH5 medium developed in this study shows promise as an industrial medium because of higher cells and sporulation yield.

• Applied Biological Chemistry
• /
• v.22 no.3
• /
• pp.135-141
• /
• 1979

These experiments were conducted to investigate the conditions of the acid protease production by Rhizopus oryzae and the characteristics of crude enzyme. The results obtained were as follows: 1. The optimum culture time and the optimum amount of added water to the wheat bran medium were about 48 hrs and $80{\sim}120%$, respectively. 2. The addition of $(NH_4)_6Mo_7O_{24},\;(NH_4)_2SO_4,\;NH_4NO_3$, casein, and albumin, respectively, as nitrogen sources to the wheat bran medium was effective. Of these, the optimum concentrations of addition of $(NH_4)_6Mo_7O_{24}$ and casein which were the most effective were 0.1% and 1.0%, respectively. 3. The addition of glucose, galactose, maltose, lactose, and soluble starch, respectively, as carbon sources to the wheat bran medium was effective. Of these, the optimum concentration of addition of glucose which was the most effective was 3.0%. 4. The addition of $KH_2PO_4$ as a phosphate salt to the wheat bran medium was effective. The optimum concentration of addition of $KH_2PO_4$ was 0.3%. 5. The optimum pH for the enzyme action was 2.4, the optimum temperature about $40^{\circ}C$, and the stable pH range $2.0{\sim}5.0$. The enzyme was stab1e below $40^{\circ}C$. 6. The enzyme activity increased rapidly for 10 minutes after addition, thereafter it increased slowly. 7. The enzyme activity increased rapidly to 2 ml of addition, but nearly did not increase at the amounts greater than 2ml.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.4
• /
• pp.302-307
• /
• 2014

To examine the trophic ecology of the ascidian Styela clava in an aquaculture system of Korea, stable carbon and nitrogen isotopes were analyzed monthly in S. clava, coarse ($>20{\mu}m$, CPOM) and fine particulate organic matters ($0.7<<20{\mu}m$, FPOM). CPOM (means: $-18.5{\pm}1.2$‰, $9.3{\pm}0.7$‰) were significantly higher ${\delta}^{13}C$ and ${\delta}^{15}N$ values than those ($-20.5{\pm}1.5$‰, $8.4{\pm}0.5$‰) of FPOM. S. clava had mean ${\delta}^{13}C$ and ${\delta}^{15}N$ values of $-18.9({\pm}1.7)$‰ and $11.6({\pm}0.7)$‰, respectively. S. clava were more similar to seasonal variations in ${\delta}^{13}C$ and ${\delta}^{15}N$ values of FPOM than those of CPOM, suggesting that they rely largely on the FPOM as a dietary source. In addition, our results displayed that the relative importance between CPOM and FPOM as dietary source for the ascidians can be changed according to the availability of each component in ambient environment, probably reflecting their feeding plasticity due to non-selective feeding irrespective of particle size. Finally, our results suggest that dynamics of pico- and nano-size plankton (i.e., FPOM) as an available nutritional source to S. clava should be effectively assessed to maintain and manage their sustainable aquaculture production.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.45-59
• /
• 2023

The global focus on mitigating climate change has traditionally centered on carbon dioxide, but recent attention has shifted towards methane as a crucial factor in climate change adaptation. Natural settings, particularly aquatic environments such as wetlands, reservoirs, and lakes, play a significant role as sources of greenhouse gases. The accumulation of organic contaminants on the lake and reservoir beds can lead to the microbial decomposition of sedimentary material, generating greenhouse gases, notably methane, under anaerobic conditions. The escalation of methane emissions in freshwater is attributed to the growing impact of non-point sources, alterations in water bodies for diverse purposes, and the introduction of structures such as river crossings that disrupt natural flow patterns. Furthermore, the effects of climate change, including rising water temperatures and ensuing hydrological and water quality challenges, contribute to an acceleration in methane emissions into the atmosphere. Methane emissions occur through various pathways, with ebullition fluxes-where methane bubbles are formed and released from bed sediments-recognized as a major mechanism. This study employs Biochemical Methane Potential (BMP) tests to analyze and quantify the factors influencing methane gas emissions. Methane production rates are measured under diverse conditions, including temperature, substrate type (glucose), shear velocity, and sediment properties. Additionally, numerical simulations are conducted to analyze the relationship between fluid shear stress on the sand bed and methane ebullition rates. The findings reveal that biochemical factors significantly influence methane production, whereas shear velocity primarily affects methane ebullition. Sediment properties are identified as influential factors impacting both methane production and ebullition. Overall, this study establishes empirical relationships between bubble dynamics, the Weber number, and methane emissions, presenting a formula to estimate methane ebullition flux. Future research, incorporating specific conditions such as water depth, effective shear stress beneath the sediment's tensile strength, and organic matter, is expected to contribute to the development of biogeochemical and hydro-environmental impact assessment methods suitable for in-situ applications.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.79-88
• /
• 2004

Cordyceps pruinosa grows upon dead pupae of Lepidoptera and produces one or $3{\sim}4$ club-shaped stromata per host. The stromata have distinct club-shaped head and long stalk. The length of stromata varies from $1{\sim}3\;cm$. Apical head consists of densely crowded semi-immersed perithecia, which are $360{\sim}400\;{\times}\;180{\sim}200\;{\mu}m$ in size. Asci are $150\;{\mu}m$ in length and $2.8{\sim}3\;{\mu}m$ in diameter. Ascospores, which are $124{\sim}141\;{\mu}m$ in length, have thin thread-like structures in the middle with part-spores attached on both sides. Each ascospore does not separate into part-spores after dispersal, but each part-spore germinates and together develops a colony. The imperfect form produces phialides of $15{\sim}24\;{\times}\;2{\sim}3\;{\mu}m$ size, with spherical or spindle shaped conidia of $4{\sim}6\;{\times}\;1.8{\sim}2.4\;{\mu}m$ size, The anamorph was identified as Mariannaea elegans Samson. YMA and SDAY agar media with pH 7 was produced abundant mycelial growth with high density. Best mycelial growth was observed when dextrin was used as a carbon source. Lactose, saccharose and sucrose also produced high mycelial growth. Peptone, yeast extract and tryptone produced abundant mycelial growth, when used as nitrogen sources. Highest mycelial growth and density was observed when C/N ratio was 1 : 1 at the concentration of 12.5 g/l each. $KH_2PO_4$ was the best mineral source for mycelial growth. Highest mycelial dry wt. was produced in YM and SDAY broths. Optimum inoculum for 100 ml of liquid broth was 6 mycelial discs. Similarly, optimum liquid culture period was 7 days.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.4
• /
• pp.171-179
• /
• 1999

The $CO_2$-rich waters in the Chojeong area are characterized by low pH (5.0~5.8), high $CO_2$pressure (about 1 atm) and high amounts of total dissolved iou (up to 989 mg/L) and chemically belong to Ca-HC $O_3$type. The oxygen. deuterium and tritium isotope data indicate that the mixing process occurred between $CO_2$-rich water and surface water and/or shallow groundwaters and also suggest that the $CO_2$-rich water has been derived from meteoric waters. According to $\delta$$^{13}$ C values (-8.6~-5.3$\textperthousand$). the $CO_2$ in the water is attributed from deep seated $CO_2$gas. The high dissolved carbon (-14.4~-6.8$\textperthousand$. $\delta$$^{13}$ C) in groundwater of the granitic terrain might be affected by $CO_2$-rich water, whereas the dissolved carbon (-17.9~-15.2$\textperthousand$. $\delta$$^{13}$ C) in groundwater of the metamorphic terrain is likely controlled by soil $CO_2$ and from the reaction with calcite in phyllite. Sulfur isotope data (＋3.5~＋11.3$\textperthousand$,$\delta$$^{34}$ $S_{SO4}$) also support the mixing process between $CO_2$-rich water and shallow groundwater. Strontium isotopic ratio ($^{87}$ Sr/$^{86}$ Sr) indicates that the $CO_2$-rich water (0.7138~0.7156) is not related to vein calcite (0.7184) of Buak mine or calcite (0.7281~0.7346) in phyllite. By nitrogen isotope ($\delta$$^{15}$ $N_{NO3}$) the sources of nitrogen (up to 55.0 mg/L, N $O_3$) in the $CO_2$-rich water are identified as fertilizer and animal manure. It also indicates the possibility of denitrification during the circulation of nitrogen in the Chojeong area. The possible evolution model of the $CO_2$-rich water based on the hydrochemical and environmental isotopic data was proposed in this study. The $CO_2$-rich waters from the Chojeong area were primarily derived from the reaction with granite by supply of deep seated $CO_2$. and then the $CO_2$-rich water was mixed and diluted with the local groundwater.ter.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.382-386
• /
• 2011

Microbial fuel cells (MFC), devices that use bacteria as a catalyst to generate electricity, can utilize a variety of organic wastes as electron donors. The current generated may differ depending on the organic matter concentrations used, when other conditions, such as oxidant supply, proton transfer, internal resistance and so on, are not limiting factors. In these studies, a single-cathode type MFC (SCMFC) and dual-cathode type MFC (DCMFC) were used to ascertain the current's improvement through an increase in the contact area between the anode and the cathode compartments, because the cathode reaction is one of the most serious limiting factors in an MFC. Also an MFC was conducted to explore whether an improvement in electricity generation resulted from oxidizing the carbon sources and nitrates. About 250 mg $L^{-1}$ sodium acetate was fed to an anode compartment with a flow rate of 0.326 mL $min^{-1}$ by continuous mode. The current generated from the DCMFC was higher than the value produced from MFC with a single cathode. COD removal of dual-cathode MFC was also higher than that of single-cathode MFC. The nitrate didn't affect current generation at 2 mM, but when 4 and 8 mM nitrate was supplied, the current in the single-cathode and dual-cathode MFC was decreased by 98% from $5.97{\pm}0.13$ to $0.23{\pm}0.03$ mA and $8.40{\pm}0.23$ to $0.20{\pm}0.01$ mA, respectively. These results demonstrate that increasing of contact area of the anode and cathode can raise current generation by an improvement in the cathode reaction.