• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.113-120
• /
• 2005

본 연구의 목적은 기둥의 내진성능을 개선하기 위한 연구로서, 섬유-강판이 복합된 보강재를 사용하여 보강기둥의 내력특성을 연구하였다. 이용 가능한 복합판의 보강량을 선정하고, 기존의 탄소섬유와 강판으로 보강한 기둥과 함께 밴드형 보강실험체를 제작하여 일정축력을 받는 기둥에 반복횡하중을 가하여 하중, 변의 및 연성도를 조사하였다. 내진성능의 척도가 되는 변위연성도, 에너지연성도, 누적소산에너지 및 감쇠비를 비교하여 복합판을 사용한 부재의 내력특성을 평가하였다. 연구결과, 복합판을 사용하여 기둥을 보강할 경우에도 다른 보강방법과 같이 양호한 내진성능을 확보할 수 있었다. 또한, 밴드형식으로 보강한 보강실험체의 연성능력은 모두 양호한 편이나, 최대하중 증가를 위해서는 일정량 이상의 보강량이 필요한 것으로 나타났다. 연성도 평가로는 에너지연성도가 변위연성도에 비하여 보강기둥의 연성능력을 잘 나타내었다.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.8-13
• /
• 2018

The light weight composite materials have been replacing in high performance structures. The object of this study is to examine the effects of the initial crack location about a delamination in a PVC foam cored sandwich composite that is used for the strength improvement of structures. The initial crack location and fiber laminates thickness were changed with several types. The MMB specimen was used for evaluating the fracture toughness and crack behaviors. The material used in the experiment is a commercial twill carbon prepreg in CFRP material and Airex in PVC foam core. Sandwich laminate composites are composed by PVC foam core layer between CFRP face sheets. The face sheets were fabricated as 2 types of 5 and 8 plies. The initial cracks were located in a PVC form core and the interface of upper CFRP sheet. From the results, the crack initiation was affected with the location of the initial crack inserted in the PVC foam core. Among them, the initial crack at 1/3 of the upper part of the PVC foam core was the most rapid progression. And the critical energy release rate was $0.40kJ/m^2$, which is the lowest value when the initial crack was inserted into the interface between a PVC foam core and CFRP laminated with 5 plies. Meanwhile, the highest value of $1.27kJ/m^2$ was obtained when the initial crack was located at the center line in case of the 8 plies.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.845-852
• /
• 2015

본 연구에서는 합리적인 보강설계를 위하여 기존 철근콘크리트 보에 탄소섬유시트 보강시 하중이력에 따른 휨보강 효과를 분석하였다. 실구조물에서는 다양한 하중이력을 겪은 철근콘크리트보에 보강을 하게 되나 보강시기에 따른 구조물과 보강재료의 초기상태가 고려되지 않으므로 구조물의 안전적 측면과 경제적 측면으로 문제점을 발생시킬 수 있는 요인이 된다. 다양한 하중이력을 거친 RC 보의 변형률 상태를 고려하여 탄소섬유시트 보강에 따른 거동변화를 분석하였다. 휨보강후 거동에 영향을 미치는 변수들에 대하여 보강대상 부재의 하중이력의 영향을 고려한 비선형 단면해석결과 탄소섬유 휨보강보의 보강 후 구조적 성능은 하중이력에 따라 달라지는 것으로 나타났다. 탄소섬유 휨보강보의 휨강도는 하중이력에 크게 영향을 받으므로 설계시 반드시 고려하여야 한다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.176-180
• /
• 2002

During the last two decades the laser beam has progressed from a sophisticated laboratory apparatus to an adaptable and viable industrial tool. Especially, in its welding mode, the laser offers high travel speed, low distortion, and narrow fusion and heat-affected zones (HAZ). The principal obstacle to selection of a laser processing method in production is its relatively high equipment cost and the natural unwillingness of production supervision to try something new until it is thoroughly proven. The major objective of this work is focused on the combined features of gas tungsten arc and a low-power cold laser beam. Although high-power laser beams have been combined with the plasma from a gas tungsten arc (GTA) torch for use in welding as early as 1980, recent work at the Ohio State University has employed a low power laser beam to initiate, direct, and concentrate a gas tungsten arcs. In this work, the laser beam from a 7 watts carbon monoxide laser was combined with electrical discharges from a short-pulsed capacitive discharge GTA welding power supply. When the low power CO laser beam passes through a special composition shielding gas, the CO molecules in the gas absorbs the radiation, and ionizes through a process known as non-equilibrium, vibration-vibration pumping. The resulting laser-induced plasma (LIP) was positioned between various configurations of electrodes. The high-voltage impulse applied to the electrodes forced rapid electrical breakdown between the electrodes. Electrical discharges between tungsten electrodes and aluminum sheet specimens followed the ionized path provided by LIP. The result was well focused melted spots.

• 한국물환경학회지
• /
• 제32권1호
• /
• pp.46-51
• /
• 2016

In this study, we synthesized a combination of graphene oxide (GO) and titanium dioxide (TiO₂) and confirm that GO can be used for CO₂ photoreduction. TiO₂ exhibited highly efficient combination with other conventional electric charges generated by these paration phenomenon for suppression of hole-electron recombination. This improved the efficiency of CO₂ photoreduction. The synthetic form of GO-TiO₂ used in this study was agraphene sheet surrounded by TiO₂ powder. Efficiency and stability were enhanced by combination of GO and TiO₂. In a CO₂ photoreduction experiment, the highest CO conversion rate was 0.652 μmol/g·h in GO10-TiO₂ (2.3-fold that of pure TiO₂) and the highest CH₄ production rate was 0.037 μmol/g·h in GO0.1-TiO₂ (2.4-fold that of pure TiO₂). GO enhances photocatalytic efficiency by functioning as a support and absorbent, and enabling charge separation. With increasing GO concentration, the CH₄ level decreases to~45% due to decreased transfer of electrons. In this study, TiO₂ together with GO yielded a different result than the normal doping effect and selective CO₂ photoreduction.

• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.175-184
• /
• 2004

횡방향철근에 의하여 구속된 기존의 철근콘크리트 부재를 섬유에 의하여 보수$\cdot$보강할 경우에 그 부재는 철근과 섬유에 의하여 동시에 구속된다. 이렇게 두 가지 재료에 의하여 복합구속된 콘크리트의 거동은 구속재료의 응력-변형률 곡선 및 구속압에 따라서 달라진다. 이 논문에서는 나선형철근과 섬유에 의하여 동시에 구속된 24개의 실린더 실험을 통하여 복합재료에 의하여 구속된 콘크리트의 거동을 분석하였다. 실험에 의하면 복합재료에 의하여 구속된 콘크리트의 거동은 한 가지 재료만에 의하여 구속된 콘크리트의 거동과 큰 차이를 나타냈다.

• 한국전산구조공학회논문집
• /
• 제17권3호
• /
• pp.261-269
• /
• 2004

콘크리트 보의 내력 증강을 위해, 탄소 섬유시트와 유리 섬유시트 등의 보강재를 보의 하부에 접착시킴으로써, 기존 콘크리트 부재를 보강할 수 있다. 이러한 보강법에 대한 다양한 설계 방법 및 적용 기법들이 개발되고 있지만, 보강 후 접착 성능을 포함한 건전도 평가는 아직 실용화되지 않은 상태이다. 본 연구에서는 콘크리트 보에 부착된 보강재의 박리 여부를 검사하기 위해 전자기파의 모델링 기법을 적용하였고, 이는 박리검사용 실험 장치를 개발하기 위한 토대를 마련하는데 그 목적이 있다. 이를 위해 3GHz와 5GHz의 가우스 파와 사인 파를 입사파로 사용하여, 박리 두께가 각각 1mm와 3mm 인 콘크리트 시편에 전자파를 보내는 경우를 유한차분 시간영역법(FD-TD method)으로 모델링 하였다. 그 결과, 파형과 중심 주파수에 따라 정확도의 차이는 있었으나 박리의 유무와 위치를 찾아 낼 수 있었다.

• Composites Research
• /
• 제27권3호
• /
• pp.103-108
• /
• 2014

섬유강화복합재는 단위중량당 강도와 강성이 뛰어나고, 단위중량이 작으며, 내부식성이 뛰어난 점 등의 다양한 재료성질의 장점이 있는 재료로서 건설분야에 적용이 점차 증가하고 있으며, 섬유강화복합재의 건설분야에 활용한 예로 수상 부유식 태양광발전 구조물이 있다. 수상 부유식 태양광발전 구조물은 최근 저탄소 녹색성장의 대표적인 사례로 각광받고 있으며, 안전성 및 경제성을 확보하기 위한 연구가 다수 진행되었다. 또한 수상 부유식 태양광발전 구조물은 최근 국내에 상용화 단지가 시공되었다. 본 논문에서는 상용화 과정에서 경제성 및 시공성을 위해 개발된 수상 부유식 태양광발전 구조물의 요소기술의 연구 개발 내용을 제시하였다.

• Computers and Concrete
• /
• 제18권6호
• /
• pp.1083-1096
• /
• 2016

Beam-column joints are recognized as the weak points of reinforcement concrete frames. The ductility of reinforced concrete (RC) frames during severe earthquakes can be measured through the dissipation of large energy in beam-column joint. Retrofitting and rehabilitating structures through proper methods, such as carbon fiber reinforced polymer (CFRP), are required to prevent casualties that result from the collapse of earthquake-damaged structures. The main challenge of this issue is identifying the effect of CFRP on the occurrence of failure in the joint of a cross section with normal ductility. The present study evaluates the retrofitting method for a normal ductile beam-column joint using CFRP under monotonic and cyclic loads. Thus, the finite element model of a cross section with normal ductility and made of RC is developed, and CFRP is used to retrofit the joints. This study considers three beam-column joints: one with partial CFRP wrapping, one with full CFRP wrapping, and one with normal ductility. The two cases with partial and full CFRP wrapping in the beam-column joints are used to determine the effect of retrofitting with CFRP wrapping sheets on the behavior of the beam-column joint confined by such sheets. All the models are subjected to monotonic and cyclic loading. The final capacity and hysteretic results of the dynamic analysis are investigated. A comparison of the dissipation energy graphs of the three connections shows significant enhancement in the models with partial and full CFRP wrapping. An analysis of the load-displacement curves indicates that the stiffness of the specimens is enhanced by CFRP sheets. However, the models with both partial and full CFRP wrapping exhibited no considerable improvement in terms of energy dissipation and stiffness.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.196-196
• /
• 2012

Graphene, two-dimensional one-atom-thick planar sheet of carbon atoms densely packed in a honeycomb crystal lattice, has grabbled appreciable attention due to its extraordinary mechanical, thermal, electrical, and optical properties. Based on the graphene's high carrier mobility, high frequency graphene field effect transistors have been developed. Graphene is useful for photonic components as well as for the applications in electronic devices. Graphene's unique optical properties allowed us to develop ultra wide-bandwidth optical modulator, photo-detector, and broadband polarizer. Graphene can support SPP-like surface wave because it is considered as a two-dimensional metal-like systems. The SPPs are associated with the coupling between collective oscillation of free electrons in the metal and electromagnetic waves. The charged free carriers in the graphene contribute to support the surface waves at the graphene-dielectric interface by coupling to the electromagnetic wave. In addition, graphene can control the surface waves because its charge carrier density is tunable by means of a chemical doping method, varying the Fermi level by applying gate bias voltage, and/or applying magnetic field. As an extended application of graphene in photonics, we investigated the characteristics of the graphene-based plasmonic waveguide for optical signal transmission. The graphene strips embedded in a dielectric are served as a high-frequency optical signal guiding medium. The TM polarization wave is transmitted 6 mm-long graphene waveguide with the averaged extinction ratio of 19 dB at the telecom wavelength of $1.31{\mu}m$. 2.5 Gbps data transmission was successfully accomplished with the graphene waveguide. Based on these experimental results, we concluded that the graphene-based plasmonic waveguide can be exploited further for development of next-generation integrated photonic circuits on a chip.