• Carbon letters
• /
• 제14권2호
• /
• pp.126-130
• /
• 2013

In this study, we present a more electrochemically enhanced electrode using activated carbon (AC)-sulfur (S) composite materials, which have high current density. The morphological and micro-structure properties were investigated by transmission electron microscopy. Quantity of sulfur was measured by thermogravimetric analysis analysis. The electrochemical behaviors were investigated by cyclic voltammetry. As a trapping carbon structure, AC could provide a porous structure for containing sulfur. We were able to confirm that the AC-S composite electrode had superior electrochemical activity.

• Carbon letters
• /
• 제9권4호
• /
• pp.316-323
• /
• 2008

The factors that influence ablation resistance in fiber composites are properties of the reinforced fiber and matrix, plugging quantity of fiber, geometrical arrangement, crack, pore size, and their distributions. To examine ablation resistance according to distribution of crack and pore size that exist in carbon/carbon composites, this study produced various sizes of unit cells of preforms. They were densified using high pressure impregnation and carbonization process. Reinforced fiber is PAN based carbon fiber and composites were heat-treated up to $2800^{\circ}C$. The finally acquired density of carbon/carbon composites reached more than $1.932\;g/cm^3$. The ablation test was performed by a solid propellant rocket engine. The erosion rate of samples is below 0.0286 mm/s. In conclusion, in terms of ablation properties, the higher degree of graphitization is, the more fibers that are arranged vertically to the direction of combustion flame are, and the less interface between reinforced fiber bundle and matrix is, the better ablation resistance is shown.

• Bulletin of the Korean Chemical Society
• /
• 제9권1호
• /
• pp.55-59
• /
• 1988

The gaseous carbon dioxide has been irradiated with Co-60 gamma-radiation in the presence and absence of various alcohols, and the radiolysis products analyzed by gas chromatography. Experimental results indicate that no detectable amount of carbon monoxide is formed when pure carbon dioxide is irradiated. By adding small quantities of alcohols to carbon dioxide, however, considerable amount of carbon monoxide, ketones, alcohols and other organic products have been detected. By adding 0.1% of methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-methyl-l-propanol, 2-butanol, and 2-methyl-2-propanol, G(CO) values obtained are 4.4, 4.5, 5.2, 4.4, 5.2, 5.0, 4.7 and 4.1, respectively. These high yields of carbon monoxide suggest that the oxidation reactions of carbon monoxide may be suppressed by scavenging oxygen atom with the alcohols. The main radiolytic decomposition reactions of the alcohols present in small quantity in carbon dioxide may be supposed to be the reactions with the oxygen atom produced by the radiolysis of carbon dioxide. The decomposition reactions seems to follow pseudo-first order kinetics with respect to the alcohols. The decomposition rate measured with 2-propanol is the fastest and that with 2-methyl-2-propanol the slowest. The mechanisms of the radiolytic decomposition reactions of the alcohols present in carbon dioxide are discussed on the basis of the experimental results of the present study.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1333-1339
• /
• 2023

To produce activated carbon fibers, the process is carried out through either physical activation method or chemical activation method. In this study, we present the results regarding the characteristics of activated carbon fibers manufactured under various conditions through the quantitative control of steam. The yield after activation indicates a decreasing trend with the increase in steam quantity and activation time. Additionally, specific surface area characteristics exhibit variations based on activation time and steam flow rate. The SEM analysis results reveal that higher steam flow rates lead to the presence of both mesopores and macropores on the surface of activated carbon fibers (ACF).

• 대한환경공학회지
• /
• 제28권2호
• /
• pp.178-182
• /
• 2006

오존으로 상수처리시 생성되는 소독부산물로써 독성이 강한 브롬산염을 철, 구리, 은 첨착활성탄을 이용하여 제거할 목적으로 회분식과 연속식으로 실험하였다. 활성탄 주입량별 브롬산염 제거 실험에서 각각의 활성탄을 0.1, 0.3, 0.5, 1.0 g씩 주입하여 240분 반응시킨 결과 브롬산염의 제거량은 주입량에 비례하였다. 그리고 산 처리한 활성탄을 사용할 때에는 브롬산염 제거 효율이 약 20%정도 증대되었다. 철, 구리, 은 첨착활성탄은 일반 활성탄보다 약 $30{\sim}50%$ 정도 제거 효율이 좋았으며 특히 철 첨착활성탄은 브롬산염을 약 92%제거하였다. 일반 활성탄을 이용하여 브롬산염을 제거하였을 경우 약 $0.02{\sim}0.45mg\;{BrO_3}^-/g$ AC이였지만 철, 구리, 은 첨착활성탄은 약 $0.9{\sim}1.5mg\;{BrO_3}^-/g$이었다. 연속식 칼럼 반응에서 브롬산염 유입량을 $15.6{\sim}46.8mL/min$으로 변화시켜 EBCT를 1, 2, 3 분으로 실험한 결과 96, 180, 252 시간에서 파과 현상을 보였다.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.49-57
• /
• 2014

Global warming has become a major issue all over the world. Noting the carbon dioxide emissions as a main contributor to global warming, we studied on the methods to reduce the life cycle building carbon emissions. Green Building Certification Criteria(GBCC) has been implemented since 2002 in Korea, but it doesn't estimate the quantities of the $CO_2$ emissions. Therefore, we studied the ways to implement the $CO_2$ emissions in quantity to GBCC. We select a government building which was rated excellent by the GBCC. This office building was regarded to excellent building by GBCC but not good for energy consumption. It was found energy glutton buildings for research by the Ministry of Public Administration and Security in 2010. This part of GBCC is need to be improved.. Also LCA (Life Cycle assessment) was carried out to estimate on carbon footprint on this office building. So we need to implementing quantitative evaluation on the amount of carbon emissions by GBCC. And it is possible to implementing quantitative evaluation on the amount of carbon emissions. Through this study, we expect that quantitative assessment of life cycle carbon emissions of buildings by the GBCC. Also expect to reduce the carbon emissions of the building by improving the GBCC.

• Ocean and Polar Research
• /
• 제44권1호
• /
• pp.99-111
• /
• 2022

Together with the development of measurement techniques, radiocarbon (¹⁴C) has been increasingly used as a key tool to investigate carbon cycling and associated biogeochemistry in the ocean. In this paper, the current status of radiocarbon studies in the East Sea (Japan Sea) is reviewed. Previously, spatiotemporal distribution and change of the water masses in the East Sea from 1979 to 1999 were investigated by using the ¹⁴C in the dissolved inorganic carbon (DIC). Researches on sinking particulate organic carbon (POC) revealed that POC in the deep ocean has more complex and heterogeneous origins than we expected. In particular, since 2011, Korean researchers have been collecting sinking particle samples for more than 10 years, so it is expected that ¹⁴C of POC will provide important information to understand carbon cycling in relation to climate change. Although the quantity of ¹⁴C data published in the East Sea is still limited, the importance and the future direction of using ¹⁴C to understand the biogeochemical mechanisms of carbon cycling and its role as a carbon reservoir in the East Sea are detailed herein.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.151-152
• /
• 2012

Recently, there are growing interests in building LCCO₂ Assessment to reduce carbon emissions. However, existing methods of assessment system include inefficiency in the process of CO₂ calculation requiring considerable data input. Therefore, the purpose of this study is to develop an efficient building assessment system appropriate to material production in construction stage. To that end, quantity input technology was limited to data mapping. Also quantity calculation based on work breakdown structure and item codes consisted of hierarchical structure that is based on facet classification were analyzed. As a result, connectivity links of quantity calculation and CO₂ functional units through item codes for data mapping, and assessment system including calculation and database parts were developed.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.4685-4690
• /
• 2010

E-EGR Valve 고장의 원인이 되는 내부 퇴적물 축적을 최소화하기 위한 새로운 Valve 형상을 제안하고자 한다. 전산유체 해석을 통하여 다양한 형상에 대하여 유속과 유량을 관찰하였으며, 밸브 상부에 라운드를 추가한 Valve 디자인 변형을 통하여 유량손실 없이 Valve 내의 유속을 약 10% 향상시킬 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제14권4호
• /
• pp.305-312
• /
• 2003

A study is presented of the adsorption capacity of a number of different activated carbons for hydrogen at 100 bar aad 298 K. The hydrogen adsorption isotherm was measured by isothermal gravimetric analysis, using a microbalance. The effect of activated carbon's porosity on hydrogen adsorption capacity is surveyed. It is concluded that hydrogen adsorption capacity of activated carbon is lineally increased according to the increase of specific surface area and total pore volume, It seems that microporosity is more contributive than mesoporosity. Most of the adsorbed quantity is due to physical adsorption and chemisorption is negligible, In this work, 0.79 wt.% of hydrogen adsorption capacity is reached.