• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.177-187
• /
• 2021

The effect of nanoparticle volume fraction on the elastic properties of a polymer-based nanocomposite was experimentally investigated and the obtained results were compared with various existing theoretical models. The nanocomposite was consisted of high density polyethylene (HDPE) as polymeric matrix and 0, 0.5, 1 and 1.5 wt.% multi walled carbon nanotubes (MWCNTs) prepared using twin screw extruder and injection molding technique. Nanocomposite samples were molded in injection apparatus according to ASTM-D638 standard. Therefore, in addition to morphological investigations of the samples, tensile tests at ambient temperature were performed on each sample and stress-strain plots, elastic moduli, Poisson's ratios, and strain energies of volume units were extracted from primary strain test results. Tensile test results demonstrated that 1 wt.% nanoparticles presented the best reinforcement behavior in HDPE-MWCNT nanocomposites. Due to the agglomeration of nanoparticles at above 1 wt.%, Young's modulus, yielding stress, fracture stress, and fracture energy were decreased and Poisson's ratio and failure strain were increased.

• 한국세라믹학회지
• /
• 제20권2호
• /
• pp.166-172
• /
• 1983

In this study the sillicon-alloyed isotropic pyrolytic carbon was deposited in the tumbling bed from the pyrolysis of propane and silicon tetrachloride and investigated whether the silicon-alloyed isotropic pyrolytic carbon deposited in this study was usable as bionaterial or not. The silicon-allyed isotropic pyrolytic carbon was varied by controlling the process variables such as propane con-concentration and the argon flow rate flowing in to the silicon tetrachloride bubbler at a fixed reaction bed tempera-ture of 120$0^{\circ}C$ a rotation of reaction tube of 40 rpm a bed particle weight of 7.5 g and a total flow rate of 21/min; the propane concentration was varied from 10 to 70 and the argon flow rate flowing into the silicon tetrachloride bubble from 0 to 1000 cc/min. The results show that the silicon-alloyed isotropic pyrolytic carbon was obtained at all conditions investigated, . And then the alloyed silicon content is rangion from 7 to 14.5 wt%. The density and deposition rate of deposited silicon-alloyed isotropic carbon increased axxording to silicon content and propane concentration. And the apparent crystal-size(Lc) of pyrolytic carbon is not changed with silicon content. The density and apparant crystallite size are respec-tively in the range of 1.94 to 2.06 and 20 to 25$\AA$ It is shown that the silicon-alloyed isotropic pyrolytic carbon ob-tained in this experiment is usable as biomaterial.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 춘계학술대회
• /
• pp.105-108
• /
• 2006

We investigated the fluidic gas-driven carbon-nanotube motor based on multi-wall carbon nanotubes and fluidic gas flow. Since the origination of the torque was the friction between the carbon nanotube surface and the fluidic gases, the density and the flow rate of the working gas or liquid were very important for the carbon nanotube motor. Molecular simulation results showed that multi-wall carbon nanotubes with very low rotating energy barriers could be effectively used for fluidic gas-driven carbon-nanotube motors.

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.139-146
• /
• 2003

본 연구에서는, 오존 처리에 의한 카본블랙의 표면특성을 X-ray photo-electron spectroscopy (XPS)와 접촉각을 통하여 알아보았으며, 카본블랙/acrylonitrile butadiene rubber (NBR) 복합재료의 기계적 물성은 가교밀도와 인열 에너지 ($G_{IIIC}$)를 측정하여 관찰하였다. 본 실험결과, 오존 처리에 의해 카본블랙 표면에 도입된 산소를 함유한 관능기가 카본블랙의 표면자유에너지를 증가시켰으며, 결과적으로 고무 복합재료의 가교밀도와 인열 에너지가 향상되었다. 이러한 결과는 오존처리에 의해 카본블랙 표면에 도입된 산소를 함유한 관능기가 카본블랙과 고무사이의 계면 결합력을 증가시켜 고무 복합재료의 기계적 물성을 향상시킨 것을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제36권10호
• /
• pp.1033-1041
• /
• 2012

본 논문에서는 석탄의 물리적 화학적 구조에 의한 직접탄소 연료전지 내부의 전기화학 반응 특성의 변화에 대하여 연구하였다. 석탄의 구조, 표면적 및 기공체적, 작용기의 분포 등을 분석하기 위하여 다양한 분석 기법(TGA, XRD, BET, XPS)을 사용하였다. 석탄 내부에 존재하는 탄소의 강력한 결정구조는 연료의 비표면적 및 기공크기를 축소시켜 고 전류밀도 영역에서 급격한 포텐셜의 감소를 초래한다. 표면에 분포하는 작용기는 저전류 밀도 영역에서의 전기화학 반응에 영향을 미치며, 제한 전류밀도 및 최대 전력밀도는 전체 탄소의 양과 밀접한 상관관계를 가지고 있다는 것을 확인할 수 있었다. 전해질의 물질전달 향상 및 작동온도에 의한 영향도 논하였다.

• 한국토양비료학회지
• /
• 제45권1호
• /
• pp.30-36
• /
• 2012

The active fraction of soil organic matter, which includes organic debris and light organic fraction, plays a major role in nutrient cycling. In addition, particulate organic matter is a valuable index of labile soil organic matter and can reflect differences in various soil behaviors. Since soil organic matter bound to soil mineral particles has its density lower than soil minerals, we partitioned soil organic matter into debris ($<1.5g\;cm^{-3}$), light fraction ($1.5-2.0g\;cm^{-3}$), and heavy fraction ($>2.0g\;cm^{-3}$), based on high density $ZnCl_{2-}$ sucrose solutions. Generally, partitioned organic bands were clearly separated, demonstrating that the $ZnCl_{2-}$ sucrose solutions are useful for such a density gradient centrifugation. The available gradient ranges from 1.2 to $2.0g\;cm^{-3}$. Although there was not a statistically meaningful difference in organic debris and organomineral fractions among the examined soils, there was a general trend that a higher content of organic debris resulted in a higher proportion of light organomineral fraction. In addition, high clay content was associated with increased fraction of light organomineals. Partitioning of soil organic carbon revealed that carbon content is reduced in the heavy fraction than in the light fraction, reflecting that the light fraction contains more fresh and abundant carbon than the passive resistant fraction. It was also found that carbon contents in the overall organic matter, debris, light fraction, and heavy fractions may differ considerably in response to different farming practices.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.469-474
• /
• 2005

전산화 단층촬영법을 이용하여 탄소/탄소 목삽입재의 밀도 분포를 평가 하였다. 전산화 단층촬영 법의 Beam hardening, 전기적 잡음 및 산란 X-ray의 영상을 토정하고 신호 대 잡음비를 높여 최적화할 때 측정된 제작된 탄소/탄소 복합재료의 밀도는 98.74%의 신뢰도 수준에서 ${\pm}0.01g/cm^3$ 분포를 갖는 것으로 평가 되었다. 전산화 단층촬영 결과의 검증은 탄소/탄소 목삽입재를 절단하며 수침법에 의한 밀도 측정과 주사전자현미경 관찰을 통하여 수행되었으며 단층촬영결과는 수침법에 의한 밀도 분포와 주사전자현미경의 결과와 일치하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.98-100
• /
• 2007

Tropical forests have variety of biodiversity values, which provide invaluable services to the living being on earth. In the recent years, tropical forests are regarded as valuable global resources that act as sink for carbon dioxide in order to mitigate global climatic change. In many parts of the world, tropical forests are being rapidly cleared by various means. Soil organic carbon (SOC) is concentrated in the upper 12 inches of the soil. So it is readily depleted owing to the degradation activities. In the present study, it was aimed to assess the magnitude of disturbance in the availability of SOC in a semi- evergreen forest, situated in the Eastern Ghats of Tamil Nadu, India. The forest density of this region was mapped with QuickBird satellite data. Intensive field soil sampling and floristic study were conducted to estimate the SOC status in different density classes and to identify the species availability. The SOC density ranged from 274.06 t/ha to 147.84 t/ha in the very dense and degraded semi-evergreen forest respectively. The SOC content was also varied from 3.70 to 1.83 % in the very dense semi-evergreen and medium semi-evergreen forests respectively. The species composition in different density classes was also varied considerably. As a result of this study, it was identified that the disturbance to forests by various means not only affect the density of forests but also affect the below ground SOC status proportionately.

• 한국분말재료학회지
• /
• 제4권3호
• /
• pp.170-178
• /
• 1997

An investigation was performed to apply the M3/2 grade high speed steel for metal injection molding using both prealloyed and elementally blended powders. The injected samples were subjected to a debinding step in $H_2/N_2$ gas atmosphere at a ratio that affected the carbon content of the material. The carbon content ranged from 1.4wt.% to 1.43wt%. with increasing $H_2$ content up to 80% $H_2$ in $H_2/N_2$ atmosphere for the prealloyed powders. The carbon contents of the elementally blended powders exhibited 1.44wt.% and 1.62wt.% at 10% $H_2/N_2$ and 20% $H_2/N_2$ gas, respectively. This level decreased to 0.17wt.% upon increasing the $H_2$ content. The sintered density of both powders increased rapidly as the temperature reached the liquid phase forming temperature. After forming the liquid phase, the density rapidly increased to the optimum sintering temperature for the prealloyed powders, whereas the density of mixed elemental powders goes up slowly to the optimum sintering temperature. The optimum sintering temperature and density are 126$0^{\circ}C$ and 97.3% for the prealloyed powders and 128$0^{\circ}C$ and 96.9% for the elementally blended powders, respectively. The microstructure of the specimen at the optimum sintering temperature consisted of fine grains with primary carbides of MC and $M_6C$ type for the prealloyed powders. The elementally blended powders exhibited coarse grains with eutectic carbides of MC, $M_2C$ and $M_6C$ type.

• 한국재료학회지
• /
• 제18권8호
• /
• pp.406-410
• /
• 2008

The properties of pyrolytic carbon (PyC) deposited from $C_2H_2$ and a mixture of $C_2H_2/C_3H_6$ on $ZrO_2$ particles in a fluidized bed reactor were studied by adjusting the deposition temperature, reactant concentration, and the total gas flow rate. The effect of the deposition parameters on the properties of PyC was investigated by analyzing the microstructure and density change. The density could be varied from $1.0\;g/cm^3$ to $2.2\;g/cm^3$ by controlling the deposition parameters. The density decreased and the deposition rate increased as the deposition temperature and reactant concentration increased. The PyC density was largely dependent on the deposition rate irrespective of the type of the reactant gas used.