• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.48-55
• /
• 1994

In this experiment, to find optimum brazing conditions for Cu/Stainless Steel brazing using filler metals of Ag-Cu-Zn-Cd system, first of all spreading ratio was tested on 304 stainless Steel and low carbon steel. And then shear test of brazed joint was executed. As the result of that, the shear strengths of brazed joints were the range of 60-90 MPa. Through microstructure analysis for brazed interface layer, We found as follows. Firstly interface layer increased as time increased. Secondly continuous layer of Ag-Cd compound was observed along the side of stainless steel. Also by means of EDS analysis for fracture surface, ductile fracture was occurred and precipitates on the fracture surface were found to include Cr, Mn, Si in Ag-rich phase.

• 생약학회지
• /
• 제20권3호
• /
• pp.180-187
• /
• 1989

Systematic pharmacological studies on powdered whole part of unossified antler obtained from Cervus nippon Temminck var. mantchuricus have been carried out in mice and rats. Powdered antler, with a single oral administration, showed a very weak acute and subacute toxicity; its MLD being >5g/kg orally in mice. On daily oral treatments of the antler for 14 days, it did not cause any significant differences in body weight gain, various organ weights and serum transaminase activities compared to those of the control rats. Powdered antler, with a single oral administration, showed a remarkable analgesic activity as evaluated by writhing syndrome and tail-pressure test, a weak CNS depressant activity as well as a weak immunopotentiating action as evaluated by carbon clearance test in mice. Powdered antler, with repeated treatments, showed a moderate antifatigue effect against immobilized stress and showed significant increases in both adrenal weight and its ascorbic acid content in rats, suggesting that the mode of antifatigue effect of antler is related to adrenal and its components.

• Journal of Ginseng Research
• /
• 제41권4호
• /
• pp.487-495
• /
• 2017

Background: Although flowers of Panax ginseng Meyer (FPG), Panax quinquefolius L. (FPQ), and Panax notoginseng Burk. (FPN) have been historically used as both medicine and food, each is used differently in practice. Methods: To investigate the connection between components and enhancing immunity activity of FPG, FPQ, and FPN, a method based on a rapid LC coupled with quadrupole time-of-flight MS and immunomodulatory activity study evaluated by a carbon clearance test were combined. Results: According to quantitative results, the ratio of the total content of protopanaxatiol-type ginsenosides to protopanaxadiol-type ginsenosides in FPN was 0, but ranged from 1.10 to 1.32 and from 0.23 to 0.35 in FPG and FPQ, respectively. The ratio of the total content of neutral ginsenosides to the corresponding malonyl-ginsenosides in FPN ($5.52{\pm}1.33%$) was higher than FPG ($3.2{\pm}0.64%$) and FPQ ($2.39{\pm}0.57%$). The colorimetric analysis showed the content of total ginsenosides in FPQ, FPG, and FPN to be $13.75{\pm}0.60%$, $17.45{\pm}0.42%$, and $12.45{\pm}1.77%$, respectively. The carbon clearance assay indicated that the phagocytic activity of FPG and FPQ was higher than that of FPN. A clear discrimination among FPG, FPQ, and FPN was observed in the principal component analysis score plots. Seven compounds were confirmed to contribute strongly by loading plots, which may be the cause of differences in efficacy. Conclusion: This study provides basic information about the chemical and bioactive comparison of FPG, FPQ, and FPN, indicating that protopanaxtriol-type ginsenosides and malonyl-ginsenosides may play a key role in their enhancing immunity properties.

• Journal of Welding and Joining
• /
• 제16권2호
• /
• pp.100-110
• /
• 1998

In this paper, the laser weldability of thin gage steels for automobile application is discussed. Welding was carried out with a high power carbon dioxide laser system, and the laser energy was concentrated through a plano-convex lens. Test results showed that the joint gap in the butt welding proved to be one of the critical conditions for an acceptable weld. In the case where the ratio of the gap clearance to the material thickness was slightly bigger than optimal value, the weld strength was reduced showing weld metal fracture. It was possible to obtained a weld penetration ratio of 0.91 when the vertical offset ratio was controlled to be 0.4 or smaller. Results also demonstrated that the weld strength of the lap joint was influenced by travel speed. At the travel speeds lower than 37 mm/s, the weld strength indicated higher value than that of class A recommendation strength of a resistance spot weld based on the KS code. It was clear that the complicated effect of specimen alignment should be considered so as to make a sound weld with high integrity when the laser process was applied to the long weld line.

• 한국식품과학회지
• /
• 제37권1호
• /
• pp.103-107
• /
• 2005

추출조건에 따른 귀리의 crude ${\beta}$-glucan에 대한 면역증진효과을 살펴보기 위해 추출온도, 에탄올 농도 및 pH를 달리하면서 얻은 ${\beta}$-glucan 분획 중 in vitro 실험에서 항암성이 우수하게 나타난 5개 분획인 A분획 ($55^{\circ}C,\;5%,\;pH\;6$) B분획($45^{\circ}C,\;15%,\;pH\;6$), C분획 ($50^{\circ}C,\;20%,\;pH\;7$), D분획 ($50^{\circ}C,\;0%,\;pH\;7$) 및 E 분획($50^{\circ}C,\;10%,\;pH\;9$)를 대상으로 복강 큰 포식세포의 nitric oxide 생성능과 경구투여 후 혈액중의 carbon 탐식효율을 조사하였다. In vitro 실험에서 ${\beta}$-glucan을 $10{\sim}1,000{\mu}g/mL$ 범위에서 단독으로 또는 $IFN-{\gamma}$와 병행 처리했을 때 모두 대식 세포의 nitric oxide 생성량은 처리 농도에 비례하여 증가하였다. 단독 처리시에는 고용량일 때($1,000{\mu}g/mL$) 모든 분획에서 nitric oxide 생성량이 유의적으로 증가하였다. $IFN-{\gamma}$와 병행 처리시에는 C분획을 제외한 모든 분획의 고농도 처리구에서 유의적으로 증가하였는데, 특히 E분획은 $100{\mu}g/mL$의 낮은 농도에서도 효율적인 증가를 보였다. In vivo 실험에서 100mg/kg의 ${\beta}$-glucan 분획을 7일간 경구투여한 후 carbon 탐식효율을 조사한 결과 B, D 및 E 분획에서 유의적인 효과를 나타내었다. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.

• 한국임상수의학회지
• /
• 제4권2호
• /
• pp.473-481
• /
• 1987

This experiment was performed in order to establish a proper method to determine the half life of indocyanine green(ICG T$\frac{1}{2}$) and its fractional clearance rate(KICG) and investigate the applicability of indocyanine green ( ICG ) excretion test in hepatotoxicity experiment in Korean black goats. The results were as follows : 1. Maximum absorbance of ICG in plasma was at 810 nm in this experiment. 2. The coefficient of correlation between the results obtained by standard method and potassium cyanide method was 0.99 and the regression equation between two methods was y=0.9996 x＋0.0065. 3. As the disappearance curve of ICG plotted in semi-log graph revealed linear pattern at least for 6 minutes after injection, the postinjection blood samples were decided to collect at 2 and 6 minutes after ICG injection. 4. ICG T$\frac{1}{2}$ and KICG values were not affected by dose level of ICG. 5. When 0.25 mg of ICG per kg body weight was administered the normal data of ICG T$\frac{1}{2}$ and KICG in Korean black goa were 1.468${\pm}$0.197 minutes(mean${\pm}$SD) and 0.482${\pm}$0.076/minutes respectively. 6. After administration of carbon tetracholride. the ICG T$\frac{1}{2}$ started to increase acutely from day 1, revealed the peak at day 3, and then returned almostly but not completely to preinjection level at day 14. The ICG T$\frac{1}{2}$ value was suggested to be a sensitive indicator of hepatic injury in Korean black goats.

• 콘크리트학회논문집
• /
• 제18권4호
• /
• pp.527-534
• /
• 2006

본 논문은 외부 비부착 고장력 인장봉을 사용한 새로운 방식의 RC보의 휨보강공법에 관한 논문이다. 제안된 공법의 장점은 기존의 보강방식과 비교하여 빠르고 간단하게 시공할 수 있다는 점이다. 제안된 공법은 기존의 외부 비부착 프리스트레스 텐던공법의 많은 장점을 보유함과 동시에 프리스트레싱 작업시간을 단축시킨 공법이다. 탄소섬유쉬트, 강판 및 고장력 인장봉과 같은 서로 다른 보강재를 사용하여 보강한 철근콘크리트보 실험체를 총 9개 제작하여 실험하였다. 실험 결과, 탄소섬유쉬트로 보강된 RC보는 쉬트의 박리로 인한 취성파괴모드를 나타내었다. 강판보강 시험체의 경우도 기존의 일반적인 앵커와 에폭시로 접합을 할 경우에 강판보강의 효과가 떨어지고 앵커설계를 특별히 하고 시공에 유의하여야 함을 보여주고 있다. 반면에 고장력 인장봉을 사용한 RC보의 경우에는 무보강 RC보와 비교하여 최대내력이 212% 증가하였고, 중앙부 처짐은 65% 감소되었다. 실험 결과는 고장력 인장봉으로 보강된 RC보는 특히 강도와 변형능력에서 기존의 보강방법을 사용한 실험체보다 우수성을 보여주었다.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.95-104
• /
• 2022

Micro hydropower is a readily available renewable energy source that can be harvested utilizing hydrokinetic turbines from shallow water canals, irrigation and industrial channel flows, and run-off river stream flows. These sources generally have low head (<1 m) and low velocity which makes it difficult to harvest energy using conventional turbines. A horizontal-axis screw turbine was designed and numerically tested to extract power from such low-head water sources. The 3-bladed screw-type turbine is placed horizontally perpendicular to the incoming flow, partially submerged in a narrow water channel at no-head condition. The turbine hydraulic performances were studied using Computational Fluid Dynamics models. Turbine design parameters such as the shroud diameter, the hub-to-shroud ratios, and the submerged depths were obtained through a steady-state parametric study. The resulting turbine configuration was then tested by solving the unsteady multiphase free-surface equations mimicking an actual open channel flow scenario. The turbine performance in the shallow channel were studied for various Tip Speed Ratios (TSR). The highest power coefficient was obtained at a TSR of 0.3. The turbine was then scaled-up to test its performance on a real site condition at a head of 0.3 m. The highest power coefficient obtained was 0.18. Several losses were observed in the 3-bladed turbine design and to minimize losses, the number of blades were increased to five. The power coefficient improved by 236% for a 5-bladed screw turbine. The fluid losses were minimized by increasing the blade surface area submerged in water. The turbine performance was increased by 74.4% after dipping the turbine to a bottom wall clearance of 30 cm from 60 cm. The final output of the novel horizontal-axis screw turbine showed a 2.83 kW power output at a power coefficient of 0.63. The turbine is expected to produce 18,744 kWh/year of electricity. The design feasibility test of the turbine showed promising results to harvest energy from small hydropower sources.

• 한국해양공학회지
• /
• 제24권6호
• /
• pp.76-80
• /
• 2010

Oil hydraulic piston pumps are being extensively used around the world, because of their simple design, light weight, effective cost, etc. An oil hydraulic pump is likely to have the serious problems of high leakage, friction, and low energy efficiency after a long period of use. In an oil hydraulic piston pump, the clearance between the valve block and piston plays an important role for volumetric and overall efficiency. In this study, the wear property of the SACM645 material with DLC coating used for a hydraulic piston pump was determined by experimentation with variable heat treatment. To investigate the effect according to the piston surface condition, five different types of specimens were prepared. The maximum tensile strengths of the QT and QT Nitration specimens had similar values of about 800 MPa, but the strains indicated a big difference. In a wear test, the wear characteristic of the DLC coating specimen was shown to be excellent. The QT, QT + IH, QT + Nitration, and matirx specimen showed similar wear characteristics. In the case of a dry condition without oil, the DLC coating specimen had good wear resistance, with no wear shown.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.172-179
• /
• 1998

Valve lifter namely tappet is supported by lifter hole which is located upper side of camshaft in cylinder block transforms rotatic mvement of camshaft into linear movement and helps to open and shut the en-gine valve as an engine parts. The face of valve lifter which is continuously contacting with camshaft brings about abnormal wears such as unfair wear and early wear because it is severely loaded in the valve train system. These wears act as a defect like over-clearance and cause imperfect combustion of fuel during the valve lifting in the combustion chamber. Consequently this imperfect combustion makes the engine out-put decrease and has cause on air pollution. To prevent these wears therefore The valve lifter cast in me-tal developed into SiC ceramics valve lifter which has an excellence in wear and impact resistance As a results the optimum process conditions like injection condition mixture ratio and debonding process could be established. After sintering fine-sinered dual microstructure in which prior ${\alpha}$-SiC matches well with new SiC(${\beta}$-SiC) produced by reaction among the ${\alpha}$-SiC carbon and silicon was obtained. Based on the study it is verified that mechanical properties of SiC valve lifter are excellent in Vickers hardness 1100-1200 bending strength (300-350 Pa) fracture toughness(1.5-1.7 Mpa$.$m1/2) Through engine dynamo test-ing SiC valve lifter and metal valve lifter are examined and compared into abnormal phenomena such as early fracture unfair and early wear. It is hoped that this research will serve as an important springboard for the future study of heavy duty diesel engine parts developed by ceramics which has a good wear resis-tance relaibility and lightability.