• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.553-556
• /
• 2000

Possibility of biological nitrogen treatment was tested in wastewaters with low C/N ratio. Chlorella kessleri was inoculated at $10^6\;cell/mL$ of initial density in two different artificial wastewaters: one that contained glucose for organic carbon source and the other without carbon source. Nitrate could be successfully reduced below 10 mg $NO_3/mL$ from initial nitrate concentration of 560 mg $NO_3/mL$ in 10 days even in the wastewater without carbon source, This 98% removal of nitrate without extra organic carbon source lights up the future of biological wastewater treatment, where the insufficient ability of nitrogen removal is a major problem.

• Journal of Ecology and Environment
• /
• 제42권1호
• /
• pp.1-11
• /
• 2018

Background: In the study, the effects of elevated $CO_2$ and temperature on the nitrogen content, carbon content, and C:N ratio of seven rare and endangered species (Quercus gilva, Hibiscus hambo, Paliurus ramosissimus, Cicuta virosa, Bupleurum latissimum, Viola raddeana, and Iris dichotoma) were examined under control (ambient $CO_2$ + ambient temperature) and treatment (elevated $CO_2$ + elevated temperature) for 3 years (May 2008 and June 2011). Results: Elevated $CO_2$ concentration and temperature result in a decline in leaf nitrogen content for three woody species in May 2009 and June 2011, while four herb species showed different responses to each other. The nitrogen content of B. latissimum and I. dichotoma decreased under treatment in either 2009 and 2011. The leaf nitrogen content of C. virosa and V. raddeana was not significantly affected by elevated $CO_2$ and temperature in 2009, but that of C. virosa increased and that V. raddeana decreased under the treatment in 2011. In 2009, it was found that there was no difference in carbon content in the leaves of the six species except for that of P. ramosissimus. On the other hand, while there was no difference in carbon content in the leaves of Q. gilva in the control and treatment in 2011, carbon content in the leaves of the remaining six species increased due to the rise of $CO_2$ concentration and temperature. The C:N ratio in the leaf of C. virosa grown in the treatment was lower in both 2009 and 2011 than that in the control. The C:N ratio in the leaf of V. raddeana decreased by 16.4% from the previous year, but increased by 28.9% in 2011. For the other five species, C:N ratios increased both in 2009 and 2011. In 2009 and 2011, chlorophyll contents in the leaves of Q. gilva and H. hamabo were higher in the treatment than those in the control. In the case of P. ramosissimus, the ratio was higher in the treatment than that in the control in 2009, but in 2011, the result was the opposite. Among four herb species, the chlorophyll contents in the leaves of C. virosa, V. raddeana, and I. dichotoma did not show any difference between gradients in 2009, but decreased due to the rise of $CO_2$ concentration and temperature in 2011. Leaf nitrogen and carbon contents, C:N ratio, and chlorophyll contents in the leaves of seven rare and endangered species of plant were found to be influenced by the rise and duration of $CO_2$ concentration and temperature, species, and interaction among those factors. Conclusions: The findings above seem to show that long-term rise of $CO_2$ concentration, and temperature causes changes in physiological responses of rare and endangered species of plant and the responses may be species-specific. In particular, woody species seem to be more sensitive to the rise of $CO_2$ concentration and temperature than herb species.

• 자원환경지질
• /
• 제55권5호
• /
• pp.439-445
• /
• 2022

하천퇴적물에 포함된 유기 오염물질의 기원은 다양하지만 주로 자연 기원의 산토양과 인위적 기원인 우분으로 구분할 수 있다. 영주댐 유역 토일천의 하천퇴적물에 포함된 유기오염물질의 기여도를 평가하기 위하여 산토양과 우분 및 하천퇴적물의 질소와 탄소 동위원소 분석을 수행하였다. 탄소동위원소비(δ¹³C) 평균값은 하천퇴적물 -25.17‰, 우분 -22.34‰, 산토양 -26.39‰으로 하천퇴적물은 산토양의 영향을 조금 더 받은 것으로 판단된다. 질소동위원소비(δ¹⁵N) 평균값은(‰)는 하천퇴적물 9.46‰, 산토양 1.99‰, 우분 19.53‰이다. 질소동위원소 분석결과에 의하면 토일천 하천 퇴적물은 자연기원의 산토양보다 인위적 기원인 우분의 기여도가 약간 더 높은 것으로 추정된다.

• Journal of Ecology and Environment
• /
• 제40권1호
• /
• pp.5-11
• /
• 2016

Background: As the decomposition of lignocellulosic compounds is a rate-limiting stage in the nutrient mineralization from organic matters, elucidation of the changes in soil enzyme activity can provide insight into the nutrient dynamics and ecosystem functioning. The current study aimed to assess the effect of thinning intensities on soil conditions. Un-thinned control, 20 % thinning, and 30 % thinning treatments were applied to a Larix kaempferi forest, and total carbon and nitrogen, total carbon to total nitrogen ratio, extractable nutrients (inorganic nitrogen, phosphorus, calcium, magnesium, potassium), and enzyme activities (acid phosphatase, ${\beta}$-glucosidase, ${\beta}$-xylosidase, ${\beta}$-glucosaminidase) were investigated. Results: Total carbon and nitrogen concentrations were significantly increased in the 30 % thinning treatment, whereas both the 20 and 30 % thinning treatments did not change total carbon to total nitrogen ratio. Inorganic nitrogen and extractable calcium and magnesium concentrations were significantly increased in the 20 % thinning treatment; however, no significant changes were found for extractable phosphorus and potassium concentrations either in the 20 or the 30 % thinning treatment. However, the applied thinning intensities had no significant influences on acid phosphatase, ${\beta}$-glucosidase, ${\beta}$-xylosidase, and ${\beta}$-glucosaminidase activities. Conclusions: These results indicated that thinning can elevate soil organic matter quantity and nutrient availability, and different thinning intensities may affect extractable soil nutrients inconsistently. The results also demonstrated that such inconsistent patterns in extractable nutrient concentrations after thinning might not be fully explained by the shifts in the enzyme-mediated nutrient mineralization.

• ALGAE
• /
• 제32권4호
• /
• pp.349-357
• /
• 2017

Korean mariculture Undaria pinnatifida was collected during the months of January, February, March, and December of 2010, as well as from January of 2011 to investigate the changes in the carbon and nitrogen stable isotope ratios (${\delta}^{13}C$ and ${\delta}^{15}N$) and heavy metal with respect to it growth and to identify the factors that influence such changes. The blades of U. pinnatifida showed ${\delta}^{13}C$ and ${\delta}^{15}N$ in the range (mean) of -13.11 to -19.42‰ (-16.93‰) and 2.99 to 7.57‰ (4.71‰), respectively. Among samples with the same grow-out period, those that weighed more tended to have higher ${\delta}^{13}C$ suggesting a close association between the carbon isotope ratio and growth rate of U. pinnatifida. Indeed, we found a very high positive linear correlation between the monthly average ${\delta}^{13}C$ and the absolute growth rate in weight ($r^2=0.89$). Nitrogen isotope ratio tended to be relatively lower when nitrogen content in the blade was higher, probably due to the strengthening of isotope fractionation stemming from plenty of nitrogen in the surrounding environment. In fact, a negative linear correlation was observed with the nitrate concentration in the nearby seawaters ($r^2=0.83$). Concentrations of Cu, Cd, Pb, Cr, Hg, and Fe in the blades showed a rapid decrease in their concentration per unit weight in the more mature U. pinnatifida. Specifically, compared to adult samples, Cu, Hg, and Pb were concentrated by 30, 55, and 73 folds, respectively, in the young blades. Therefore, U. pinnatifida tissue ${\delta}^{13}C$ is as an indirect indicator of its growth rate, while ${\delta}^{15}N$ values and heavy metal concentrations serve as tracers that reflect the environmental characteristics.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.156-156
• /
• 2016

The effect of nitrogen doping on the mechanical and tribological performance of single-layer tetrahedral amorphous carbon (ta-C:N) coatings of up to $1{\mu}m$ in thickness was investigated using a custom-made filtered cathode vacuum arc (FCVA). The results obtained revealed that the hardness of the coatings decreased from $65{\pm}4.8GPa$ to $25{\pm}2.4GPa$ with increasing nitrogen gas ratio, which indicates that nitrogen doping occurs through substitution in the $sp^2$ phase. Subsequent AES analysis showed that the N/C ratio in the ta-C:N thick-film coatings ranged from 0.03 to 0.29 and increased with the nitrogen flow rate. Variation in the G-peak positions and I(D)/I(G) ratio exhibit a similar trend. It is concluded from these results that micron-thick ta-C:N films have the potential to be used in a wide range of functional coating applications in electronics. To achieve highly conductive and wear-resistant coatings in system components, the friction and wear performances of the coating were investigated. The tribological behavior of the coating was investigated by sliding an SUJ2 ball over the coating in a ball-on-disk tribo-meter. The experimental results revealed that doping using a high nitrogen gas flow rate improved the wear resistance of the coating, while a low flow rate of 0-10 sccm increased the coefficient of friction (CoF) and wear rate through the generation of hematite (${\alpha}-Fe_2O_3$) phases by tribo-chemical reaction. However, the CoF and wear rate dramatically decreased when the nitrogen flow rate was increased to 30-40 sccm, due to the nitrogen inducing phase transformation that produced a graphite-like structure in the coating. The widths of the wear track and wear scar were also observed to decrease with increasing nitrogen flow rate. Moreover, the G-peaks of the wear scar around the SUJ2 ball on the worn surface increased with increasing nitrogen doping.

• Journal of Microbiology and Biotechnology
• /
• 제1권2호
• /
• pp.121-125
• /
• 1991

The culture conditions and nutritional requirements for enhanced mycelial growth of the ectomycorrhizal fungus P. tinctorius SMF were determined in flask scale experiments. Optimum culture conditions for growth of P. tinctorius SMF in a further modified Melin-Norkrans broth were as follows; temperature 25~$27^{\circ}C$, agitation 120 rpm, and pH 4.0. P. tinctorius SMF utilized various carbon sources including monosaccharides, disaccharides, and polysaccharides. D-Glucose and mannitol were respectively the first and second most suitable carbon sources for mycelial growth. With D-Glucose as the principal carbon source, supplementation of modified Melin-Norkrans (MMN) broth with Lysine (800 mg/l), Glutamic Acid (500 mg/l), or Proline (50 mg/l) enhanced mycelial yields 63%, 34%, and 22% respectively as compared to growth in medium lacking amino acids. ThiaminㆍHCl＋biotin＋pyridoxine supplementation also enhanced growth. As compared to mycelial growth in the MMN medium, growth of P. tinctorius SMF was enhanced 120% in MMN broth when the carbon/nitrogen ratio was 25/1 in citrate buffer at pH 4.5, and growth was 50% greater in MMN broth of carbon/nitrogen ratio with a 10/1~20/1 without using the buffer. Standard conditions established for growth of P. tinctorius SMF in MMN broth were 25~$27^{\circ}C$, agitation 120 rpm, buffered to pH 4.0 with citrate, in MMN medium containing 10 g/l D-glucose supplemented with 800 mg/l lysine. In this medium the carbon/nitrogen ratio was 20/1~25/1, and the maximal mycelial yield ($Y_{x/s}$ ) was 0.472 (4.72 mg/ml) after 7 days of incubation, as compared to 0.214 (2.14 mg/ml), when the fungus was grown in standard MMN broth.

• 한국환경과학회지
• /
• 제13권9호
• /
• pp.779-878
• /
• 2004

This study was conducted to analyze the operating conditions of predenitrification process to improve the treatment efficiency in low organic loading sewage plant in use today, and to investigate the treatment efficiency of pilot plant added night soil as well as the nitrogen removal characteristics of pilot plant added carbon sources. In the operation under the condition of $BOD_{5}$ sludge load 0.03-0.28kg $BOD_{5}$/kg VSS/d and oxic ammoniac nitrogen sludge load 0.02-0.24 $kgNH_{4}^{+}$-N/kg MLVSS/d, nitrification efficiency is higher than 95%. In order to achieve 70% nitrogen removal at the T-N sludge loading 0.06kg T-N/kg VSSㆍd and the SRT 6～11 days, optimum operating factors were revealed to $CODc_{r}$/T-N ratio 9, recycle ratio 2.6, and denitrification volume ratio 0.33. At this time, denitrification capacity was approximately 0.09 kg $NO_{3}^{-}$-N/kg $CODc_{r}$; specific nitrification rate was 3.4mg $NH_{4}^{+}$-N/g MLVSS/hr; and specific denitrification rate was 4.8mg $NO_{3}^{-}$-N/g MLVSS/hr.

• 한국진공학회지
• /
• 제8권2호
• /
• pp.165-171
• /
• 1999

Diamond-like carbon(DLC) films were synthesized using the rf-plasma CVD technique with the addition of small amounts of nitrogen and oxygen to a gas mixture of $CH_4$ and $H_2$. The gas flow ratio of $CH_4$ to $H_2$ was 2.4:1, and 3% , 13.6% of nitrogen were added to the gas mixture of $CH_4$ and $H_2$ for the deposition of DLC films. The film stress tended to decrease as the nitrogen concentration increased from 3% to 13.6%, probably due to the decrease of the number of the interlink between carbon atoms. The residual stress tended to slightly decrease when 3% of oxygen was added. Scratch tests were performed to investigate the adhesion between the DLC films and the Ti intelayer after pretreating the TiN surface with direct hydrogen plasma. The adhesion was enhanced by adding nitrogen and oxygen to the $CH_4$ and $H_2$ gas mixture. The adhesion for the 3% nitrogen addition was better than that for the 13.6% nitrogen addition. The Vicker's hardness of the DLC films was measured to be 1100Hv.

• 열처리공학회지
• /
• 제28권1호
• /
• pp.1-6
• /
• 2015

The ductile-to-brittle transition behavior of two austenitic Fe-18Cr-10Mn alloys with the combined addition of nitrogen and carbon was investigated in this study. The alloys exhibited a ductile-to-brittle transition behavior because of unusual brittle fracture at low temperatures unlike conventional austenitic alloys. The alloy with higher carbon content had higher yield and tensile strengths than that with lower carbon content due to the solid solution strengthening effect resulting from carbon addition. However, the increase in carbon content promoted the occurrence of intergranular fracture, and thus deteriorated the impact toughness. In order to develop successfully the austenitic Fe-18Cr-10Mn alloys with the excellent combination of strength and toughness in the future, therefore, more systematic studies are required to find the appropriate amount and ratio of nitrogen and carbon.