• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.9
• /
• pp.903-909
• /
• 2007

A fatigue capsule is one of the special capsules to investigate the fatigue characteristics of the nuclear materials during an irradiation test in a research reactor, HANARO. In this study, the performance test and the preliminary fatigue test results by using a cyclic load device newly developed for a fatigue capsule are described. In order to obtain the characteristics such as a realization and a controllability of the periodic wave shape and the relationship between the pressure and the load, a spring and rigid bar specimens are used. The fatigue test for the 316L stainless steel specimen with 1.8mm in diameter and 12.5mm in gage length is also performed under the same conditions as the temperature($550^{\circ}C$) of the specimen during irradiation tests. As a result of the test, the fracture of the specimen occurs at a total of 70,120 cycles(about 12 days), and the displacement in this case is 2.02 mm. It is expected that these results will be used for determining test conditions and a comparison of the in-pile fatigue test results.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.560-565
• /
• 2008

Plantae of the natural material has been broadly used on cloth dyeing by it's specific properties such as eco-friendly and innoxious. However dyeing with natural material on synthetic fiber is nearly impossible due to poor affinity between natural material and synthetic fiber. The method which is binding with micro-capsulized natural material to cloth, used in this study, has low change on quality by external influence. Also this method has high ability in spray effect by broken capsule which comes to pressure and friction when the treated cloth was dressed. And this method is applicable widely from natural fiber to synthetic fiber. The purpose of this study is to develop the multi-functional synthetic material with micro-capsulized Ginseng on PET. Moreover, it was driven by comparison of colormetric properties and fastness between regular dip-dyeing method and binding with micro-capsulized material method. Dyeability showed a little bit low exhaustion but the PET treated by micro-capsule was more or less better than the dip dyed PET. Through the SEM(Scanning Electron Microscope) of PET treated by micro-capsule, it has good residence of capsules even after 5 or 10 times washing. Wash and light fastness were revealed some different grades by each condition but showed high level, in most and the micro-capsulized PET was more improver than regular dip dyed PET.

• The Korean Journal of Malacology
• /
• v.2 no.1
• /
• pp.10-12
• /
• 1986

Pettancylus nipponicus (freshwater limpet) collected from the Lake Choon Cheon were cultrued in aquarium and studied in the respects of an egg deposition and the developmental characters of cleavage. The species were collected only in the Lake Uiam and Choon Cheon and easily sampled on the debris like vinyls and cans. Those smooth surfaces were suitalble substrata for attaching. P. nipponicus, about 4 mm in adult, deposited an egg in one calcareous egg-capsule on the aquarium walls, while many eggs are surrounded in a jelly-like egg-envelope in the most gastropods. And another special features was that an egg-capsule was consisted of two valves and the suture was opended as hatching. A diameter of its egg was $55{{\mu}m}$ and the length of an egg capsule was $620{{\mu}m}$ and $510{{\mu}m}$ in long and short diameter, respectively. It took about 8 hours from beginning cleavage to 16-cell stage and about one year to become an adult.

• Clinics in Shoulder and Elbow
• /
• v.4 no.1
• /
• pp.1-12
• /
• 2001

Purpose: To evaluate the histologic effect(LM and EM findings)of nonablative LASER and thermal energy on knee joint capsule of rabbit. Material and Methods: The nonablative LASER and thermal energy was applied to the rabits(average age 36 weeks, weight 5 ㎏). There were divided into 4 groups with 6 rabbits in each. The group I received 6 watts of LASER, group Ⅱ 12 watts of LASER, group Ⅲ 60° of thermal energy, and group Ⅳ 70° of thermal energy. The histologic study included H-E, Massons trichrome stain and electron microscopy at immediate, 3 weeks and 6 weeks after operation. Results: The histologic finding in immediate after operation was shown a fibrous degeneration of collagen on all groups and related to the energy level. The histologic finding after 3 weeks showed fibrosis and this fibrosis related the level of energy. Especially the group IV was shown flattening of capsule and deep fibrosis. The histologic finding after 6 weeks was shown marked recovery of collagen arrangement and capillary proliferation in group Ⅰ,Ⅱ and Ⅲ. But in the group Ⅳ not recovered. Conclusion: The nonablative LASER or thermal energy can cause degeneration, fibrosis and contracture of joint capsular collagen.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.113-121
• /
• 2010

Since e-Book has various advantages of hyper-link, multimedia function, dual-direction, etc, users can access to the system easily by touch method. XML has been established as the document standard of e-Book. For XML has hyperlink, style function, and structure it is suitable for knowledge delivery and expression. In this paper, we developed the Seoul's 1000 years time-capsule cultural contents into e-Book forms that can guide tourists. We also implemented the time capsule guidance system based on the e-Book of the user center through the modification process of the generated XML code using the e-Book solution.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.1
• /
• pp.49-54
• /
• 1992

This study was carried out for the purpose of developing an effective temazepam soft elastic gelatin capsule (softgel) which exhibits an excellent bioavailability and of comparing the rate and extent of absorption of temazepam from the marked elixir and prepared softgel using hydrophilic liquid such as polyethylene glycol 400 as a suspending agent by rotary die method. Both softgel and elixir containing 3 mg of temazepam were given to 7 healthy male New Zealand White rabbits in a single oral dose cross-over study. Plasma temazepam concentrations were measured by HPLC. The mean peak concentrations of temazepam following a single oral dosing as softgel and elixir dosage form were 13.84 and 13.25 ng/ml, respectively. And the mean time to peak concentration was 1.29 hr for the softgel and 1.07 hr for the elixir. There was no significant difference in the extent of drug absorption (AUC) for the two different dosage froms (p>0.05). While the softgel exhibited mean lag time of 0.63 hr, the elixir did not show any lag time. Statistical moment parameters such as the mean residence time and variance of the mean residence time did not differ significantly for the two formulations.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.1045-1050
• /
• 2008

Developing of high technology, productivity of the fiber product has being rapidly increased and also various kinds of advanced treatment process lead consumer's needs to more high functional, clean and healthy goods. Moreover, increasing in the concern of eco-friendly material and processing, it has been getting popular that the dyeing method like as using natural dyes is more eco-friendly and natural-friendly treatment process. The method, used in this study, adhesion by binding with micro-capsulized natural material to fabric has low change in quality by external influence and high ability in spray effect by broken capsule which comes to pressure and friction when it dressed. Also it has wide application from natural fiber to synthetic fiber. The purpose of this study is development of multi-functional synthetic material with micro-capsulized Scutellaria baicalensis on PET. Moreover, it was driven by comparison of colormetric properties and fastness between regular dip-dyeing method and binding with micro-capsulized material method. Dye ability was arranged mostly low exhaustion but the PET treated by micro-capsule was more or less better than the dip-dyeing PET. Through the SEM(Scanning Electron Microscope) of PET treated by micro-capsule, it has good residence of capsules even after 5 or 10 times washing. Wash and light fastness was arranged some different grade by each condition but mostly high achievement and the micro-capsulized PET was more improved than regular dip-dyed PET.

• Journal of Veterinary Clinics
• /
• v.22 no.2
• /
• pp.163-165
• /
• 2005

An 18-month-old, female American Cocker Spaniel was presented with a cataract of left eye. The left eye was blind, and anterior uveitis was noted on ocular examination. Ultrasonography of the eye revealed a hyperechoic mass with distinct borders in the vitreous indicative of lens fiber or mass lesion extending from ciliary body. The eye was enucleated after ultrasonographic examination. On gross examination, rupture of posterior capsule was noted adjacent to the ciliary body.

• Journal of Welding and Joining
• /
• v.25 no.5
• /
• pp.64-71
• /
• 2007

The aim of this paper is to investigate the effects of welding parameters on the weld shape in seal-welding of STS304L capsule for manufacturing a radioisotope source which is widely used in nondestructive testing of metal structures using gamma ray. Pulsed gas tungsten arc (Pulsed GTA) welding is performed for thin cross sectional area of the capsule. Seven welding parameters including current waveform parameters and arc length etc. are selected as main process parameters using design of experiment. The weld shape such as bead width, penetration depth, weld area, aspect ratio and area rate is investigated to assess the effects of welding parameters. As results, the combination of pulse duty/welding speed largely affects on bead width, penetration depth, area and aspect ratio. Finally, it is concluded that the key parameters are the combination of pulse duty/welding speed, base current and arc length, and their optimal conditions are 50%/1.77mm/s, 6.4A and 1 mm.

• Elastomers and Composites
• /
• v.51 no.1
• /
• pp.24-30
• /
• 2016

Sole in the footwear usually modified with foaming agent on the polymer resin to improve the lightweightness and crush-cushion effect. In this study, we investigated rheological properties for polymer resin filled with the different type and concentration of foaming agent, capsule type foaming agent and organo-chemical foaming agent, under the time sweep test. Curing times of each polymer resin with different kind of foaming agent are delayed than reference material (epoxy resin with curing agent). In case of adding capsule type foaming agent, however, there is appropriate concentration to reduce the curing time, relatively. When foaming agent is activated, foaming force inflates the sample in contrast to condensation force of curing and then axial normal force develop to the (+) direction. Interestingly, by increase concentration of foaming agent, there is a specific point to break down the axial normal force development. The reason for this phenomenon is that coalescence of foams induce the blocking of axial normal force development.