• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.169-173
• /
• 2004

본 논문은 전력계통의 전압 안정도 제약 문제를 해결하는데 고온 초전도 케이블을 적용하기 위한 기법을 제시하였다. 대전력계통의 유효 송전용량은 종종 전압 안정도 제약에 의해 결정된다. 기존의 초전도 케이블 응용 연구는 주로 도심지역의 고밀도 전력 수송 문제를 해결하는 대안으로 연구의 초점을 두어왔지만, 고온 초전도 케이블의 선로정수 개선효과를 이용하면 전압 안정도로 제약된 계통의 송전용량을 증가시킬 수 있어 그 응용 범위가 확대될 수 있다. 전압 안정도에 의한 최대 수송전력을 결정하는 데는 IPLAN에 의한 P-V곡선을 이용하였고, 대체 대상선로는 부하 증가시 무효전력 손실감도가 가장 큰 선로로 하였다. 결과의 타당성을 검증하기 위해 IEEE 14모선 계통을 사용하였으며, 적용결과 Case II는 70[%], Case III에서는 160[%]의 추가 수송 능력 증가를 가져올 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.590-596
• /
• 2010

Maglev vehicles levitated and propelled by electromagnet as non-contact between vehicle and guide rail is environmentally friendly transport system which have many advantages like ride comfort and guide way construction costs. As a goal of commercial operation at Incheon International Airport in 2012, development of vehicle is underway and proto-vehicle is test running at KIMM. The maglev bogie system of proto-vehicle, like railway vehicle, has functions to support weight of vehicle, transfer force of brake and propulsion and improve ride comfort through insulation of vibration and improve curve negotiation capability. The main components of a bogie are two modules consisted of electromagnetic, frame and linear motor, two tie beams to connect two modules and steering system to improve curve negotiation capability. The purpose of this paper is to describe general specification, structure, manufacturing process, performance testing, ride comfort of proto-vehicle and bogie system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.575-576
• /
• 2015

It is important to coordinate generator protection with generator control to operate generator safely and effectively. This paper discusses specific calculation methods that can be used to obtain Generator Capability Curve (GCC). It also provides GCC for example generator using ElectroMagnetic Transients Program-Restructured Version (EMTP-RV).

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.175-182
• /
• 2008

지진에 대한 구조물의 위험도를 해석하는 경우, 여러 위험 단계에 대한 구조물의 취약도를 확인할 필요가 있다. 그리고, 교량과 같은 구조물은 지진에 저항하는 능력을 가져야하므로, 지진 격리장치가 있는 경우와 없는 경우에 대해 지진에 대한 손상 해석을 할 필요가 있다. 본 논문에서는 지진의 영향으로 최대지반가속도(PGA), 최대지반속도(PGV), 스펙트럼가속도(SA), 스펙트럼속도(SV), 스펙트럼강도(SI) 등의 특성을 고려하여, 내진 능력을 확보하기 위하여 납면진 받침을 갖는 교량의 손상도 곡선을 구하고, 탄성계수의 변화에 따른 이들 손상도 곡선의 안정성을 평가하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.145-152
• /
• 2009

지진에 대한 구조물의 위험도를 해석하는 경우, 여러 위험 단계에 대한 구조물의 취약도 또는 손상도를 확인할 필요가 있다. 그리고, 교량과 같은 구조물은 지진에 저항하는 능력을 가져야하므로, 지진 격리장치가 있는 경우와 없는 경우에 대해 지진에 대한 손상 해석을 할 필요가 있다. 본 논문에서는 지진의 영향으로 최대지반가속도(PGA), 최대지반속도(PGV), 스펙트럼가속도(SA), 스펙트럼속도(SV), 스펙트럼강도(SI) 등의 특성을 고려하여, 납면진 받침을 갖는 교량의 손상도 곡선을 구하고, 입력 지진의 변화에 따른 이들 손상도 곡선의 안정성을 평가하였다.

• KIEE International Transactions on Power Engineering
• /
• 제12A권1호
• /
• pp.15-19
• /
• 2002

The power transfer capability is determined by the thermal, dynamic stability and voltage limits of the generation and transmission systems. The voltage stability depends on the reactive power limit and it affects the power transfer capability to a great extent. Then, in most load flow analysis, the reactive power limit is assumed as fixed, relatively different from the actual case. This paper proposes a method for determining the power transfer capability from a static voltage stability point of view using the IPLAN which is a high level language used with PSS/E program. The f-V curve for determining the power transfer capability is determined using Repeated Power Flow method. It Is assumed that the loads are constant and the generation powers change according to the merit order. The maximum reactive power limits are considered as varying similarly with the actual case and the effects of the varied maximum reactive power limits to the maximum power transfer capability are analyzed using a 5-bus power system and a 19-bus practical power system.

• 농업과학연구
• /
• 제38권3호
• /
• pp.541-547
• /
• 2011

Korean building industry was developed by concrete and steel construction. However, concrete and steel have some problems which low carbon storage capability and difficulty of recycling. According to many studies, timber has high carbon storage capability, high recycling capability and sustainable supporting capability. Focus on this factors of timber, make new wall structure as Green Timber Wall panels and check the shear performance to use wall system in housing construction such as light-weight timber construction and nondearing wall on other construction. In the results, B-4-B and B-4-S show similar modulus of shear stiffness on the table. GH-4-GH has slip shape failure mode between Green Timber Wall boards. GH-4-GV has most stable characteristic curve than other specimens.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.780-785
• /
• 2004

The work presented here deals with controller design by graphical method based on proportional control ramp response. The design aims at the improvement of transient response, disturbance rejection capability, steady-state error reduction with stability preservation. The first step is to generate tracking-error curve with proportional control only and decide the added error signal shape on the error curve. The effectiveness of the proposed controller is confirmed through the simulation and experiment.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1992년도 추계학술대회논문집
• /
• pp.113-120
• /
• 1992

In this paper, a mathematical model of learning curve is proposed to study the finger's reaction time. The model is a logarithmic linear type which represents a learning curve appropriately, and parameters are estimated by the linear. The learning coefficient and percentage of a reaction time can be easily computed in the mathematical model. This quantitative approach provides an important information to be used for the working capability qualification for re-employment as well as for the adaptability estimation of aged workers.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권3호
• /
• pp.263-267
• /
• 2005

Building classifiers for financial real-world classification problems is often plagued by severely overlapping and highly skewed class distribution. New performance measures such as receiver operating characteristic (ROC) curve and area under ROC curve (AUC) have been recently introduced in evaluating and building classifiers for those kind of problems. They are, however, in-effective to evaluation of classifier's discrimination performance in a particular class of the classification problems that interests lie in only a local operating range of the classifier, In this paper, a new method is proposed that enables us to directly improve classifier's discrimination performance at a desired local operating range by defining and optimizing a partial area under ROC curve or domain-specific curve, which is difficult to achieve with conventional classification accuracy based learning methods. The effectiveness of the proposed approach is demonstrated in terms of fraud detection capability in a real-world fraud detection problem compared with the MSE-based approach.