• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.3
• /
• pp.162-173
• /
• 1996

Dry magnetic particle inspection(MPI) was performed to detect the surface defects of steel ingot cast billets. Magnetic properties of several materials were characterized by the measurement of the B-H hysteresis curve. The inspection results were evaluated in terms of the magnetizing current, temperature, and the amount of magnetic particles applied to billets. Magnetic flux leakage near the defect site of interest was measured and compared with the results of calculation by the finite element method in the case of direct magnetizing current. Direct and alternating magnetizing currents for materials were deduced by the comparison of the inspections. Results of the magnetic particle inspection by direct magnetizing current were compared with those of finite element method calculations, which were verified by measuring magnetic leakage flux above the surface and the surface defects of the material. For square rods, due to the geometrical effect, the magnetic flux density at the edges along the length of the rods was about 30% of that at the center of rod face for a sufficiently large direct magnetizing current, while it was about 70% for an alternating magnetizing current. Thus, an alternating magnetizing current generates rather uniform magnetic flux density over the rods, except for the region on the face across about 10 mm from the edge. The attraction of the magnetic particle by the magnetic leakage field was nearly independent of the surface temperature of the billets up to $150^{\circ}C$. However, the temperature should have been limited below $60^{\circ}C$ for an effective fixing of gathered magnetic particles to the billet surface using methylene chloride. We also found that the amount of applied magnetic particles tremendously affected the detection capability.

• Analytical Science and Technology
• /
• v.16 no.5
• /
• pp.358-367
• /
• 2003

In this research, first of all, the analytical methods for the determination of major elements in sediment have been developed with ICP-MS (Inductively Coupled Plasma Mass Spectrometry). The analytical results of major elements (Al, Ca, K, Fe, Mg) with Cool ICP-MS were much better than those with normal ICP-MS. The analytical results were compared with those of NAA (Neutron Activation Analysis). NAA were a little superior to ICP-MS for the determination of major elements in sediment as a non-destructive trace analytical method. The analytical methods for the determination of minor elements (Cr, Ce, U, Co, Pb, As, Se) have been also developed with ICP-MS. The analytical results by standard calibration curve with ICP-MS were not accurate due to the matrix interferences. Thus, the internal standard method was applied, then the analytical results for minor elements with ICP-MS were greatly improved. The analytical results obtained by ICP-MS were compared with those obtained by NAA. It showed that the two analytical methods have great capabilities for the determination of minor elements in sediments. Accordingly, the NAA will play an important role in analysis of environment sample with complex matrix. ICP-MS also will play an important role because it has a great capability for the determination of Pb that could not be determined by NAA.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.45-54
• /
• 2002

This paper proposes a video compression algorithm using characteristics of wavelet coefficients. The proposed algorithm can provide lowed bit rate and faster running time while guaranteeing the reconstructed image qualify by the human virtual system. In this approach, each video sequence is decomposed into a pyramid structure of subimages with various resolution to use multiresolution capability of discrete wavelet transform. Then similarities between two neighboring frames are obtained from a low-frequency subband which Includes an important information of an image and motion informations are extracted from the similarity criteria. Four legion selection filters are designed according to the similarity criteria and compression processes are carried out by encoding the coefficients In preservation legions and replacement regions of high-frequency subbands. Region selection filters classify the high-frequency subbands Into preservation regions and replacement regions based on the similarity criteria and the coefficients In replacement regions are replaced by that of a reference frame or reduced to zero according to block-based similarities between a reference frame and successive frames. Encoding is carried out by quantizing and arithmetic encoding the wavelet coefficients in preservation regions and replacement regions separately. A reference frame is updated at the bottom point If the curve of similarity rates looks like concave pattern. Simulation results show that the proposed algorithm provides high compression ratio with proper Image quality. It also outperforms the previous Milton's algorithm in an Image quality, compression ratio and running time, leading to compression ratio less than 0.2bpp. PSNR of 32 dB and running tome of 10ms for a standard video image of size 352${\times}$240 pixels.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.107-117
• /
• 2017

Since South Korea started to apply Renewable Portfolio Standard (RPS) in 2012, there have been huge investment for deploying renewable technologies. Recently, the government determined to incentivize battery energy storage system(BESS) with renewable generations in order to induce the improvement of dispatching capability. In this paper, the annual pattern of PV generation based on actual generation data in South Korea is analyzed and the duration curve of capacity factor is proposed in order to provide the simplified analyzing methodology of present support policy for additional BESS installation for decision maker who is responsible for supply and demand planning. With suggested methodology, the range of appropriate BESS size with respect to the variation of system marginal price(SMP) and renewable energy certificate(REC) price can be derived briefly, and decision makers easily evaluate the effect of support scheme. Current policy for BESS installation support present additional BESS-related installation policy may give incentives to developers partially, however, the dependence between BESS size and benefit components (SMP and REC) can limit the deployment of the various portfolios of the BESS. Therefore, when improving the current policy in future, addressing the dependence between the technical aspects of battery size and the benefit components separately by the technical and economical parts is needed to set the suitable compensation rules for the renewable generation and BESS.

• Korean Journal of Plant Resources
• /
• v.23 no.4
• /
• pp.374-378
• /
• 2010

Determining plant moisture characteristics is an essential study not only for cultivation, but also for ex-situ conservation. In this study, employing pressure-volume curve we examined moisture characteristics of Rhododendron micranthum, known as rare plant, with the aim of its ex-situ conservation. Several individuals growing in Mt. Worak, Youngwol-gun Yeonha-ri and Bongwa-gun Seokpo-ri were selected for this study, from which we collected leaves. The original bulk osmotic pressure at maximum turgor(${{\Psi}_o}^{sat}$)was -1.5 MPa in those of Mt. Worak and Seokpo-ri, which is somewhat lower than that of Yeonha-ri(-1.2 MPa). It appeared that the osmotic pressure at incipient plasmolysis(${{\Psi}_o}^{tlp}$) of leaves collected in both Mt. Worak and Seokpo-ri were -1.29 MPa, and -1.26 MPa, respectively, which are lower than that of Yeonha-ri(-1.02MPa). Maximum bulk modulus of elasticity($E_{max}$) was 14.0 MPa, 8.67 MPa in leaves collected from both Seokpo-ri and Mt. Worak, respectively, those value of which were approximately 3 times higher than that of Yeonha-ri(4.00 MPa). The values of $RWC_{tlp}$(Relative water content at incipient plasmolysis) of leaves collected in three areas, were roughly 83%, suggesting that Rhododendron micranthum has relatively high capability of containing water. Our finding on moisture characteristics of Rhododendron micranthum is similar to those of other Rhododendron spp. We suggest that individuals growing in both Worak and Seokpo-ri, are preferable to those in Yeonha-ri for ex-situ transplantation since those individuals are found to have better drought resistance.

• Journal of Korea Water Resources Association
• /
• v.50 no.9
• /
• pp.587-595
• /
• 2017

Hydraulic characteristics affecting sediment transport capacity due to the weir operations were investigated and developed sediment rating curves for four gaging stations (Nakdong, Gumi, Waegwan, and Jindong) in Nakdong River. Analysis found that the sediment transportaion capability had been decreased and it could be proved from the field measurement records in 2013. Applicabilities of nine sediment transport prediction techniques, which are imbeded in GUIDE program, were examined and adopted for the four gaging stations. Analysis of sediment balance for Nakdong River, including 9 major tributaries, had been carried out with pseudo 2-D numerical model and found that: 1) sedimentation phenomena will be prevailed along the Nakdong River. 2) Engelund-Hansen technique shows the least error in estimation of sediment balance. 3) Engelund-Hansen technique most appropriately describes the sediment characteristics for four gaging stations. 4) Estimated error from the sediment balance for Nakdong River was smaller than the error caused by the estimation of sediment incomming from 9 tributries. Therefore, it is necessary to improve the accuracy of predicting the sediment incomming from the tributaties for better sediment balance analysis.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.29-42
• /
• 1999

The SASW (Spectral-Analysis-of-Surface-Waves) method, which evaluates the stiffness structure of the subsurface and structures nonintrusively and nondestructively, has been successfully used in the civil engineering applications. However, the SASW method assumes that the subsurface or structures consist of horizontal multi-layers, so that the method has some difficulty in continuously evaluating the integrity of a tunnel lining and a pavement system. This difficulty prevents the SASW method from being used to generate a tomographic image of stiffness for the subsurface or structures. Recently, the GPR technique which has the advantage of continuously evaluating integrity of the subsurface and structures has been popular. This advantage of GPR technique initiated the efforts to make the SASW method, which is superior to GPR and other nondestructive testing methods due to its capability of evaluating stiffness and modulus, be able to do continuous evaluation of stiffness structure, and the efforts finally lead to the development of \ulcornerTomographic SASW Technique.\ulcorner Tomographic SASW technique is a variation of the SASW method, and can generate a tomographic image of stiffness structure along the measurement line. The tomographic SASW technique was applied to the investigation of lateral variability of a sand box placed by the raining method for the purpose of verifying its effectiveness. Tomographic SASW measurements on the sand box revealed that the investigated sand box has different shear stiffness along the measurement line, which gave a clue of how to make a better raining device.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.2
• /
• pp.99-109
• /
• 2018

The precision of the vibration-sensors, contact or non-contact types, is usually satisfactory for the practical measurement applications, but a sensor is confined to the measurement of a point or a direction. Although the precision and frequency span of the low-cost camera are inferior to these sensors, it has the merits in the cost and in the capability of simultaneous measurement of a large vibrating area. Furthermore, a camera can measure multi-degrees-of-freedom of a vibrating object simultaneously. In this study, the calibration method and the dynamic characteristics of the low-cost machine vision camera as a sensor are studied with a demonstrating example of the two-dimensional vibration of a cantilever beam. The planar image of the camera shot reveals two rectilinear and one rotational motion. The rectilinear vibration motion of a single point is first measured using a camera and the camera is experimentally calibrated by calculating error referencing the LDV (Laser Doppler Vibrometer) measurement. Then, by measuring the motion of multiple points at once, the rotational vibration motion and the whole vibration motion of the cantilever beam are measured. The whole vibration motion of the cantilever beam is analyzed both in time and frequency domain.

• Economic and Environmental Geology
• /
• v.38 no.1
• /
• pp.45-55
• /
• 2005

Traditional GIS-based probabilistic spatial data integration models for landslide susceptibility analysis have failed to provide the theoretical backgrounds and effective methods for integration of different types of spatial data such as categorical and continuous data. This paper applies two spatial data integration models including non-parametric empirical estimation and parametric predictive discriminant analysis models that can directly use the original continuous data within a likelihood ratio framework. Similarity rates and a prediction rate curve are computed to quantitatively compare those two models. To illustrate the proposed models, two case studies from the Jangheung and Boeun areas were carried out and analyzed. As a result of the Jangheung case study, two models showed similar prediction capabilities. On the other hand, in the Boeun area, the parametric predictive discriminant analysis model showed the better prediction capability than that from the non-parametric empirical estimation model. In conclusion, the proposed models could effectively integrate the continuous data for landslide susceptibility analysis and more case studies should be carried out to support the results from the case studies, since each model has a distinctive feature in continuous data representation.

• Journal of Clinical Otolaryngology Head and Neck Surgery
• /
• v.29 no.2
• /
• pp.212-222
• /
• 2018

Background and Objectives : The purpose of this study was to compare the measured values of acoustic and auditory perceptual assessments between normal and functional dysphonia (FD) groups. Materials and Methods : 102 subjects with FD and 59 normal voice groups were participated in this study. Mid-vowel portion of the sustained vowel /a/ and two sentences of 'Sanchaek' were edited, concatenated, and analyzed by Praat script. And then auditory-perceptual (AP) rating was completed by three listeners. Results : The FD group showed higher acoustic voice quality index version 2.02 and version 3.01 (AVQIv2 and AVQIv3), slope, Hammarberg index (HAM), grade (G) and overall severity (OS), values than normal group. Additionally, smoothed cepstral peak prominence in Praat (PraatCPPS), tilt, low-to high spectral band energies (L/H ratio), long-term average spectrum (LTAS) in FD group were lower than normal voice group. And the correlation among measured values ranged from -0.250 to 0.960. In ROC curve analysis, cutoff values of AVQIv2, AVQIv3, PraatCPPS, slope, tilt, L/H ratio, HAM, and LTAS were 3.270, 2.013, 13.838, -22.286, -9.754, 369.043, 27.912, and 34.523, respectively, and the AUC of each analysis was over .890 in AVQIv2, AVQIv3, and PraatCPPS, over 0.731 in HAM, tilt, and slope, over 0.605 in LTAS and L/H ratio. Conclusions : In conclusion, AVQI and CPPS showed the highest predictive power for distinguishing between normal and FD groups. Acoustic analyses and AP rating as noninvasive examination can reinforce the screening capability of FD and help to establish efficient diagnosis and treatment process plan for FD.