• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.2
• /
• pp.145-155
• /
• 1997

The effect of various supplies of lead singly and in combination with aluminium on growth and chlorophyll biosynthesis was investigated in 7-day-old Vigna angularis seedlings. Expose to 50 uM Pb or more drastically reduced root elongation rate. Significant depressions in root growth was observed within 1 day and no recovery of growth was seen over the duration of treatment period. Root elongation decreased depending on the Pb concentrations. Root growth inhibition was stronger than shoot growth inhibition. The initiation of lateral roots appeared to be more sensitive to Pb than the growth of main roots. Inhibition of root and shoot elongation by Pb was lessened by combined exposure of Pb and Al, suggesting that the presence of Al reverse the inhibitory effect of Pb alone. With the histochemical sodium rhodizonate method the rate of Pb uptake was dependent on the Pb concentration and exposure time of the roots to Pb salts. Pb was first deposited on the root surface and then translocated radially in the root cap cells. During a longer Pb administration (up to 72 h) Pb penetration was nonuniform, with accumulation within the cortex or endodermis. There was drastic reduction in chlorophyll content by Pb. The Pb inhibition of chlorophyll synthesis was concentration dependent. $\delta-Aminolevulinic$ acid dehydratase (ALAD) activity exhibited distinct inhibition from control. Reduction in chlorophyll content was accompanied by proportional changes in ALAD activity. Chlorophyll content and ALAD activity were less affected by combined exposure of Pb and Al, suggesting that Al has a protective effect against the inhibiting action of Pb on photosynthetic activity.

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.423-434
• /
• 2009

In recent years, the urban thermal environment has become worse, such as days on which the temperature goes above $30^{\circ}C$, sultry nights and heat stroke increase, due to the changes in terrestrial cover such as concrete and asphalt and increased anthropogenic heat emission accompanied by artificial structure. The land use type is an important determinant to near-surface air temperature. Due to these reasons we need to understand and improve the urban thermal environment. In this study, the fifth-generation Pennsylvania State University-National Center for Atmospheric Research Mesoscale Model(MMS) was applied to the metropolitan of Daegu area in order to investigate the influence of land cover changes and urban modifications increase of Albedo to the surface energy budget on the simulated near-surface air temperature and wind speed. The single urban category in existing 24-category U.S. Geological survey land cover classification used in MM5 was divided into 6 classes to account for heterogeneity of urban land cover. As a result of the numerical simulation intended for the metropolitan of Daegu assumed the increase of Albedo of roofs, buildings, or roads, the increase of Albedo (Cool scenario)can make decrease radiation effect of surface, so that it caused drops in ambient air temperature from 0.2 to 0.3 on the average during the daylight hours and smaller (or near-zero) decrease during the night. The Sensible heat flux and Wind velocity is decreased. Modeling studies suggest that increased surface albedo in urban area can reduce surface and air temperatures near the ground and affect related meteorological parameters such as winds, surface air temperature and sensible heat flux.

• Geotechnical Engineering
• /
• v.12 no.5
• /
• pp.63-78
• /
• 1996

Various type of in-situ and laboratary tests were performed in order to evaluate the stiffness of sedimentary soft rock. In triaxial compression tests of sedimentary soft rocks, axial strains from the axial displacement of the loading piston or specimen cap conventionally were considerably larger than those measured. tocally on the lateral surfaces of specimen, due to the bedding errors at the top and bottom ends of a specimen. A local deformation transducer was used to measure axial strains free from the bedding error ranging from 0.001% to about 1%. In ultra-sonic wave tests, the elastic modulus of unconfined spec imens was smaller than that of confined specimens, due probably to microfracks. Young's modulus Ed from ultra-sonic wave tests and those at small local strains from triaxial tests were similar, both of which agreed very well with Young's modulus Er from field shear wave velocities. Young'a modulus from the field behaviour was virtually similar to that obtained by reducing Er based on the strain level-dependency of stiffness evaluated by the triaxial tests.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.3
• /
• pp.43-51
• /
• 2011

This paper describes the results of pullout tests in the laboratory, which are conducted to assess the pullout performance of recently developed geosynthetic strip reinforcement with rounded band anchor. The geosynthetic strip can be used as reinforcements in reinforced soil wall with concrete block facing. The pullout resistance of the geosynthetic strip with rounded band anchor is mobilized by the combination of the interface friction between soil-reinforcement surface and the passive soil resistance caused by the rounded band anchor. Therefore, both the friction resistance and the passive resistance have to be considered in design. From the pullout test results, when the rounded band anchor are formed in the end part of the geosynthetic strip, pullout strength increases about from 10% to 65%. The passive resistance can be evaluated based on the pullout test results.

• Membrane and Water Treatment
• /
• v.11 no.1
• /
• pp.11-23
• /
• 2020

The effectiveness of in situ sediment capping as a technique for heavy metal risk mitigation in Hyeongsan River estuary, South Korea was studied. Sites in the estuary were found previously to show moderate to high levels of contamination of mercury, methylmercury and other heavy metals. A 400 m × 50 m section of the river was selected for a thin layer capping demonstration, where the total area was divided into 4 sections capped with different combinations of capping materials (zeolite, AC/zeolite, AC/sand, zeolite/sand). Pore water concentrations in the different sites were studied using diffusive gradient in thin film (DGT) probes. All capping amendments showed reduction in the pore water concentration of the different heavy metals with top 5 cm showing %reduction greater than 90% for some heavy metals. The relative maxima for the different metals were found to be translated to lower depths with addition of the caps. For two-layered cap with AC, order of placement should be considered since AC can easily be displaced due to its relatively low density. Investigation of methylmercury (MeHg) in the site showed that MeHg and %MeHg in pore water corresponds well with maxima for sulfide, Fe and Mn suggesting mercury methylation as probably coupled with sulfate, Fe and Mn reduction in sediments. Our results showed that thin-layer capping of active sorbents AC and zeolite, in combination with passive sand caps, are potential remediation strategy for sediments contaminated with heavy metals.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1507-1510
• /
• 2012

Quantitative trait loci (QTL) associated with fat deposition traits in pigs are important gene positions in a chromosome that influence meat quality of pork. For QTL study, a three generation resource population was constructed from a cross between Korean native boars and Landrace sows. A total of 240 F2 animals from intercross of F1 were produced. 80 microsatellite markers covering chromosomes 1 to 10 were selected to genotype the resource population. Intervals between adjacent markers were approximately 19 cM. Linkage analysis was performed using CRIMAP software version 2.4 with a FIXED option to obtain the map distances. For QTL analysis, the public web-based software, QTL express (http://www.qtl.cap.ed.ac.uk) was used. Two significant and two suggestive QTL were identified on SSC 6, 7, and 8 as affecting body fat and IMF traits. For QTL affecting IMF, the most significant association was detected between marker sw71 and sw1881 on SSC 6, and a suggestive QTL was identified between sw268 and sw205 on SSC8. These QTL accounted for 26.58% and 12.31% of the phenotypic variance, respectively. A significant QTL affecting IMF was detected at position 105 cM between markers sw71 and sw1881 on SSC 6.

• Journal of the Korean Society of Costume
• /
• v.62 no.4
• /
• pp.164-180
• /
• 2012

This study focuses on the hats in the advertisements of the newspapers from the Greater Korean Empire to the Time of Independence. There were Yeomo(禮帽), Jungsanmoja(中山帽子), Jungjeolmoja(中折帽子), Women's hat, Undongmoja(運動帽子), and Hakdomoja(學徒帽子) from 1897 to the 1900s. The names of the hats were written with Chinese characters as there was no specific name for women's hats. There were a lot of hats in the 1910s; Jungjeolmoja, Jungsanmoja, Hukyeomoja(黑禮帽子), Panama, Doriuchi(鳥打;とり-うち), Maggomo(麥程帽), Ilkyomoja(一交字帽), cheongyeonmo(靑年帽), Jajacheongyeonmo(刺子靑年帽), Hakaaksangmo(學生帽), Undongmo, Laparyunmoja, Banghanmo(防寒帽), Mokchulmo(目出帽), Pungbangi(風防耳), Nambaui, and Pungdongi(風憧耳). Most of the hats were western hats for men. From the 1920s to 1930s, the hats were classified as to the shape and uses as compared to before that period. The hats were advertised in the newspapers such as Jungjeolmoja, Jungsanmoja, Panama, Doriuchimo, Maggomo, Ilkyomoja, cheongyeonmo, Jajacheongyeonmo, Hakaaksangmo, Undongmo, Banghanmo, Mokchulmo(目出帽), Adongmokchulmo(兒童目出帽), Pungdongi, and Pungchasamsangun(風遮三山巾). There is little information about hats from the late 1930s to the time of independence because of the censorship of the press. The hats during that period were almost the same as the before that time. There was a new name of a cap, Jeontumoja(戰鬪帽子) which was for a soldier. The hats in that period were one of the westernized items with shoes before the westernization of the Korean costume under Japanese imperialism. Furthermore, the western hats could be spread by the men who were in the center of the society. On the other hand, women's western hats were not common because women had rarely worn them before that period. They just wore traditional winter caps steadily.

• 한국전산유체공학회:학술대회논문집
• /
• 1996.05a
• /
• pp.52-57
• /
• 1996

Mixing is most important for developing an electric washer which transforms angular momentum from rotating solid wall to laundry clothes inside it. For magnification of this mixing effect, some inventions are introduced to washing machine system, i. e., washing plate, washing rod, and even for washing cap in a model of a Korean manufacture. However, the previous efforts show dissatisfaction up till now. In this paper, a triumph to enhance mixing effects to increase washing performance is presented and verified by numerical investigation. The present model to simulate a washing tub is the simple circular cylinder with two endwall disks which is completely filled with a viscous liquid. The present improvement is to change mounting position of a bottom disk of the model cylinder. Therefore, the aim of this work just proposes a new idea, which is numerically inspected, to a producer of washing machine, In detail, this invention is alternating the mounting position of a rotating bottom disk. Actually skewed pulsator is placed in steady of a flat disk, so the two endwall disks at top and bottom are not in parallel. The angle between an inclined bottom disk and the horizontal plane is fixed as 5 degree and physical domain to consider poses a sliced cylinder. Flow fields in both a right circular cylinder and the present improved model are fully depicted by numerical integration on a body fitted nonorthogonal regular uniform grid system. Numerical data to explain flow structure are plotted for understanding of the effects of the inclined disk. Also enhanced mixing effects by the inclined rotating disk are gauged by accurate numerical data used in this work.

• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.286-292
• /
• 2009

The purpose of this study is to analyze the pattern of the present flight suit, to select variables of human body and key dimensions for making pattern of the flight suit, and to decide the most appropriate size of human body and rate of ease for designing an overall flight suit. For analyzing the pattern of flight suit, we used "M95Special" (men ; chest circumference 92-97 cm ; height : above 177 cm), which was indicated as the standard of the Ministry of National Defense. We analyzed general appearance and the actual dimensions of the pattern of the flight suit. As a result of analyzing the pattern, flight suit was front-opened overall style which had a flat collar with rounded edges, two-pieced sleeves with lower height of the sleeve's cap, 3cm-width belt on the waist and 8 pockets. To decide the most appropriate size of human body, we selected 20 variables of human body in the 359 variables of the Size Korea by referring the previous studies. The 20 variables of human body were 9 circumferences (chest, waist, hip, neck, armscye, wrist, thigh, knee, and ankle), 9 lengths (stature, back interscye fold, waist back, crotch height, crotch, body rise, arm, outside leg and total), and 2 breadths (biacromial and chest). We drew out the size of 20 variables from the Size Korea and US Army anthropometry data and decided the most appropriate values from the drawn data for applying to the pattern of flight suit.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.858-868
• /
• 2016

This study aims to examine the formative characteristics of seniors' fashion in overseas social media, and look into the psychological characteristics of seniors by analyzing the emotions and the characteristics of psychological mechanism in seniors' fashion. The study methods include statistical analysis and content analysis for literary study and data analysis. For data analysis, statistical and content analyses were conducted to analyze 992 data collected from Advanced style, Facebook, and Instagram for 4 years from 2013 to 2016. In formative features shown at overseas social media, circle and square silhouette, achromatic color and warm color, showy tone color, soft material, horizontal details, plain and natural patterns, cap and sunglasses production, and sophisticated elegance styles appeared high. The emotional characteristics in senior's fashion had a silhouette that expressed stability, color that expressed passion, love, happiness, joy, hope and comfort. Materials were expressed by the emotions of dependence and attachment, details were expressed by stable, maternal, calm, comfortable and harmonious emotions. Patterns were expressed by the images of beauty, love, fruit and psychological stability. Accessories were expressed by young and characterful images. Style expressed the emotions of trust, pride, longing, intoxication and ecstasy. The characteristics of psychological mechanism used such shapes and patterns as flower, heart and lips to symbolize the emotions of love, humor, and fun. Young and trendy fashion were expressed in compensation for aging. Kitsch and kidult style was expressed by regression. Elegance fashion was expressed by the sublimation of pride, trust and intoxication.