• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2C
• /
• pp.49-60
• /
• 2012

In this study, the behaviors of friction pile groups are investigated using 3D finite element (FE) analysis. The emphasis was quantifying on the shear load transfer (f-w) characteristics of pile groups and the shaft group effects. A framework for determining the f-w curve is proposed based on both theoretical analysis and field load test database. Through comparisons with case histories and FE results, it is shown that the proposed f-w curve is capable of predicting the behavior of a friction pile in deep soft clay. Additionally, a numerical analysis that takes into account the group efficiency factors were performed for major parameter on group pile-soil interaction, such as the pile spacing, pile arrangement, soil condition, and location of pile cap. Based on these results, the shaft group efficiency factors were also proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.10
• /
• pp.3199-3210
• /
• 1996

The buckling and postbuckling behaviors were sutdied analytically and experimentally for stiffened laminated composite panels under compression loading. The panels with I-, blade, -and hat-shapeed stiffeners were investigated. In the analysis, the stiffened panels were anlyzed using the nonlinear finite element method combined with an improved arc-length method. The progressive failure analysis was done by adopting the maximum stress criterion and complete unloading failure model. The effects of the fiber angles were investigated on the buckling and postbuckling behaviors. In the experiment, the web and the lower cap of each stiffener were formed by the continuous lay-up of the skin for cocuring the stiffened panels. Therefore, the separation between stiffener and skin was not found in the junction part even after postbuckling ultimate load and the stiffened panels had excellent postbuckling load carrying capacity. A shadow moire thchnique was used to monitor the out-of-plane deformations of the panels. The piezoelectric films were attached to the panels to get the failure characteristics of the panel. The analytical results on the buckling load, postbuckling ultimate load, and failure pattern showed good agreement with the experimental results.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.877-887
• /
• 2011

The purpose of Sassanian dynasty was to succeed the civilization of Achaemenid dynasty but it shows vestiges of Parthian civilization in many ways. This study is an attempt to take a look at Sassanian civilization through analyzing these rock reliefs since these features are shown on the rock relief of Ardashir I in early Sassanian Iran. The way carried out this study was first, to collect and search documentary data to establish the theoretical background, and collect positive data by exploring this region and then we comparatively analyzed the two data in general and the result is the following: The form of costume is different according to the person's status. In the early period of Ardashir I the costume style of the royals is reflected by clothes such as tunic, trousers in parthian style. However, trousers do not have vertical pleats which are commonly shown in the case of parthian trousers. It assumed that after the early period of Ardashir I, Sassanians formed their own styles. The form of cap is also different according to the person's status. Ardashir I and the Ahura mazda god put on crown and Korymbos which symbolized the sovereign power. Except the king and the god, the prince and the king's vassal put on high caps called Kolah. Diadem which symbolized sovereign power of king was used by the king, the god and the crown prince. There are two kinds of diadem. The first form has vertical pleats and the other does not have pleats. This form became different depending on the social position. The form of hairstyle is generally thick curly hair which goes down until the shoulder. There is no difference in their hairstyle in terms of the social position. The beard style is generally in the form of scoop. There is also no difference in terms of the person's status.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5835-5854
• /
• 2017

The implementation of IEEE 802.15.6 in Wireless Body Area Network (WBAN) is contention based. Meanwhile, IEEE 802.15.4 MAC provides limited 16 channels in the Superframe structure, making it unfit for N heterogeneous nature of patient's data. Also, the Beacon-enabled Carrier-Sense Multiple Access/Collision-Avoidance (CSMA/CA) scheduling access scheme in WBAN, allocates Contention-free Period (CAP) channels to emergency and non-emergency Biomedical Sensors (BMSs) using contention mechanism, increasing repetition in rounds. This reduces performance of the MAC protocol causing higher data collisions and delay, low data reliability, BMSs packet retransmissions and increased energy consumption. Moreover, it has no traffic differentiation method. This paper proposes a Low-delay Traffic-Aware Medium Access Control (LTA-MAC) protocol to provide sufficient channels with a higher bandwidth, and allocates them individually to non-emergency and emergency data. Also, a Contention Differentiated Adaptive Slot Allocation CSMA-CA (CDASA-CSMA/CA) for scheduling access scheme is proposed to reduce repetition in rounds, and assists in channels allocation to BMSs. Furthermore, an On-demand (OD) slot in the LTA-MAC to resolve the patient's data drops in the CSMA/CA scheme due to exceeding of threshold values in contentions is introduced. Simulation results demonstrate advantages of the proposed schemes over the IEEE 802.15.4 MAC and CSMA/CA scheme in terms of success rate, packet delivery delay, and energy consumption.

• Fire Science and Engineering
• /
• v.22 no.4
• /
• pp.54-60
• /
• 2008

In this study, damage characteristics of MCCB and terminal block due to poor contact were analyzed, and various poor contact detection techniques were suggested. Firstly, the detection techniques using thermocouple and infrared thermal camera were analyzed respectively. Also, thermo-cap during poor contact detected abnormal status effectively by changing its color, and the detection system using an odor detector and odor capsules was analyzed. Lastly, poor contact detection screw was made using characteristics of fusible alloy, and we applied the poor contact detection screw to terminal block. The above methods could prevent electrical fire caused by poor contact effectively if they are used properly.

• Coupled systems mechanics
• /
• v.7 no.4
• /
• pp.455-483
• /
• 2018

The study deals with physical modeling of a typical three storeyed building frame supported by a pile group of four piles ($2{\times}2$) embedded in cohesive soil mass using three dimensional finite element analysis. For the purpose of modeling, the elements such as beams, slabs and columns, of the superstructure frame; and that of the pile foundation such as pile and pile cap are descretized using twenty noded isoparametric continuum elements. The interface between the pile and the soil is idealized using sixteen node isoparametric surface element. The soil elements are modeled using eight nodes, nine nodes and twelve node continuum elements. The present study considers the linear elastic behaviour of the elements of superstructure and substructure (i.e., foundation). The soil is assumed to behave non-linear. The parametric study is carried out for studying the effect of soil- structure interaction on response of the frame on the premise of sub-structure approach. The frame is analyzed initially without considering the effect of the foundation (non-interaction analysis) and then, the pile foundation is evaluated independently to obtain the equivalent stiffness; and these values are used in the interaction analysis. The spacing between the piles in a group is varied to evaluate its effect on the interactive behaviour of frame in the context of two embedment depth ratios. The response of the frame included the horizontal displacement at the level of each storey, shear force in beams, axial force in columns along with the bending moments in beams and columns. The effect of the soil- structure interaction is observed to be significant for the configuration of the pile groups and in the context of non-linear behaviour of soil.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7695-7700
• /
• 2015

Background: HER2/neu overexpression on cell membranes of breast cancer cells is due to HER2/neu gene amplification and it is important to identify potential candidates for anti HER2 therapy with trastuzumab. IHC, FISH and CISH are standard FDA approved assays currently used to determine HER2 status in routine practice. The aim of this study was to determine HER2 gene amplification, using the CISH method in breast carcinoma samples which had IHC +2 reactions. Materials and Methods: This study was conducted from 2008-2010 using 334 consecutive breast carcinoma samples referred from local laboratories to Mehr Hospital. CISH assays were performed for all cases, and IHC tests were also done for determining efficacy and accuracy of local labs. HER2 status in local IHC tests was compared with central IHC and CISH results. Results: Of 334 breast cancer patients, 16 were negative for HER2 IHC (0, +1), 201 cases were equivocal (+2), and 31 positive (+3). Of 334 referral cases, 88 were CISH positive (26.3%) and 246 were CISH negative (73.7%). Of 201 IHC +2 cases, HER2 gene amplification was observed in 42 cases (kappa: 0.42). A 29.9% concordance was found between local IHC and central IHC. Sensitivity and specificity of local IHC were 90% and 53.8%, respectively. Conclusions: Low accuracy of IHC results in local labs was associated with the following factors: using former FDA-approved criteria for HER2 interpretation, utilizing non-validated kits, and lack of any quality assurance program. Therefore, following the new 2014 ASCO/CAP guideline and comprehensive quality assurance should be implemented to ensure accuracy of HER2 testing.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.57-61
• /
• 2016

Thick film sealing glass paste is required for cell packaging of NaS based battery for energy storage system, to join the beta-alumina electrolyte tube and the alpha-alumina battery cell cap components. This paper presents the effect of the particle sizes of seal glass powder and the sealing temperatures on the microstructure of the glass sealants was investigated. It was found that the larger in the particle size of seal glass powder, the smaller the pore volume and the number of pores in a unit area. Also, the number of pores decreased with increasing the sealing temperatures while the pore size was increased. This result enables the control of porosity, pore distribution and number of pores in a microstructure of glass sealing component by proper selection of glass powders particle size and sealing temperature.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.403-409
• /
• 2005

Mature nodal segments of 2-year-old greenhouse stock plant were cultured on Murashige and Skoog basal medium supplemented with the different kinds and various concentrations of cytokinins to produce multiple shoots in in vitro condition. The most adventitious shoots were produced from excised ends of nodal segments. The highest average number $(24.6\;{\pm}\;4.6)$ of shoots was produced with the combination of BA 1.0mg/L and TDZ 0.1mg/L in MS medium. In addition, several shoots were formed from lenticels of bark cambium with the same treatment. These concentrations promoted high shooting capability upto $94.6\%$ and NAA was the best cytokinin among five different PGR sources.

• Development and Reproduction
• /
• v.18 no.3
• /
• pp.179-186
• /
• 2014

Characteristics of the developmental stages of spermatids during spermiogenesis and phylogenetic classicfication of the species using sperm ultrastructures in male Crassostrea ariakensis were investigated by transmission electron microscope observations. The morphology of the spermatozoon of this species has a primitive type and is similar to those of Ostreidae. Ultrastructures of mature sperms are composed of broad, modified cap-shaped acrosomal vesicle and an axial rod in subacrosomal materials on an oval nucleus, four spherical mitochondria in the sperm midpiece, and satellite fibres which appear near the distal centriole. The axoneme of the sperm tail shows a 9+2 structure. Accordingly, the ultrastructural characteristics of mature sperm of C. ariakensis resemble to those of other investigated ostreids in Ostreidae in the subclass Pteriomorphia. In this study, particularly, two transverse bands (stripes) appear at the anterior region of the acrosomal vesicle of this species, unlike two or three transverse bands (stripes) in C. gigas. It is assumed that differences in this acrosomal substructure are associated with the inability of fertilization between the genus Crassostrea and other genus species in Ostreidae. Therefore, we can use sperm ultrastructures and morphologies in the resolution of taxonomic relationships within the Ostreidae in the subclass Pteriomorphia. These spermatozoa, which contain several ultrastructures such as acrosomal vesicle, an axial rod in the sperm head part and four mitochondria and satellite fibres in the sperm midpiece, belong to the family Ostreidae in the subclass Pteriomorphia.