• The Korean Journal of Food And Nutrition
• /
• v.9 no.2
• /
• pp.107-115
• /
• 1996

In order to study the effect of modified starch and biopolymer on the quality of smoked pork sausage, acetylated starch and biopolymer were added to the smoked pork sausage and physical characteristics, sensory qualify, and water holding capacity were Investigated. In the textural characteristics SA, SB and SC group were lower in hardness than control group. Cohesiveness was lower only on the SA group which was added by 0.6% acetylated starch. Adhesiveness was higher on the SA and SC group by addition of biopolymer. All treatment group were lower in springiness than control group. The effect of biopolymer and acetylated starch on gumminess and chewiness was evident but not constant In each group. In the mechanical characteristics such as hardness, springiness, gumminess, chewiness were indicated positive correlation coefficient, the other hand negative correlation in adhesiveness. The result of folding test was not changed in 20 days storage. At 30 days storage SB group contained the 0.6% acetylate starch showed the best point. The other hand the biopolymer added SA and SC group less acceptable, the biopolymer added SA and SC group, which were added by biopolymer and acetylated, indicated cap. 65% lower VBN value than control group. Sensory evaluation were not significantly difference in hardness, fracturability and adhesiveness but cohesiveness was higher in SC group. Gumminess was significantly higher in SA and SC group by biopolymer addition. Overall acceptability in sensory evaluation were significantly higher In SC group by biopolymer addition. Overall acceptability in sensory evaluation correlated significantly with fracturability, chewiness and gumminess. Chewiness of sensory evaluation and mechanical gumminess were not significantly correlated.

• Journal of Chest Surgery
• /
• v.41 no.5
• /
• pp.667-670
• /
• 2008

Occult bronchial foreign bodies are rare in adults, whereas tracheobronchial aspiration of foreign bodies occurs commonly in children. Treatment guidelines, according to the severity of the bronchial or lung parenchymal damage and the duration of foreign body retention, have not been established. A 40-year-old man with chronic cough, sputum production, and fever was transferred for treatment of right middle and lower lobe collapse and obstructive pneumonitis as evidenced by imaging studies. He had aspirated the cap of a felt-tipped pen 30 years before presentation, which was unrevealed until his medical history was carefully reviewed during this episode. The patient was treated with right middle-lower bilobectomy because fiberoptic bronchoscopic removal of the foreign body failed. This case added important information to our body of knowledge concerning the various clinical features of occult bronchial foreign bodies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.538-539
• /
• 2013

여러 장점으로 인해 OLED는 디스플레이 및 조명 등 적용분야가 넓어지고 있지만, 수분 및 산소에 취약하여 그 수명이 제한되는 단점이 있다. 이를 해결하고자 현재까지는 glass cap을 이용한 encapsulation 기술이 적용되고 있지만, flexible 기판에 적용하지 못하는 문제가 있다. 이러한 문제를 해결하고자 여러 가지 thin film encapsulation 기술이 적용되고 있으나 보다 신뢰성이 높은 기술의 개발이 절실한 때이다. Encapsulation 무기 박막 물질로서 $Si_3N_4$ 박막은 PE-CVD (Plasma Enhanced Chemical Vapor Deposition) 등의 박막 증착법을 사용한 많은 연구가 진행되어, 저온에서의 좋은 품질의 박막 증착이 가능하지만, 100도 이하의 thermal budget을 갖는 OLED Encapsulation에 사용하기에는 충분하지 않았다. CVD 박막의 특성을 더욱 개선하기 위해 최근 ALD (Atomic Layer Deposition) 방법을 통한 $Al_2O_3$ film 증착 방법이 연구되고 있지만, 낮은 증착 속도로 인해 양산에 걸림돌이 되고 있다. 본 연구에서는 또 다른 해결책으로서 Digital CVD 방법을 이용한 양질의 $Si_3N_4$ 박막의 증착을 연구하였다. 이것은 ALD 증착법과 유사하며, 1st step에서 PECVD 방법으로 4~5 ${\AA}$의 얇은 silicon 박막을 증착하고, 2nd step에서 nitrogen plasma를 이용하여 질화 반응을 진행하고, 이러한 cycle을 원하는 두께가 될 때까지 반복적으로 진행된다. 이 때 1 cycle 당 증착속도는 7 ${\AA}$/cycle 정도였다. 최적의 증착 방법과 조건으로 기존의 CVD $Si_3N_4$ 박막 대비 1/5 이하로 pinhole을 최소화 할 수는 있지만 완벽하게 제거하기는 힘든 문제가 있고, 이를 해결하기 위한 개선을 위한 접근 방법이 필요하다고 판단하였다. 본 연구에서는 무기물 박막인 carbon nitride를 이용한 SiN/C:N multilayer 증착 연구를 진행하였다. Fig. 1은 CVD 조건으로 증착된 두께 750 nm SiN film에서 여러 층의 C:N film layer를 삽입했을 때, 38 시간의 85%/$85^{\circ}C$ 가속실험에 따라 OLED의 발광 사진이다. 그림에서 볼 수 있듯이 C:N 층을 삽입하고 또한 그 박막의 수가 증가함에 따라서 OLED에 대한 encapsulation 특성이 크게 개선됨을 확인할 수 있다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.168-178
• /
• 2002

This study is aimed at investigating and comparing the differences in the uniform of nurses according to regions and hospital size in Korea. This study takes two large regions as its survey area; one is Seoul, Incheon and Gyeonggi Province, and the other is Daejon and Chungcheong Province. The hospital size is divided into general hospitals and neighborhood hospitals. The survey was conducted among the nurses working in 12 randomly-selected hospitals and its statistical results are analysed firm 818 respondents'questionnaires. The results are divided into 3 categories as follows; 1) Results of analysis of survey on the uniform of nurses : Nurses usually wear two-piece suits and more than half of the hospitals choose a white-color pattern. And the nurse's uniform with color varying according to their position and ward is considered to be desirable; 2) Analysis on regional differences : In the case of Daejon and Chungcheong Province, there is a relatively high ratio of respondents who answered questions with 'high percentage of young nurses', 'position differentiation by means of different design and fabric according to ward'. In case of Seoul, Incheon and Gyeonggi Province, questions with 'use of a patterned textile in nurses'uniform', 'ready-made size system'are higher; 3) Analysis of the differences in accordance with hospital size : In the case of general hospitals, there is relatively a high ratio of respondents who answered questions with 'use of different design and fabric according to a nurse's position', 'use of patterns in nurses'uniform'. In the case of neighborhood hospitals, there is a high ratio of respondents with'use of classical one-piece or two-piece type wear', 'ready-made type size system', 'obligatory use off nurse's cap'.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.73-89
• /
• 2017

This research aimed to identify the characteristics of outdoor apparel market for new seniors. To achieve this goal, influence of new seniors' lifestyle and apparel purchase criteria of design preferences of outdoor apparel products were investigated. An online-survey was conducted targeting fifties who have bought outdoor apparel within one year. The collected data were carried out for factor analysis, independent sample T-test, and regression analysis by using SPSS 22.0. Results showed that new seniors' lifestyles were composed of appearance-orientation, well-being diet, well-being exercise, self-development, and challenge-orientation. Purchase criteria of outdoor apparels were factored out as practical, aesthetic, and social. Appearance -orientation and self-development affect aesthetic and social factors. Well-being diet influences all factors of purchase criteria. Challenge -orientation has effect only on social factor. Women favored round-and V-neckline more than men did as well as preferred half and 3/4 long for sleeve. Customers who value practical purchase criteria preferred half-sleeve, zipper, and button-closure designs. In contrast, customers who have aesthetic purchase criteria like round/V-neckline and cap sleeve. Social factor affected high neckline and vivid-tone color preference significantly. As outdoor design for new senior it is critical to introduce differentiation of outdoor brand with various designs combining functionalities of outdoor activities and style looking young and dandy, which is highlighted as trendy and casual, over current outdoor apparels' unified design.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.42-47
• /
• 2004

In this paper, we analyzed on the characteristics of the stranded wire disconnected by repeated stress. The stranded wires that were used in the experiment are PVC insulated flexible cords(VCTFK: Vinyl Insulated Vinyl Cabtyre Cord Flat-type) of $0.75mm^2,\;1.25mm^2,\;and\;2.0mm^2$. They are used to connect the load in low voltage. The stranded wires disconnected by repeated stress were magnified with optical microscope. Using X-ray, the disconnected wire were photo-graphed. we compared mechanical characteristics of the stranded wire between disconnected tendency and allowable current. On the mechanical strength of vinyl cap tire ellipse type cords under bending stress, VCTFK of $1.25mm^2$ was the strongest of them. When it was bent $826.3\pm7$ times, it appeared the disconnected tendency that element wires of VCTFK of $1.25mm^2$ are more about 1.67 times than element wires of VCTFK of $0.75mm^2$. In mechanical strength, VCTFK of $1.25mm^2$ is higher about 1.7 times than VCTFK of $0.75mm^2$. Therefore, we found out that mechanical strength was higher, when the wire had a lot of element wires. In comparison with bending stress, VCTFK of $1.25mm^2$ is the strongest among samples, and it is the most useful in wires of movable type.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.561-571
• /
• 2005

To introduce an emissions trading system for GHG that currently have no reduction requirements, the following should be considered as priorities: eliciting the participation of the industrial sector and linking GHG emission trading systems to the emissions trading system (implemented from July 2007) that has become part of national policy with the enactment of the Special Act. Two directions can serve as viable alternatives in that regard. One is a baseline-and-credit method based on incentive auctioning. This has the advantage of inducing participation through economic incentives without a reductions commitment. The downside of this method is that it requires vast investments, as well as the fact that reaching an agreement between participants and the government to decide an objective baseline is difficult. On the other hand, the cap-and-trade method set forth in the Special Act is attractive in that it can be integrated with the air pollutant emissions trading system, but it would be difficult to elicit the participation of the industrial sector in the absence of GHG emission reduction requirements. In the current situation, it would be preferable for the government to induce the participation of the industrial sector by devising a wide variety of incentives because taking part in the emissions trading system before reducing GHG emissions offers large incentives through learning by doing. The timing of GHG reduction commitments and emissions trading system implementation may be uncertain but their Implementation will be unavoidable. Thus the government needs to facilitate preparations for emissions trading of GHG in the future and continuously review its operation in integration with the air pollutant emissions trading system to maximize adaptation and teaming by doing effect in the industrial sector.

• Structural Engineering and Mechanics
• /
• v.49 no.1
• /
• pp.95-110
• /
• 2014

The study deals with physical modeling of space frame-pile foundation and soil system using finite element models. The superstructure frame is analyzed using complete three-dimensional finite element method where the component of the frame such as slab, beam and columns are descretized using 20 node isoparametric continuum elements. Initially, the frame is analyzed assuming the fixed column bases. Later the pile foundation is worked out separately wherein the simplified models of finite elements such as beam and plate element are used for pile and pile cap, respectively. The non-linear behaviour of soil mass is incorporated by idealizing the soil as non-linear springs using p-y curve along the lines similar to that by Georgiadis et al. (1992). For analysis of pile foundation, the non-linearity of soil via p-y curve approach is incorporated using the incremental approach. The interaction analysis is conducted for the parametric study. The non-linearity of soil is further incorporated using iterative approach, i.e., secant modulus approach, in the interaction analysis. The effect the various parameters of the pile foundation such as spacing in a group and configuration of the pile group is evaluated on the response of superstructure owing to non-linearity of the soil. The response included the displacement at the top of the frame and bending moment in columns. The non-linearity of soil increases the top displacement in the range of 7.8%-16.7%. However, its effect is found very marginal on the absolute maximum moment in columns. The hogging moment decreases by 0.005% while sagging moment increases by 0.02%.

• Geomechanics and Engineering
• /
• v.11 no.4
• /
• pp.553-570
• /
• 2016

A series of three-dimensional (3D) parametric finite element analyses have been performed to study the influence of the relative locations of pile tips with regards to the tunnel position on the behaviour of single piles and pile groups to adjacent tunnelling in weathered soil. When the pile tips are inside the influence zone, which considers the relative pile tip location with respect to the tunnel position, tunnelling-induced pile head settlements are larger than those computed from the Greenfield condition. However, when the pile tips are outside the influence zone, a reverse trend is obtained. When the pile tips are inside the influence zone, the tunnelling-induced tensile pile forces mobilised, but when the pile tips are outside the influence zone, compressive pile forces are induced because of tunnelling, depending on the shear stress transfer mechanism at the pile-soil interface. For piles connected to a cap, tensile and compressive forces are mobilised at the top of the centre and side piles, respectively. It has been shown that the increases in the tunnelling-induced pile head settlements have resulted in reductions of the apparent factor of safety up to approximately 43% when the pile tips are inside the influence zone, therefore severely affecting the serviceability of the piles. The pile behaviour, when considering the location of the pile tips with regards to the tunnel, has been analysed in great detail by taking the tunnelling-induced pile head settlements, axial pile forces, apparent factor of safety of the piles and shear transfer mechanism into account.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.174-183
• /
• 2013

This study in the lives of single-parent female households demographic and economic variables and economic stress quality financial satisfaction and physical health status and psychological distressed affect were analyzed. The study took advantage of an analysis of a sample of 430 people living in care facilities nationwide cap material. Using SAS 9.1 (Statistical Analysis System) were analyzed by the research model to set a single-parent female head of household demographic and economic characteristics, economic satisfaction, physical health status, was found to have a negative effect on the quality of life psychologically distressed. Also was identified as a single-parent female households experience economic stress have a negative effect on their quality of life. Especially, showed the biggest influence on the psychologically distressed was a significant influence financial satisfaction and physical health status in.