• The Plant Pathology Journal
• /
• v.32 no.6
• /
• pp.508-518
• /
• 2016

Early blight of tomato caused by Alternaria solani, is responsible for severe yield losses in tomato. The conidia survive on soil surface and old dry lower leaves of the plant and spread when suitable climatic conditions are available. Macroclimatic study reveals that highest inoculum concentration of Alternaria spores appeared in May 2012 to 2013 and lowest concentration during January 2012 to 2013. High night temperature positively correlated and significantly (P < 0.01) involved in conidial spore dispersal and low relative humidity (RH) displayed significant (P < 0.05) but negative correlation with conidial dispersal. The objective of the study was to modify microclimatic conditions of tomato crop canopy which may hamper conidial dispersal and reduce disease severity. We evaluated effect of marigold intercropping and plastic mulching singly and in consortia on A. solani conidial density, tomato leaf damage and microclimatic parameters as compar to tomato alone (T). Tomato-marigold intercropping-plastic mulching treatment (T + M + P) showed 35-39% reduction in disease intensity as compared to tomato alone. When intercropped with tomato, marigold served as barrier to conidial movement and plastic mulching prevented evapotranspiration and reduced the canopy RH that resulted in less germination of A. solani spores. Marigold intercropping and plastic mulching served successfully as physical barrier against conidial dissemination to diminish significantly the tomato foliar damage produced by A. solani.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.37-49
• /
• 2015

The goal of this research is to examine air temperature changes according to tree type, plantation type, roadside green area structure, and green volume of street green area within a city. The plantation type that could be analyzed for comparison by tree type with over 3 species was 1 rows of tree+shrubs. The results of analysis of average air temperature difference between pedestrian and car streets vis-a-vis 1 row of tree+shrub in high air temperature areas were: Pinus densiflora, $1.35^{\circ}C$; Zelkova serrata, $1.84^{\circ}C$; Ginkgo biloba, $2.00^{\circ}C$; Platanus occidentalis, $2.57^{\circ}C$. This standard large wide canopy species was analyzed by the roadside to provide shade to have a significant impact on air temperature reduction. In terms of analysis of the relationship between plantation type of roadside trees and air temperature, the average air temperature difference for 1 row of tree type was $1.80^{\circ}C$; for 2 rows of trees it was $2.15^{\circ}C$. In terms of analysis of the relationship between the roadside green area structure and air temperature, for tree type, average air temperature $1.94^{\circ}C$: for tree+shrub type, average air temperature $2.49^{\circ}C$; for tree+mid-size tree+shrub type, average air temperature $2.57^{\circ}C$. That is, air temperature reduction was more effective in a multi-layer structure than a single layer structure. In the relationship analysis of green volume and air temperature reduction, the air temperature reduction effect was enlarged as there was a large amount of green volume. There was a relationship with the green volume of the road, the size of the tree and number of tree layers and a multi-layer structured form of planting. The canopy volume was large and there were a great number of rows of the tree layer and the plantation type of multi-layer structure, which is what is meant through a relationship with the green volume along the roadside. Green composition standards for air temperature reduction effects and functional improvement were proposed based on the result. For a pedestrian street width of 3m or less in the field being ideal, deciduous broadleaf trees in which the canopy volume is small and the structure of the tree+shrub type through the greatest 1m green bend were proposed. For a pedestrian street width of over 3m, deciduous broadleaf trees in which the canopy volume is large and is multi-layer planted with green bend over 1m, tree+mid-size tree+shrub type was proposed.

• Atmosphere
• /
• v.29 no.4
• /
• pp.417-427
• /
• 2019

The purpose of this study is to build urban canopy model (Met Office Reading Urban Surface Exchange Scheme, MORUSES) based to Unified Model (UM) by using urban building information data in Seoul, and then to compare the improving urban canopy model simulation result with that of Seoul Automatic Weather Station (AWS) observation site data. UM-MORUSES is based on building information database in London, we performed a sensitivity experiment of UM-MOURSES model using urban building information database in Seoul. Geographic Information System (GIS) analysis of 1.5 km resolution Seoul building data is applied instead of London building information data. Frontal-area index and planar-area index of Seoul are used to calculate building height. The height of the highest building in Seoul is 40m, showing high in Yeoido-gu, Gangnam-gu and Jamsil-gu areas. The street aspect ratio is high in Gangnam-gu, and the repetition rate of buildings is lower in Eunpyeong-gu and Gangbuk-gu. UM-MORUSES model is improved to consider the building geometry parameter in Seoul. It is noticed that the Root Mean Square Error (RMSE) of wind speed is decreases from 0.8 to 0.6 m s^-1 by 25 number AWS in Seoul. The surface air temperature forecast tends to underestimate in pre-improvement model, while it is improved at night time by UM-MORUSES model. This study shows that the post-improvement UM-MORUSES model can provide detailed Seoul building information data and accurate surface air temperature and wind speed in urban region.

• Journal of the Korean earth science society
• /
• v.42 no.2
• /
• pp.135-148
• /
• 2021

The purpose of this study was to evaluate the urban heat island (UHI) intensity and the corresponding surface temperature forecast obtained using the local data assimilation and prediction system (LDAPS) of the Korea Meteorological Administration (KMA) against the AWS observation. The observed UHI intensity in Seoul increases during spring and winter, while it decreases during summer. It is found that the diurnal variability of the UHI intensity peaks at dawn but reaches a minimum in the afternoon. The LDAPS overestimates the UHI intensity in summer but underestimates it in winter. In particular, the model tends to overestimate the UHI intensity during the daytime in summer but underestimate it during the nighttime in winter. Moreover, surface temperature errors decrease in summer but increase in winter. The underestimation of the winter UHI intensity appears to be associated with weak forecasting of urban temperature in winter. However, the overestimated summer UHI intensity results from the underestimation of the suburban temperature forecast in summer. In order to improve the predictability of the UHI intensity, an urban canopy model (MORUSES) that considers urban effects was combined with LDAPS and used for simulation for the summer of 2017. The surface temperature forecast for the city was improved significantly by adopting MORUSES, and there were remarkable improvements in urban surface temperature morning forecasts. The urban canopy model produced an improvement effect that weakened the intensity of the UHI, which showed an overestimation during summer.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.04a
• /
• pp.127-128
• /
• 1998

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.268-275
• /
• 2017

The photosynthetic rates of crops depend on growth environment factors, such as light intensity and temperature, and their photosynthetic efficiencies vary with growth stage. The objective of this study was to compare two different models expressing canopy photosynthetic rates of romaine lettuce (Lactuca sativa L., cv. Asia Heuk romaine) using three variables of light intensity, temperature, and growth stage. The canopy photosynthetic rates of the plants were measured 4, 7, 14, 21, and 28 days after transplanting at closed acrylic chambers ($1.0{\times}0.8{\times}0.5m$) using light-emitting diodes, in which indoor temperature and light intensity were designed to change from 19 to $28^{\circ}C$ and 50 to $500{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. At an initial $CO_2$ concentration of $2,000{\mu}mol{\cdot}mol^{-1}$, the canopy photosynthetic rate began to be calculated with $CO_2$ decrement over time. A simple multiplication model expressed by simply multiplying three single-variable models and a modified rectangular hyperbola model were compared. The modified rectangular hyperbola model additionally included photochemical efficiency, carboxylation conductance, and dark respiration which vary with temperature and growth stage. In validation, $R^2$ value was 0.849 in the simple multiplication model, while it increased to 0.861 in the modified rectangular hyperbola model. It was found that the modified rectangular hyperbola model was more suitable than the simple multiplication model in expressing the canopy photosynthetic rates affected by environmental factors (light Intensity and temperature) and growth factor (growth stage) in plant factory modules.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.239-245
• /
• 2018

Comparative drought resistances of 11 perennial warm-season turfgrasses were evaluated in the field after withholding irrigation for 48 days in summer I and 57 days in summer II. There were significant variations among the grasses in their drought resistances. From two years study of field shoot recovery from drought stress, the relative rankings among the 11 warm-season turfgrasses was as follows. 'Arizona Common' and 'Texturf 10' bermudagrasses [Cynodon dactylon (L.) Pers.], 'Tifgreen' hybrid bermudagrass [C. dactylon (L.) Pers. ${\times}$ C. transvaalensis Davy], and 'Georgia Common' centipedegrass [Eremochloa ophiuroides (Munro.) Mack.] possessed good drought resistances, whereas 'Texas Common' St. Augustinegrass [Stenotaphrum secundatum (Walt.) Kuntze] and 'Tifway' hybrid bermudagrass [Cyndon dactylon (L.) Pers ${\times}$ C. transvaalensis Davy] possessed poor drought resistances. 'Texas Common' buffalograss [Buchloe dactyloides (Nutt.) Engelm.], 'Pensacola' bahiagrass (Paspalum notatum Flugge.), and 'Adalayd' seashore paspalum (Paspalum vaginatum Swartz), 'Meyer' zoysiagrass (Zoysia japonica Steud.), 'Emerald' zoysiagrass (Z. japonica Steud. ${\times}$ Z. tenuifolia Willd. ex Trin.) were found to rank intermediate. Visual leaf firing showed the highest correlation (r=-0.84) to shoot recovery from drought stress. Visual leaf rolling (r=-0.59) and canopy-air temperature differential (r=-0.64) also showed very significant correlations, whereas leaf water potential (r=0.54) showed relatively lower correlation.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2019.08a
• /
• pp.262-263
• /
• 2019

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.6
• /
• pp.103-112
• /
• 2001

The development of infrared thermometry has led many researchers to use plant temperatures, and specifically the temperature of the crop canopy in the field, for estimating the water stress of a crop. The purpose of this study was to evaluate the role of leaf temperature in irrigation scheduling. An experiment was carried out in a greenhouse with chinese cabbage. Leaf temperature was measured with infrared thermometry and evapotranspiration of the crop was measured by lysimeters. Influence of the difference between leaf temperature and air temperature on crop evapotranspiration was evaluated under varying water stress condition. A further objective was to evaluate the effect of other climatic variables on the relationship between evapotranspiration and temperature difference between leaf and air. A statistical model for estimating evapotranspiration using the temperature difference, relative humidity. and radiation was developed and tested. Crop water stress index was calculated using vapour pressure deficit and the temperature difference. Relations between the crop water stress index and crop evapotranspiration was tested. The index was closely related with evapotranspiration.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.221-229
• /
• 2022

This study was aimed to investigate spatial and vertical characteristics of greenhouse environments according to the location of the environmental sensors, and to investigate the correlations between temperature, light intensity, and carbon dioxide (CO₂) concentration according to the type of greenhouse. Temperature, relative humidity (RH), CO₂, and light sensors were installed in the four-different vertical positions of the whole canopy as well as ground and roof space at the five spatial locations of the Venlo greenhouse. Also, correlations between temperature, light intensity, and CO₂ concentration in Venlo and semi-closed greenhouses were analyzed using the Curve Expert Professional program. The deviations among the spatial locations were larger in the CO₂ concentration than other environmental factors in the Venlo greenhouse. The average CO₂ concentration ranged from 465 to 761 µmol·mol^-1 with the highest value (646 µmol·mol^-1) at the Middle End (4ME) close to the main pipe (50Ø) of the liquefied CO₂ gas supply and lowest (436 µmol·mol^-1) at the Left Middle (5LM). The deviation among the vertical positions was greater in temperature and relative humidity than other environments. The time zone with the largest deviation in average temperature was 2 p.m. with the highest temperature (26.51℃) at the Upper Air (UA) and the lowest temperature (25.62℃) at the Lower Canopy (LC). The time zone with the largest deviation in average RH was 1 p.m. with the highest RH (76.90%) at the LC and the lowest RH (71.74%) at the UA. The highest average CO₂ concentration at each hour was Roof Air (RF) and Ground (GD). The coefficient of correlations between temperature, light intensity, and CO₂ concentration were 0.07 for semi-closed greenhouse and 0.66 for Venlo greenhouse. All the results indicate that while the CO₂ concentration in the greenhouse needs to be analyzed in the spatial locations, temperature and humidity needs to be analyzed in the vertical positions of canopy. The target CO₂ fertilization concentration for the semi-closed greenhouse with low ventilation rate should be different from that of general greenhouses.