• 소성∙가공
• /
• 제9권6호
• /
• pp.631-637
• /
• 2000

The tube hydroforming technology is new key production technologies, which contribute to a light-weight cu. Because the tubes are used for hydroforming instead of the sheet materials formability test for tube is required to measure the formability of materials for hydroforming. In this Paper, a kind of formability test for tube, which can well represent the characteristics of tube hydroforming processes, is developed. Developed formability test method can consider not oかy the influence of material Properties but also contact with die and material. Some investigation was carried out to verify the effectiveness of developed formability test.

• 한국주거학회논문집
• /
• 제21권4호
• /
• pp.71-79
• /
• 2010

This study is a fundamental research which suggests some standards that can be used in selecting some advanced materials to be applied in housing space designs. The following conclusions have been drawn from the study. First, it has been discovered that as the residents' quality of life improved, the finishing materials emerged as an important element of housing spaces. It could also be seen that among the finishing materials used in housing spaces, there is recently a growing trend towards various environmentally-friendly advanced materials under the theme of 'the nature' and 'health'. As a result, the need to investigate the standards of discriminatory and efficient housing space designs using advanced materials is on the increase. Second, through the literature and precedent studies, the physical criteria of advanced materials have been classified into five categories: new technology, new manufacturing methods, new materials, complementation and applicability. The main criteria of advanced finishing materials for housing spaces have been classified into four main categories: durability, functionality, economical efficiency and sensibility. By collecting and classifying some key words according to each of these four categories, the representative or combinable features have been extracted. By organizing the advanced materials' physical criteria and their details, some standards based on the physical aspects have been suggested. The features of the finishing materials in consideration of advanced materials have been reclassified into the user-based criteria, environmental criteria and spatial criteria. Through this method, the criteria have been brought up from a new viewpoint, establishing the standards for the advanced materials applicable to housing spaces. Finally, after assessing the criteria by analyzing the advanced materials currently known to be applicable in housing spaces, it has been concluded that the criteria can be used as the fundamental standards. As this study is based on investigating the literature and data, it may be less than reasonable to generalize from the limited number of examples. Hence, it shall be important to make a profound study of some detailed criteria by suggesting more objective standards and analyzing a greater variety of advanced materials.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.243-249
• /
• 2023

Urea oxidation reaction (UOR) via electrochemical oxidation process can replace oxygen evolution reaction (OER) for green hydrogen production since UOR has lower thermodynamic potential (0.37 V_RHE) than that of OER (1.23 V_RHE). However, in the case of UOR, 6 electrons are required for the entire UOR. For this reason, the reaction rate is slower than OER, which requires 4 electrons. In addition, it is an important challenge to develop catalysts in which both oxidation reactions (UOR and OER) are active since the active sites of OER and UOR are opposite to each other. We prove that among the NiFe₂O₄ nanoparticles synthesized by the hydrothermal method at various synthesis temperatures, NiFe₂O₄ nanoparticle with properly controlled particle size and crystallinity can actively operate OER and UOR at the same time.

• 한국학교수학회논문집
• /
• 제3권2호
• /
• pp.155-164
• /
• 2000

The future society will demand that enables one to solve in many fields by connecting various informations in many fields and then creating his own information. In the coming society, creativeness will be regarded much important. This ability can be developed with materials through group activities experimental class in math classes. This classes using these materials are not teacher-oriented, explanatory classes but student-oriented ones. They offer students opportunities to think by themselves and expand their potential abilities. They are suitable for rising and keeping student's interests. Therefore experimental classes through group activities enable students to think mathematically and make them recognize the importance of mathematical approach by letting them work connecting other subjects or things in real life. They can develop not only expressive, communicative ability and cooperative spirit, but also the ability to transcend the class itself and then reorganize facts in new insights. Besides, math classes with experiments can arouse student's curiosity familiarizing them with mathematics. Moreover, they can expand student's originative and problem-solving abilities.

• Agricultural and Biosystems Engineering
• /
• 제5권2호
• /
• pp.50-54
• /
• 2004

The study aimed to develop a mechanized mushroom growing system for the substrate materials mixing and wetting, materials fermentation and pasteurisation through the design of integrated cultivation machine system for oyster mushroom. The power requirement of the prototype during fermentation operation was measured in the range of 31$\~$33 kg-m and the torque has not so much differ by the kinds and quantity of materials. The work efficiency of conventional method for stacking the heap and turning the heap of cotton waste by tractor rotavator and manual wetting required 78 hours. But the watering, fermentation and sterilisation by the prototype use same operation required 25.5 hours, which can save the operation labour by $67\%$. The machine can be saved the requirement of heating energy by $63\%$, and the machine can also be saved the material cost by $44\%$. It is envisaged that the machine can effectively be used for large mushroom growing farms or joint use mushroom growing group-farmers in a village.

• 한국광학회지
• /
• 제2권2호
• /
• pp.108-113
• /
• 1991

This paper describes the necessity and utility of Langmuir-Blodgett (L-B) methods in developing molecular electronic devices. It also covers the application area and limitations of the methods. With L-B methods, the membrane thickness can be controlled in a range of 50 nm and 1000 nm depending on nature of the materials and layering methods. The molecular arrangement within the membrane can be altered by altering the surface pressure and nature of the layering materials. Such a variation can be altered by altering the surface pressure and nature of the layering materials. Such a variation can offer a new application of the methods to the future electronic devices. More over 2nd and 3rd nonlinearity generated in the nonsymmetric thin membrane will be used in the development of the optoelectronic devices.

• 소성∙가공
• /
• 제8권4호
• /
• pp.374-383
• /
• 1999

To determine the flow stress of semi-solid materials, a new combined method has been studied by experimental and analytic technique in the current approach. Using backward extrusion experiment and its numerical analysis, the characterization scheme of semi-solid materials according to the change of initial solid volume fraction has been proposed. Because that solid volume fraction is sensitive to temperature change, it is required to precisely control the temperature setting. Model materials can guarantee the establishment of material characterization technique from the noise due to temperature change. Thus, clay mixed with bonded abrasives was used for experiment and the change of initial solid fraction was copied out through the variation of mixing ratio. Upper bound method was adapted to increase in efficiency of the calculation in numerical analysis and new kinematically admissible velocity field was employed to improve the accuracy of numerical solution. It is thought that the material characterization scheme proposed in this study can be applied to not only semi-solid materials, but also other materials that is difficult to obtain the simple stress state.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.651-656
• /
• 2012

A study on capacitive characteristics of stylus pen for touch panel are progressed in this paper. Also the main factors for capacitive sensitivity are studied. Namely, highly sensitive stylus pen which can be applied to capacitive touch panel are studied based on the analysis of materials and process conditions regardless of pattern shapes. Stylus pen was made of PDMS(Poly-Di-Methyl-Siloxane) and conductive metal powders which does not damage the touch panel surface. We tried to get the advantages of both the properties of soft PDMS and conductive metal powders. We found that potential difference of capacitance change with conductivity of the composite materials(PDMS + metal powders) it implies that during touch process, large voltage difference can be caused by the high conductive materials of stylus pen. Stylus pen made by PDMS with mixed with Ag powders which has large conductivity shows more capacitance change of 1 pF than PDMS with other materials of Ni or C powders.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.23-27
• /
• 2015

Recently, the use of ion-exchange strengthened glass has increased sharply, as it is now used as the cover glass for smart phone devices. Therefore, many researchers are focusing on methods that can be used to strengthen ion-exchange glass. However, research on how the improved strength can be maintained under thermal environment of device manufacturing is still insufficient. We tested the degradation of the characteristics of ion-exchange soda-lime glass samples, including their surface compressive stress characteristics, the depth of the ion-exchange layer (DOL), flexural strength, hardness, and modulus of rupture (MOR) values. Degradation of the characteristics of the ion-exchange glass samples occurred when they were heat-treated at a temperature that exceeded $350^{\circ}C$.

• Composites Research
• /
• 제16권5호
• /
• pp.39-44
• /
• 2003

복합재료에 삽입된 점탄성 재료는 복합재구조물의 감쇠물성을 크게 증가시킨다. 일반적으로 점탄성 재료는 등방성이므로 모든 방향의 감쇠물성이 동일하다. 최근 재료의 방향에 따라 감쇠물성이 변하는 이방성 감쇠재료의 개발이 요구되고 있다. 이방성 감쇠재료는 점탄성 재료 내부에 얇은 섬유를 삽입하여 제작한다. 삽입된 섬유는 댐핑재료의 강성에 큰 영향을 주며 강성은 고전 적층판 이론을 따르게 된다. 본 논문에서는 Ni와 Adams의 이론을 이용하여 손실계수를 평가하였다. 그리고 방향성 있는 감쇠재료의 영향을 평가하기 위해 저속충격 거동해석을 수행하였다. 해석결과로부터 방향성 있는 감쇠재료는 복합적층판의 진동 및 감쇠특성에 큰 영향을 줌을 보였다