• 대한화학회지
• /
• 제62권2호
• /
• pp.93-98
• /
• 2018

Bis-GMA, TEGDMA, and camphorquinone were used as the main material, cross-linking agent, and photoinitiator, respectively. In addition, 2-isocyanatoethyl methacrylate was used as an additive for high strength, while the 3-hydroxypyridine was used as an additive for antibacterial activity. Photopolymerization was also carried out at a 440-480 nm wavelength and at about $1000mW/cm^2$ intensity for about 40 seconds. The breaking strength measurement of the samples showed that the breaking strength increased along with increasing the addition ratio of IEM, while it took less time until the polymerization was complete, thereby suggesting that the degree of polymerization has the tendency to increase. And also, compared to the size of the clear zone formed by ampicillin, the 3-hydroxypyridine group exhibited antimicrobial activity induced by ampicillin. The results of this study suggest that the use of 2-isocyanatoethyl methacrylate as an additive for high strength and 3-hydroxypyridine as an additive for improved antibacterial activity would improve the usability of the fabricated polymer as a dental resin cement material with high functionality.

• 치위생과학회지
• /
• 제8권3호
• /
• pp.109-115
• /
• 2008

치과용 가시광선 중합형 복합수지의 광중합효율을 높이기 위해 2종의 새로운 액체형 amine 개시제인 MA, MPT와 현재 가장 많이 사용되고 있는 개시제인 AEM을 CQ, PD, DA에 각각 첨가하고 UDMA의 광중합효율을 알아본 결과 다음과 같은 결론을 얻었다. 1. 조사시간이 증가됨에 따라 amine 개시제의 종류에 관계없이 광중합효율이 점차 증가되었으며, 약 60초까지 조사였을 때에는 광중합효율이 급격히 증가되었으나 그 이상 조사하여도 광중합효율이 크게 증가되지 않았다. 2. AEM, MA와 MPT를 사용하였을 경우 모두 CQ > PD > DA의 순으로 광중합효율이 우수하게 나타났으나 AEM을 사용하였을 때 PD와 CQ는 큰 차이를 보이지 않았다. 3. CQ의 광중합효율은 새로운 광개시제인 MA와 MPT를 사용하였을 때가 범용으로 사용되고 있는 amine 개시제인 AEM을 사용하였을 경우보다 중합효율이 증가하는 결과를 보였다. 4. PD의 광중합효율은 MA와 함께 사용하였을 경우가 가장 높게 나타났으나 AEM의 경우와 큰 차이를 보이지는 않았다. 5. 이상의 결과로부터 MA와 CQ 및 PD를 함께 사용한 새로운 광중합시스템이 광중합효율을 높이는데 효율적인 것을 알 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제6권5호
• /
• pp.333-345
• /
• 2014

PURPOSE. Bonding agents (BA) are the crucial weak link of composite restorations. Since the commercial materials' compositions are not disclosed, studies to formulize the optimum ratios of different components are of value. The aim of this study was to find a proper formula of BAs. MATERIALS AND METHODS. This explorative experimental in vitro study was composed of 4 different sets of extensive experiments. A commercial BA and 7 experimental formulas were compared in terms of degree of conversion (5 experimental formulas), shear bond strength, mode of failure, and microleakage (3 experimental formulas). Statistical analyses were performed (${\alpha}$=.05). The DC of selected formula was tested one year later. RESULTS. The two-way ANOVA indicated a significant difference between the shear bond strength (SBS) of two tissues (dentin vs. enamel, P=.0001) in a way that dentinal bonds were weaker. However, there was no difference between the four materials (P=.283). The adhesive mode of failure was predominant in all groups. No differences between the microleakage of the four materials at occlusal (P=.788) or gingival (P=.508) sites were detected (Kruskal-Wallis). The Mann-Whitney U test showed a significant difference between the microleakage of all materials (3 experimental formulas and a commercial material) together at the occlusal site versus the gingival site (P=.041). CONCLUSION. A formula with 62% bisphenol A-glycidyl methacrylate (Bis-GMA), 37% hydroxy ethyl methacrylate (HEMA), 0.3% camphorquinone (CQ), and 0.7% dimethyl-para-toluidine (DMPT) seems a proper formula for mass production. The microleakage and SBS might be respectively higher and lower on dentin compared to enamel.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.291-297
• /
• 2011

Purpose: The purpose of this study was to know the availability of three photosensitizers, CQ, PD, DA, as a photosensitizer of dental resin composite. We want to know abortion band around visible light region for the using potential possibility as a photosensitizer for visible light cured dental composite resin. And I studied to know the relative photodecomposition ratio of three photosensitizers with or without photoinitiator, DAEM. Methods: The photodecomposition of three photosensitizers were studied by UV absorption spectroscopy in ethanol and determined by same instrument with irradiation time for relative photodecomposition. In order to study the effect of amine on photodecomposition was added the DAEM in the photosensitizer solution and the relative rate was measured by the same procedure with aove mentioned. Results: The all of three photosensitizers are absorbed around visible light region. The relative rate of decrease in absorbance incereased in the order: CQ < BD < PD. The effect of DAEM on the photodecomposition of the photosensitizers was appeared different results without DAEM. The photodecomposition rate of PD and DA decreased somewhat with the addition of amine, while that of CQ increased. The rtealtive photodecomposition rate increased in the oprder: BD ${\leq}$ CQ < PD with the addition of amine, but the differnce was not significant. Conclusion: PD and DA like CQ gives to the possibility of use as a photosensitizer for visible light cured dental composite resin by absorption around visible light region and photodecomposition in the maximum absorption wavelength. And it is showed that PD and DA are not effective decomposed with amine initiator, DAEM but CQ decomposed with DAEM effectively. This result may be due to a different mechanism operating for the decomposition of photosensitizers in the presence of amine.

• 치위생과학회지
• /
• 제9권2호
• /
• pp.189-195
• /
• 2009

치과용 가시광선 종합형 복합수지의 광중합효율을 높이기 위해 합성한 bis-GMA 레진에 2종의 새로운 광중감제인 PD, DA를 넣고 현재 가장 많이 사용되고 있는 광중감제인 CQ와 조사시간 및 광중감제의 양을 증가시키며 광중합효율을 비교한 결과 다음과 간은 결론을 얻었다. 1. Bis-GMA의 합성여부를 적외선 흡수 분광법, 핵자기공명 흡수법 등 분광학적인 방법으로 확인하였으며 핵자기 공명 흡수법으로 확인한 결과 이성질체가 존재함을 알 수 있었다. 2. 조사시간이 증가됨에 따라 광중감제의 종류에 관계없이 광중합효율이 점차 증가되었으며, 약 60초까지 조사였을 때에는 광중합효율이 급격히 증가되었으나 그 이상 조사하여도 광중합효율이 크게 증가되지 않았다. 3. 같은 시간 조사하였을 경우 대체적으로 광중합효율이 증가되었으나 CQ와 DA의 경우는 3.0 mol% 첨가하였을 때에 비해 6.0 mol% 첨가되었을 때의 광중합효율이 오히려 더 낮게 나타나는 양상을 보였다. 4. 같은 시간동안 조사하고, 같은 양의 광중감제를 첨가하였을 경우 DA < CQ < PD 순으로 광중합효율이 높게 나타나서 CQ에 비해 PD를 첨가하였을 때의 광중합효율이 높게 나타났다. 5. 이상의 결과로부터 PD가 CQ를 대체할 수 있는 효율이 좋은 새로운 광중감제로서 사용될 가능성을 보여주었다.

• 대한소아치과학회지
• /
• 제31권2호
• /
• pp.247-255
• /
• 2004

이전의 연구에서 레진 재료를 포함한 여러 수복재료에서의 유출물이 우식 유발 세균의 성장에 영향을 줄 수 있다는 보고가 있었다. 이번 연구의 목적은 대표적인 우식 유발 세균인 Streptococcus mutans와 Streptococcus sobrinus의 성장에 대하여 레진을 구성하는 모노머들(Bis-GMA, TEGDMA, EGDMA, UDMA, HEMA, Camphoroquinone)이 어떠한 영향을 줄 수 있는지에 대하여 알아보고자 하는 것이다. 결과는 다음과 같다. 1. S. mutans와 S. sobrinus의 성장률은 6가지 레진 모노머 모두에서 0.03 mmol/L의 농도에 서 유의할만하게 감소되었다. 2. S. mutars의 성장률은 0.01 mmol/L 농도의 UDMA와 0.005mmol/L, 0.01 mmol/L 농도의 Camphoroquinone에서 대조군에 비하여 유의 할만하게 감소되었다. 3. S. sobrinus의 성장률은 0.01 mmol/L 농도의 HEMA, UDMA와 0.005 mnol/L, 0.01 mmol/L 농도의 Camphoroquinone에서 대조군에 비하여 유의할만하게 감소되었다. 4. S. sobrinus의 성장률은 0.001, 0.01, 0.03 mmol/L농도에서 대조군에 비하여 유의할만한 감소를 보였으며 각 실험군들 간에도 통계학적으로 유의 할만한 차이를 보였다. 이상의 결과를 종합하면 레진 모노머를 적용한 모든 군에서 적용하지 않은 양성 대조군에 비해 두세균의 증식률이 감소되었으며, 세균의 성장을 촉진하지 않는 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제37권2호
• /
• pp.96-103
• /
• 2012

Objectives: This study evaluated the effect of camphorquinone (CQ)-amine ratio on the C=C double bond conversion of resins with binary and ternary photoinitiation systems. Materials and Methods: Two monomer mixtures (37.5 Bis-GMA/37.5 Bis- EMA/25 TEGDMA) with binary systems (CQ/DMAEMA in weight ratio, group A [0.5/1.0] and B [1.0/0.5]) and four mixtures with ternary system (CQ/OPPI/DMAEMA, group C [0.1/1.0/0.1], D [0.1/1.0/ 0.2], E [0.2/1.0/0.1] and F [0.2/1.0/0.2]) were tested: 1 : 2 or 2 : 1 CQ-amine ratio in binary system, while 1 : 1 ratio was added in ternary system. The monomer mixture was cured for 5, 20, 40, and 300 sec with a Demetron 400 curing unit (Demetron). After each exposure time, degree of conversion (DC) was estimated using Fourier transform infrared (FTIR) spectrophotometer (Nicolet 520, Nicolet Instrument Corp.). The results were analyzed by ANOVA followed by Scheffe test, with p = 0.05 as the level of significance. Results: DC (%) was expressed in the order of curing time (5, 20, 40, and 300 sec). Group A ($14.63{\pm}10.42$, $25.23{\pm}6.32$, $51.62{\pm}2.69$, $68.52{\pm}2.77$); Group B ($4.04{\pm}6.23$, $16.56{\pm}3.38$, $37.95{\pm}2.79$, $64.48{\pm}1.21$); Group C ($16.87{\pm}5.72$, $55.47{\pm}2.75$, $60.83{\pm}2.07$, $68.32{\pm}3.31$); Group D ($23.77{\pm}1.64$, $61.05{\pm}1.82$, $65.13{\pm}2.09$, $71.87{\pm}1.17$); Group E ($28.66{\pm}2.92$, $56.68{\pm}1.33$, $60.66{\pm}1.17$, $68.78{\pm}1.30$); Group F ($39.74{\pm}6.31$, $61.07{\pm}2.58$, $64.22{\pm}2.29$, $69.94{\pm}2.15$). Conclusion: All the monomers with ternary photoinitiation system showed higher DC than the ones with binary system, until 40 sec. Concerning about the effect of CQ-amine ratio on the DC, group A converted into polymer more than group B in binary system. However, there was no significant difference among groups with ternary system, except group C when cured for 5 sec only.