• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.338-341
• /
• 2005

This paper proposes a control system for a Galvano meter which can be used in angle multiplexing for a holographic data storage. Due to the small angle multiplexing selectivity and the exposure/delay time of a CCD camera, the system needs to be controlled to satisfy the performance specification. First, the mathematical model is derived by combining the electrical and mechanical dynamic equations. Then, the obtained model was tuned by the experiments. Finally, a PID controller using DSP was designed and was applied the holographic system. From this approach, we successfully meet the performance specification.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.675-680
• /
• 2008

This paper proposes a way to measure the displacement of a multi-point by using a pattern recognition from video signal. Generally in measuring displacement, gab sensor, which is a displacement sensor, is used. However, it is difficult to measure displacement by using a common sensor in places where it is unsuitable to attach a sensor, such as high-temperature areas or radioactive places. In this kind of places, non-contact methods should be used to measure displacement and in this study, images of CCD camera were used. When displacement is measure by using camera images, it is possible to measure displacement with a non-contact method. It is simple to install and multi-point displacement measuring device so that it is advantageous to solve problems of spatial constraints.

• 한국기계가공학회지
• /
• 제9권2호
• /
• pp.20-25
• /
• 2010

A camera module is supported by a gimbal structure in collection equipment of image information. During flight, the gimbal system undergoes serious accelerations with wide frequencies. To get the correct images, the camera module must be stably vibrated under these conditions. If natural frequency unfortunately exists in a exciting frequency range, resonance occurs there. Hence, harmonic responses analysis is needed to know correct vibration characteristic of the gimbal system. Finite element analysis was performed to get an acceleration of the gimbal system by mode superposition after extracting mode shapes and natural frequencies. Considering damping ratio of 2%, the reponses of gimbal structure were calculated from excitations with a design frequency band. As results, a maximum acceleration transmissibility, which is the ratio of response to excitation, was obtained and it can be used to design the gimbal structure effectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.637-640
• /
• 2008

Noise generated from maglev vehicles mainly consists of two components, one is due to mechanical noise and the other due to aerodynamic noise. The former is due to the vehicle-guideway interactions and the latter results from the unsteady air flow around the vehicle. Aerodynamic noise could become more predominant around 225 km/h for maglev vehicles. In this paper, the aerodynamic noise of maglev vehicles is investigated experimentally. The results of the wind tunnel experiments of maglev vehicle models are introduced and compared. The comparison shows that the position of the main noise is between the bottom of the vehicle model and the rail. It is also found that the emitted sound pressure level is related to the gap size between the vehicle bottom and the rail.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.136-141
• /
• 2011

In a power plant, an oil and steam leakage is generated once in a while. This is because the operating temperature and pressure of oil are very high. It is very difficult to monitor oil leakage, because oil leakage is almost invisible. Therefore a method to oil leakage detecting quickly and accurately is needs. In this paper, we proposed the method for the detecting oil leakage by using image processing and CCTV. To test the performance of this technique, experiments have been performed for simple case. Results show that the proposed technique is quite powerful in the oil leak detection.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.868-869
• /
• 2014

고속도로 주변에 공동주택이 건설되면서 도로소음에 의한 민원이 크게 증가하고 있다. 이러한 민원에 대한 소음대책 방법으로 방음벽이 주로 사용되고 있지만, 공동주택이 고층화 되어감에 따라 방음벽만으로는 대책이 어려운 경우가 자주 발생하고 있다. 이에 따라, 최근에는 방음터널, 저소음포장, 과속 단속카메라 등이 소음대책 방법으로 제안되고 있고, 본 연구에서는 과속 단속카메라의 소음저감효과에 대해 분석하고 평가하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.569-572
• /
• 2005

In many machines handling lightweight and flexible media, such as automated teller machines(ATM) and printers etc., the media must transit an open space. In the paper feeding mechanism, it is important to feed the sheet without jamming under any conditions. To avoid sheet jamming, first we need to predict the behavior of the sheet exactly. The nonlinear theory of the dynamic elastica has often been used to a nonlinear dynamic deflection model. In this paper, the governing equation is derived and simulated by the finite difference method. The analysis has to include aerodynamic effect for more exact behavior analysis. For verification of the numerical simulation, the experiments were performed using high-speed camera and feeding mechanism. The experimental results show good agreement with the numerical simulations.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.329-333
• /
• 2005

This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we propose the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The current resolution of the vibration measurement is limited to sub centimeter scale. However, the frequency bandwidth and resolution can be enhanced by a high-speed and high-resolution image processing system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.325-326
• /
• 2009

• Composites Research
• /
• 제24권2호
• /
• pp.14-21
• /
• 2011

본 논문에서는 항공기에 장착되는 다축 구동 광학계에 대한 동역학 모델링을 하고, 다물체 동역학 해석프로그램을 사용하여 다축 구동 광학계의 모드해석, 사인파 해석 및 랜덤 진통해석을 하였다. 카메라 모듈의 물성으로는 Al6061-T6와 두 가지 형태의 강화 복합재 물성을 적용하였으며, x, y, z 축의 가진에 따른 각 축의 응답을 구하여 서로 비교하였다. 해석 결과는 카메라 모듈의 경량화를 위해 사용될 수 있을 것으로 사료된다.