• Korean Journal of Computational Design and Engineering
• /
• v.11 no.5
• /
• pp.344-350
• /
• 2006

A method for extracting material information on sheet metal parts from an assembly model is proposed. In order to estimate the cost and order the required sheet metals, their outline profiles, thicknesses, quantities, and etc. are needed. The proposed method consists of two steps: First, sheet metal parts are selected through a feature recognition process from an assembly model. Then, some geometric information for the parts is calculated. In the later step a flattening process of bent parts is included. The method is implemented on a commercial CAD/CAM system Unigraphics with API routines and applied to steam turbine generators and large scale boilers.

• Computers and Concrete
• /
• v.30 no.3
• /
• pp.209-224
• /
• 2022

In this paper, the artificial neural network (ANN) is employed to predict the flexural behavior of reinforced concrete (RC) beams retrofitted with carbon fiber/epoxy composites modified by carbon nanotubes (CNTs). Multiple techniques are used to improve the accuracy of the ANN prediction, as the data represents a multivalued function. These techniques include static ANN modeling, ANN modeling with load history, and ANN modeling with double load history. The developed ANN models are used to predict the load-displacement profiles of beams retrofitted with either CFRP or CNTs modified CFRP, flexural capacity, and maximum displacement of the beams. The results demonstrate that the ANN is able to predict the flexural behavior of the retrofitted RC beams as well as the effect of each parameter including the type of the used epoxy and the presence of the CNTs.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.62.2-62.2
• /
• 2020

Globular clusters(GCs) are found not only around galaxies (galaxy GCs), but also between galaxies in galaxy clusters (intracluster GCs; ICGCs). The ICGCs, which are not bound to any of cluster member galaxies, are governed by the galaxy clutster potential. ICGCs have been detected in the wide field of Virgo and Fornax galaxy clusters. However, previous surveys covered only a small fraction of Coma and Perseus. In this study we present a wide field survey of these two galaxy clusters, using Subaru Hyper Suprime-Cam(HSC) archival images, covering a circular field with diameter of ~1.8 deg. We select ICGC candidates, by masking the images of bright galaxies and choosing point sources in the remaining area. We find thousands of ICGCs in each galaxy cluster. These ICGCs show a bimodal color distribution, which is dominated by blue GCs. We investigate spatial distributions and radial number density profiles of the blue and red ICGCs in each galaxy cluster. Implications of the results will be discussed.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2007

Purpose: Human adipose tissue-derived stromal cells(hADSCs) can be expanded in vitro and induced to differentiate into multiple mesenchymal cell types. In this study we have examined various neuronal phenotypes and gene expression profiles of the hADSCs in the neuronal induction. Methods: The hADSCs were isolated from human adipose tissue and they were characterized by the flow cytometry analysis using CD13, CD29, CD34, CD45, CD49d, CD90, CD105 and HLA-DR cell surface markers. We differentiated the hADSCs into the neuronal lineage by using chemical induction medium and observed the cells with contrast microscopy. The immunocytochemistry and western blotting were performed using the NSE, NeuN, Trk-A, Vimentin, N-CAM, S-100 and ${\beta}$-Tubulin III antibodies. Results: The hADSCs were positive for CD13($90.3{\pm}4%$), CD29($98.9{\pm}0.7%$), CD49d($13.6{\pm}6%$), CD90 ($99.4{\pm}0.1%$), CD105($96%{\pm}2.8%$) but negative for CD34, CD45 and HLA-DR. The untreated cultures of hADSCs predominately consisted of spindle shaped cells and a few large, flat cells. Three hours after the addition of induction medium, the hADSCs had changed morphology and adopted neuronal-like phenotypes. The result of immunocytochemistry and western blotting showed that NSE, NeuN, Trk-A, Vimentin, N-CAM, S-100 and ${\beta}$-Tubulin III were expressed. However, NSE, NeuN, Vimentin were weakly expressed in the control. Conclusion: Theses results indicate that hADSCs have the capabillity of differentiating into neuronal lineage in a specialized culture medium. hADSCs may be useful in the treatment of a wide variety of neurological disorders.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.4
• /
• pp.489-493
• /
• 2008

In 2004, Jorgensen and coworkers proposed the MUC4 gene as a candidate gene of enterotoxigenic Escherichia coli (ETEC) F4ab/ac receptor in piglets and a mutation of $G{\rightarrow}C$ in intron 7 of MUC4 was identified to be associated with the ETEC F4ab/ac adhesion phenotypes. In this study, we used 310 piglets of three breeds (Landrace, Large White and Chinese Songliao Black) to analyze the relationship between this mutation and the F4ab/ac adhesion phenotype. The results show that the genotypes at this site and the ETEC F4ab/ac adhesion phenotypes were not completely consistent, although they are very strongly associated. Among the individuals with genotype CC, which was identified as a resistant genotype to F4ab/ac adhesion, only 72.1% (124/172) were non-adhesive to ETEC F4ab and 77.9% (134/172) were non-adhesive to ETEC F4ac infections. This suggests that this mutation may not be the causative mutation for ETEC F4ab/ac adhesion, rather, the actual causative mutation may be in another gene closely linked to MUC4, or at aother site within the MUC4 gene. Our results also suggest that the receptors of F4ab and F4ac may be determined by two different but closely linked loci. In order to screen other genes related to F4ab/ac adhesion in piglets, the mRNA profiles from six full sib piglets, of which three were adhesive to ETEC F4ab/ac and three non-adhesive, were analyzed by suppression subtractive hybridization (SSH). One up-regulated gene, Ep-CAM, was selected for further analysis based on its role in the intestinal epithelial cells adhesion. Using real-time RT-PCR, we found that the Ep-CAM gene was significantly up-regulated in the piglets adhesive to F4ab/ac. It was mapped to SSC3q11-q14 by radiation hybrid mapping.

• Geomechanics and Engineering
• /
• v.8 no.2
• /
• pp.187-220
• /
• 2015

Soil disturbance induced by installation of mandrel driven vertical drains decreases the in situ horizontal hydraulic conductivity of the soil in the vicinity of the drains, decelerating the consolidation rate. According to available literature, several different profiles for the hydraulic conductivity variation with the radial distance from the vertical drain, influencing the excess pore water pressure dissipation rate, have been identified. In addition, it is well known that the visco-plastic properties of the soil also influence the excess pore water pressure dissipation rate and consequently the settlement rate. In this study, a numerical solution adopting an elastic visco-plastic model with nonlinear creep function incorporated in the consolidation equations has been developed to investigate the effects of disturbed zone properties on the time dependent behaviour of soft soil deposits improved with vertical drains and preloading. The employed elastic visco-plastic model is based on the framework of the modified Cam-Clay model capturing soil creep during excess pore water pressure dissipation. Besides, nonlinear variations of creep coefficient with stress and time and permeability variations during the consolidation process are considered. The predicted results have been compared with V$\ddot{a}$sby test fill measurements. According to the results, different variations of the hydraulic conductivity profile in the disturbed zone result in varying excess pore water pressure dissipation rate and consequently varying the effective vertical stresses in the soil profile. Thus, the creep coefficient and the creep strain limit are notably influenced resulting in significant changes in the predicted settlement rate.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.171-179
• /
• 2002

It is well known that the geometry of the articular surface plays a major role in the kinematic and kinetic analysis to understand human knee joint function during motion. The functionality of the knee joint cannot be accurately modeled without considering the effects of sliding and lolling motions. We Present a 3-D human knee joint model considering sliding and rotting motion and major ligaments. We employ more realistic articular geometry using two cam profiles obtained from the extrusion of the sagittal Plain view of the representative Computerized Tomography image of the knee joint compared to the previously reported model. Our model shows good agreement with the already reported experimental results on Prediction of the lines of force through the human joint during gait. The contact point between femur and tibia moves toward the Posterior direction as the knee undergoes flexion, reflecting the coupling of anterior and Posterior motion with flexion/extension. The anterior/posterior displacement of the contact Point on the tibia plateau during one gait cycle is about 16 mm. for the lateral condyle and 25 mm. for the medial condyle using the employed model Also. the femur motion on the tibia undergoes lateral/medial movement about 7 mm. and 10 mm. during one gait cycle for the lateral condyle and medial condyle. respectively. The developed computational model maybe Potentially employed to identify the joint degeneration.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.244-253
• /
• 1997

During preparation of narrow curved canals, procedural accidents such as, ledge, zipping, and transportation are frequently encountered and may lead to failure of endodontic therapy. To reduce these procedural errors and efficiently manage curved canals, various modifications in instrumentation technique and the design and flexibility of instruments have been advocated. This study compared the maintenance of the original canal curvature, cross sectional canal shape, and preparation time during instrumentation with stainless steel hand (K-Flexo) file, and nickel-titanium rotary files (Profile and Lightspeed). Thirty resin blocks with simulated curved canals of 20~25 degrees were used and divided into three groups of 10 each. In group 1, canals were instrumented using a quarter turn/pull technique with K-Flexofiles. Group 2 canals were prepared with rotary NiTi Profiles. Group 3 was prepared with rotary NiTi Lightspeed instrument. Before and after instrumentation, all canals were scanned using stereo microcope, FlexCam camera, and Photoshop 3.0 computer program. The results were as follows : 1. All groups showed some loss of canal curvature after instrumentation. Average loss of canal curvature was 8.6 degrees for K-Flexofile, 7.7 degrees for Profile, and 5.8 degrees for Lightspeed. Lightspeed exhibited significantly less curvature loss than K-Flexofile (p<0.05). 2. At the apical 1-mm level, Profile produced significantly rounder canals than Lightspeed (p<0.05). At the 3-mm level, Profile and Lightspeed exhibited significantly rounder canals than K-Flexofile (p<0.05). 3. Preparation with Lightspeed was significantly faster than Profile and K-Flexofile, and Profile was faster than K-Flexofile (p<0.05). 4. There was no significant difference in incidence of zipping between the hand K-Flexofile and rotary NiTi (Profile and Lightspeed) instruments. Most of apical canals were slightly widened near the apical foramen. As a results of this study, rotary NiTi instruments are superior to the K-Flexofile in regard to the maintenance of original canal curvature, cross-sectional shape and preparation time. But more investigations and studies should be needed to evaluate the ideal canal instrumentation.