• Geotechnical Engineering
• /
• v.12 no.5
• /
• pp.17-26
• /
• 1996

The undrained behavior of Asan marine soil was investigated by using an automated triaxial testing device. The stress-strain behavior at the preand postfailure state of marine soil under undrained compression and eatension conditions was compared with the behavior of pure silt, pure clay and the overall behavior of Asan marine soil was predicted with the modified Camflay model and the bounding surface model. The marine soil sampled in Asan bay area was clayey silts with 70oA silt-30% clay content and the testing samples were prepared in both undisturbed and remolded conditions. All samples are normally consolidated with 400 kPa of effective mean confining pressure and each sample is unloaded to 200, 100, 67 kPa, respectively. And then the shear test was performed with different confining pressure. According to experimental results, there exists an unique failure line whose slope is lower than silt's and higher than clay's. It is identified that the undrained shear strength of normally consolidated samples increases after crossing the phase transformation line because of volume dilation tendency which is not seen in clay. Overconsolidated samples show different soil behavior compared with pure silt due to its tendency of change in volume. It is also found that the overall behavior of Asan marine soil cannot be predicted precisely with the modified Cam-clay model and the bounding surface model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.94-100
• /
• 2010

Purpose: The purpose of this study was to compare the fracture strength of the zirconia ceramic crowns according to tooth position. Material and methods: After 10 metal dies were made for each group, the zirconia ceramic crowns were fabricated using CAD/CAM system ($Lava^{TM}$ All-Ceramic System) and each crown was cemented on each metal die with resin cement (Rely $X^{TM}$ Unicem). The cemented zirconia ceramic crowns mounted on the testing jig were inclined with 30 degrees to the long axis of the tooth and the universal testing machine was used to measure the fracture strength. Results: 1. The fracture strength of the zirconia ceramic crown in the lower 1st molar (2963 N) had the highest and that in the lower central incisor (1035 N) had the lowest. 2. The fracture strength of zirconia ceramic crown was higher than that of the IPS Empress crowns in all tooth position. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the long axis of the crowns. 4. There were no significant differences on the fracture strength of the zirconia ceramic crowns according to tooth position except in premolar group. Conclusion: Within the limitations of this study, the results suggested that strength of zirconia ceramic crown is satisfactory for clinical use.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5401-5406
• /
• 2014

Background: Cancer is the leading cause of mortality around the world. However, the majority of cancers occur as a result of modifiable risk factors; hence public awareness of cancer risk factors is crucial to reduce the incidence. The objective of this study was to identify the level of public awareness of cancer risk factors among the adult Omani population. Materials and Methods: A community based survey using the Cancer Awareness Measure (CAM) questionnaire was conducted in three areas of Oman to measure public awareness of cancer risk factors. Omani adults aged 18 years and above were invited to participate in the study. SPPSS (ver.20) was used to analyse the data. Results: A total of 384 participated from 500 invited individuals (response rate =77%). The majority of respondents agreed that smoking cigarettes (320, 83.3%), passive smoking (279, 72.7%) and excessive drinking of alcohol (265, 69%) are risks factors for cancer. However, fewer respondents agreed that eating less fruit and vegetables (83, 21.6%), eating more red or processed meat (116, 30.2%), being overweight (BMI> 25) (123, 32%), doing less physical exercise (119, 31%), being over 70 years old (72, 18.8%), having a close relative with cancer (134, 34.9%), infection with human papilloma virus (HPV) (117, 30.5%) and getting frequent sunburn during childhood (149, 38.8%) are risk factors for cancer. A significant association was found between participant responses and their educational level. The higher the educational level, the more likely that respondents identified cancer risk factors including smoking (p<0.0005), passive smoking (p= 0.007), excessive drinking of alcohol (p<0.0005), eating less fruit and vegetables (p= 0.001) and infection with HPV (p<0.0005). Conclusions: The majority of respondents in this study in Oman were not aware of the common risk factors for cancer. It may be possible to reduce the incidence of cancers in Oman by developing strategies to educate the public about these risk factors.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1295-1301
• /
• 2015

Background: Cancer imposes a significant economic burden on individuals, families and society. The purpose of this study was to estimate the economic burden of cancer using the healthcare claims and cancer registry data in Korea in 2009. Materials and Methods: The economic burden of cancer was estimated using the prevalence data where patients were identified in the Korean Central Cancer Registry. We estimated the medical, non-medical, morbidity and mortality cost due to lost productivity. Medical costs were calculated using the healthcare claims data obtained from the Korean National Health Insurance (KNHI) Corporation. Non-medical costs included the cost of transportation to visit health providers, costs associated with caregiving for cancer patients, and costs for complementary and alternative medicine (CAM). Data acquired from the Korean National Statistics Office and Ministry of Labor were used to calculate the life expectancy at the time of death, age- and gender-specific wages on average, adjusted for unemployment and labor force participation rate. Sensitivity analysis was performed to derive the current value of foregone future earnings due to premature death, discounted at 3% and 5%. Results: In 2009, estimated total economic cost of cancer amounted to $17.3 billion at a 3% discount rate. Medical care accounted for 28.3% of total costs, followed by non-medical (17.2%), morbidity (24.2%) and mortality (30.3%) costs. Conclusions: Given that the direct medical cost sharply increased over the last decade, we must strive to construct a sustainable health care system that provides better care while lowering the cost. In addition, a comprehensive cancer survivorship policy aimed at lower caregiving cost and higher rate of return to work has become more important than previously considered.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.102-109
• /
• 2017

The high pressure pump of a diesel injection system compresses the fuel supplied at low pressure into high pressure fuel and maintains the fuel of the common rail at the required pressure level according to the engine operating conditions. The high pressure pump is required to operate normally in order to compress the fuel to a high pressure of 2000 bar during the entire lifetime of the vehicle. Consequently, a suitable design technique, material durability and high precision machining are required. In this study, the high pressure pump simulation model of a 1-plunger radial piston pump is modelled by using the AMESim code. The main simulation parameters are the displacement, flow rate and pressure characteristics of the inlet and outlet valves, cam torque characteristics, and operating characteristics of the fuel metering valve and overflow valve. In addition, the operating characteristics of the pump are simulated according to the parameter changes of the hole diameter and the spring initial force of the inlet valve. The simulation results show that the operation of the developed pump model is logically valid. This paper also proposes a simulation model that can be used for current pump design changes and new pump designs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5107-5110
• /
• 2013

Background: Among women with haematuria, defining individuals under high risk for bladder cancer based on reproductive factors prior to cystoscopy would be of great benefit in the management of this condition. The aim of this study was to compare age and reproductive factors such as menopausal status, parity, age at first delivery and age at the last delivery between women who have haematuria with or without bladder cancer. Materials and Methods: A total of 463 patients underwent diagnostic cystoscopy in D$\ddot{u}$zce University Faculty of Medicine between 1 June 2008 and 1 June 2013. Female patients who presented with persistent microscopic or macroscopic haematuria and underwent standard evaluation for haematuria including urinalysis, urine culture, urine cytology, urinary tract imaging with excretory urography or computerized tomography with contrast enhancement and endoscopic evaluation of the urethra and bladder were included in this study. Exclusion criteria were tobacco use and high risk occupations for bladder cancer such as textile, dry cleaning, painting and etc. Forteen women had hematuria due to benign conditions, and 18 due to bladder cancer. Data were retrospectively retrieved from the medical records of Duzce University Hospital. Results: Patients with haematuria due to benign reasons did not significantly differ from patients who were found to have bladder cancer in terms of age (p=0.28), menopausal status (p=0.29), mean parity (p=0.38), being nulliparous (p=0.57), parity ${\geq}3$ (p=0.22), age ${\leq}18$ years at first delivery (p=1.00), age ${\geq}30$ years at last delivery (p=0.26), age ${\geq}35$ years at last delivery (p=0.23) and percentage of the patients with advanced age (${\geq}65$ years) (p=0.18). Conclusions: It is difficult to predict a high risk for developing bladder cancer in women with haematuria based solely on reproductive factors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.466-477
• /
• 2005

Statement of problem : Problem of matching the appearance of porcelain restorations with the patient's natural dentition has always been a concern to dental clinicians. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. Among the various factors, shade and translucency or the core can significantly affect the overall esthetics of the restoration and should be considered when selecting an all-ceramic system. Purpose : The purpose of this study was to spectrophotometrically evaluate the influence of different zirconia systems and core thickness on the final shade of all-ceramic restorations using the CIEL$^*a^*b^*$ system. Material and Methods: Core specimens (n : 20 per group) of In-Ceram Alumina, In-Ceram Zirconia, Digident CAD/CAM Zirconia, Cercon Zirconia were fabricated 20mm in diameter. 10 specimens of each group were fabricated at core thickness of 0.5mm and 0.7mm. These core specimens were veneered with shade Al & A3 porcelain of the recommended manufacturer. CIEL$^*a^*b^*$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan). Color differences were calculated using the equation ${\Delta}E^*=[({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2]^{\frac{1}{2}}$. Results : 1. Specimens of core thickness 0.5mm and 0.7mm did not exhibit clinically perceived color difference. 2. Regarding shade reproducibility, In-Ceram Alumina and In-Ceram Zirconia showed significant difference within each group. 3. Cercon Zirconia group showed the highest $L^*$ value and Digident Zirconia group showed lowest $a^*$ & $b^*$ value. 4. Generally the shade difference between materials was higher in the A3 shade group than in the Al shade group. Conclusion: Within the limitations of this study, there was no color difference after increase in core thickness and every all-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• The Journal of Korean Medicine
• /
• v.23 no.2
• /
• pp.211-224
• /
• 2002

Background and Objective : In order to investigate the effects of Gilgyunglwedok-tang (GRT) on antitumor activity and antimetastatic activity, studies were done experimentally. Materials and Methods : Experimental studies were perfonned for the cytotoxic effect on BALB/c mouse lung fibroblast cells, the proliferating effect of splenic lymphocyte, the expression of CD3e/CD4, CD3e/CD8, and B220 in peripheral blood mononuclear cells (PBMCs), the cytotoxic effect on A549, SK-OV-3, SK-MEL-2, MCF-7 cells, the inhibitory effect on the activity of DNA topoisomerase I, the T/C% in ICR mice bearing S-180, the inhibitory effect of Cell adhesive of A549 Cells and SK-OY-3 Cells to complex extracellular matrix, the inhibitory effect on lung colonies, the change of lung tissue, the antiangiogenic activity, and the effect on MMP-2 and MMP-9 gene expression in the RT1080 cell line. Results and Conclusion : The results were obtained as follows : 1. In the cytotoxic effect on BALB/C mouse lung fibroblast Cell, GHT didn't show the significant cytotoxic effect on BALB/C mouse lung fibroblast cell compared to the control group. 2. In thymidine uptake assay, GHT showed the significant proliferating effect of splenic lymphocyte in proportion to the concentration. 3. In the expression of CD3e/CD4, CD3e/CD8, and B220 in peripheral blood mononuclea cells (PBMCs) of mice, GRT had no significant change to the normal group in CD4. However, GRT showed an increase to the normal group in CD8 and GHT in the only $1\mu\textrm{g}/ml$ category showed an increase to the normal group in B220. 4. In the cytotoxic effect of GRT on A549, SK-OY-3, SK-MEL-2 and MCF-7 cells, there was no significant cytotoxic effect compared to the control group. 5. In the inhibitory effect on the activity of DNA topoisomerase I, GHT in the $10\mu\textrm{g}/ml$ category showed the inhibitory effect on the activity of DNA topoisomerase I in proportion to the concentration. 6. In the T/C% in ICRmice bearing S-180, GHTtreated group showed 123.7% of T/C% compared to the control group. 7. In the inhibitory effect of cell adhesive of A549 Cells and SK-OV-3 Cells to complex extracellular matrix, GRT in the only $100\mu\textrm{g}/ml$ category showed the significant inhibitory effect compared to the control group. 8. In the inhibitory effect on lung colonies, GHT showed the significant inhibitory effect on lung colonies compared to the control group. 9. In the change of lung tissue, GHT showed a significant decrease of lung cancer growth, interalveolar fibrosis and hyaline material compared to the control group. In the development of lymphocyte around lung cancer cells and lung parenchymal, GHT showed the significant inducement efficacy compared to the control group. 10. In CAM assay, the antiangiogenic activity of GHT showed 30%. 11. In the effect on MMP-2 and MMP-9 gene expression in the RT1080 cell line, GHT had no significant inhibitory effect on MMP-2 and MMP-9 gene expression compared to the control group. According to the above results, it could be suggested that GHT has an antitumor activity and antimetastatic activity.

• The Journal of Korean Medicine
• /
• v.28 no.4
• /
• pp.74-85
• /
• 2007

Objective : In this study we wanted to confirm if proper stimulation and de-Qi of traditional Korean medical acupuncture could increase hot flash relief efficacy. Design : A randomized controlled, single blind study. We used two modalities of acupuncture, one with optimal stimulation [Study group; Korean medical acupuncture (TKMA)] and one with minimal stimulation [Control group; Minimal acupuncture (MA)]. Same acupoints [PC6(內關), HT8(少府), HT7(神門), LI4(合谷), ST36(足三里), SP6(三陰交), Ren4(關元)] were used in both groups. Fifty-two patients were treated twice a week for 8 weeks, and follow up was done after 4 weeks from the last treatment. Patients were checked hot flash VAS (visual analog scale), frequency and duration every time they visited. Results : Hot flash relief efficacy by 100mm hot flash VAS was obvious in both groups. Hot flash VAS scores of study group were smaller than the scores of control group at the early stage (3rd, $4^{th}$ and $8^{th}$ visit), but there wasn't a remarkable difference between study and control group at the end of the trial. Besides, diminution of hot flash VAS was faster and more even in the study group than control group by visualization using 'Box plot'. We compared frequency and duration of hot flash, 100mm sweating, palpitation, sleep disturbance VAS, and Kupperman Index, MENQOL, Patient's global assessment score. Both groups showed definite decrease from the baseline, but the difference was not statistically significant. There wasn't any adverse event. Hot flash relief efficacy was kept in most patients after 4 weeks' follow-up. Conclusion : Acupoint combination by Traditional Korean medical theory is effective on hot flashes and hot flash relief efficacy was faster and more even in optimal stimulation than minimal stimulation.

• Journal of Biomedical Engineering Research
• /
• v.26 no.6
• /
• pp.393-398
• /
• 2005

An electromechanical type is the most useful mechanism in the various pumping mechanisms. It, however, requires a movement converting system including a ball screw, a helical cam, or a solenoid-beam spring, which makes the device complex and may lessen reliability. Thus, the authors have hypothesized that an electromagnetic actuator mechanism can eliminate the movement converting system and that thereby enhance the mechanical reliability and operative simplicity of an electro­pneumatic pump. The purpose of this study was to show a novel application of electromagnetic actuator mechanism in pulsatile pump and to provide preliminary data for further evaluations. The electromagnetic actuator consists of stators with a single winding excitation coil and movers with a high energy density neodymium-iron-boron permanent magnet. A 0.5mm diameter wire was used for the excitation coil, and 1000 turns were wound onto the stators core with parallel. A prototype of extracorporeal electro-pneumatic pump was constructed, and the pump performance tests were performed using a mock system to evaluate the efficiency of the electromagnetic actuator mechanism. When forward and backward electric currents were supplied to the excitation coil, the mover effectively moved back and forth. The nominal stroke length of the actuator was 10mm. The actuator dimension was 120mm in diameter and 65mm in height with a mass of 1.4kg. The prototype pump unit was 150mm in diameter, 150mm in thickness and 4.5kg in weight. The maximum force output was 70N at input current of 4.5A and the maximum pump rate was 150 beats per minute. The maximum output was 2.0 L/minute at a rate of 80bpm when the afterload was 100mmHg. The electromagnetic actuator mechanism was successfully applied to construct the prototype of extracorporeal electro­pneumatic pump. The authors provide the above results as a preliminary data for further studies.