• 품질경영학회지
• /
• 제25권3호
• /
• pp.74-85
• /
• 1997

In this paper we calculate the subgroup size necessary for detecting the change of percent defective with several detection probabilities for orginal population fraction nonconforming p, changed population fraction nonconforming $p^*$, and the ratio k=$p^*$/p in the usage of p control charts. From our calculation we can know the error level of normal a, pp.oximation in detection probability calculation and recommend the subgroup size with lower error levels of normal a, pp.oximation, and then we show the reasonable subgroup size necessary for p, $p^*$, k, and the detection probability of the change of fraction nonconforming in a process. The information that we here show in tables will be useful when p control chart users decide the subgroup size in the p control chart users decide the subgroup size in the p control chart.

• 대한방사선치료학회지
• /
• 제3권1호
• /
• pp.27-36
• /
• 1989

In order to calculate the dose on each interest point in five types of irregularly shaped fields used commonly in radiotherapy, the tissue-air ratios (TAR) in these fields for Go-60 gamma radiation were calculated using the newly devised SAR-chart. The TARs calculated from newly method of using the SAR-chart, computer method and approximation method at the interest point were compared to the TARs obtained from measurement. The result are as follows; In case of the interest points on central axis the calculated TARs in irregularly shaped fields by the above mentioned methods were well agreed within the error of $1\%$, whereas for the interest points on off-axis the calculated TARs were resulted in the maximum errors of $2.4\%,\;2.3\%$ and $8.8\%$ respectively. From these results, the accuracy of calculation method of using the SAR-chart was comfirmed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.39-42
• /
• 2012

Pusher-Loaded Scrapers are important construction equipment for large earthmoving operations. Production rates of a Pusher-Loaded Scraper vary greatly in accordance with the temperature or elevation, the equipment performance, haul speed, haul-road conditions, the method of loading, and Number of scrapers per one pusher. Determining of most economical scrapers fleet regarding the size of equipment, model name, and number of scrapers demands time-consuming calculation because it needs to reference of varied performance charts or tables and repeat complicated calculation. In this study, decision-making support system for the Optimal Pusher-loaded Scrapers Fleet is suggested for the purpose of calculating easily and handling effectively variables which are changed depend of the work conditions. The prototype of this program is developed using MATLAB. And the Database of Pusher-loaded Scraper embodies Performance chart & Retarder chart, soil properties, and calculation-support table.

• 한국태양에너지학회 논문집
• /
• 제22권4호
• /
• pp.10-17
• /
• 2002

This study aims to develop the analysis tool that assesses the sunlight at any given point of a window or solar collector array shaded by surrounding obstacles. The development of this software, named SunChart, focused to the user-friendliness and the reliability. This SunChart can calculate the solar radiation as well as shading on the certain face. The calculation results by SunChart show by both numerically and graphically and are in a good agreement with ones obtained from "Sunrise Sunset" developed at Korea Astronomy Observatory and from TRNSYS.

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1147-1154
• /
• 2004

This paper is the third of several companion papers which compare the method of Air-Fuel ratio determination. In the previous works, Eltinge chart was expanded to arbitrary fuel composition as a reference exhaust composition. The compensation of unburned hydrocarbon in Eltinge chart and comparison of Spindt and Eltinge method were also discussed. In addition to Eltinge and Spindt's one, however, there are many methods which calculate Air-Fuel ratio from exhaust emission. Among these methods, carbon balance and oxygen balance are widely used in practice. In some applications, linear formula from statistical method is being used in the field due to its simplicity and convenience. In this paper, these various methods are evaluated and compared with Eltinge results and new linear formula is proposed for the gasoline fuel. The results show that the corrected carbon balance equation has excellent agreement with Eltinge and Spindt's one. On the other hands, the oxygen-balanced formula has a limitation according to the mixture state and AFR. For gasoline fuel, newly proposed linear equation has good compatibility with Eltinge and Spindt up to AFR 17.

• 대한안전경영과학회지
• /
• 제10권2호
• /
• pp.195-203
• /
• 2008

The purpose of this study is to develop a guideline of process capability evaluation and to apply this guideline improving the quality of products, especially in the small and medium enterprises. In this study we deal in the concept of process capability evaluation, the calculation of process capability index, and the application of a case study. Man must compare the state of process with the standards in evaluating of the process capability. Control chart can be used as a yardstick for judgement for the long term period and the distribution shape of histogram for the short term period. Man should regard to the significant figure by the calculation of process capability index.

• 한국의학물리학회지:의학물리
• /
• 제6권1호
• /
• pp.13-18
• /
• 1995

고선량의 RALS(Remote Afterloding Syetem)를 이용한 근접조사에서 선원의 위치에 따라 선량분포는 거리제곱의 반비례 형태로 변화되므로, 관심점의 흡수선량은 선원의 교정에 의해 크게 영향을 받는다. 자궁경부암 강내치료시 정확한 흡수선량을 결정하고자 선원을 교정하고, 선원의 위치에 따른 선량분포도에 의한 계산값과 반도체 검출기와 전리함을 이용한 설측값과 차이를 비교하고 보정 방법을 논의 하였다. Bulcher-RALS를 이용하여 치료에 사용된 선원의 교정은 공기커마와 사각형 아크랄 팬톰을 이용하여 r 인자에 의한 거리 역자승법칙으로 계산하였고, Co-60 선원의 8cm 거리에서 검교정된 측정기를 이용한 선량율을 비교치로 이용하였다. 선량측정치의 재현성은 팬톰내에서 0.3~1.1% 였으며, 측정치의 분포는 Bulcher-RALS 선량분포도에 의한 계산값과 팬톰측정치의 비교에서 -3~17%, 강내치료를 받은 18 명의 환자를 대상으로한 직장내 흡수선량에서 체내 실측값과 차이는 환자와 선원의 위치에 따라 -6~＋21%로 측정값이 평균 6.3% 높게 나타났다.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1548-1562
• /
• 2003

This paper is the first of several companion papers which compare the methods of Air-fuel ratio determination. There are many methods which calculate Air-Fuel ratio from exhaust emission. Most of them are based on the simple chemical equations, which use balance of atom, and the error of the calculation is negligible as far as the instrumentation accuracy is guaranteed. They assume homogeneous mixture and complete combustion to the extent of oxygen availability. Because of these simple assumptions, they cannot offer the information about the fuel distribution state and the malfunction of instrument. For these limitations, Eltinge offered new one based on stricter mathematical model. This result coincides with the others very well and gives more information about the mixture state and instrumentation. Consequently this might be a general solution for Air-fuel ratio determination and exhaust composition. The objects of the calculation, however, were not commercial fuels except gasoline and the compensation method of unburned hydrocarbon was not appropriate to recent analyzer. Moreover he did not consider the fuel which contains oxygen, such as methanol, ethanol and blend of gasoline-alcohol. In this paper, Eltinge chart is expanded to the arbitrary fuel composition as the reference exhaust compositions for the purpose of further discussions about Air-fuel ratio determination methods and the charts fur gasoline, diesel, methanol, M85, liquefied petroleum gas(LPG), natural gas(NG), propane, butane are illustrated.

• 한국의학물리학회지:의학물리
• /
• 제10권2호
• /
• pp.95-101
• /
• 1999

원격방사선치료 기록부의 QA 과정에서 관찰된 환자에 대한 부정확한 자료나 방사선치료 기록부에 기록이나 이기의 오류로 인한 선량이나 선량분포의 오류의 종류와 빈도를 분석하는 것이다. 서울대학교병원 치료방사선과에서는 수치 오류을 시정하기 위해 의학물리학자가 치료개시전과 일주일에 일회 이상 방사선치료 기록부의 병록지와 배치도면, MU 계산용지나 치료계획 요약지, 일일 치료기록지를 점검하고 있다. 관찰된 오류를 다음과 같이 분류하였다. 1) 환자신원 확인, 2) 물리적인 요소를 포함하지 않지만 병록지의 누락이나 미기재, 3) 배치도면의 누락이나 setup 에 필요한 자료의 누락과 착오, 4) MU와 점선량 계산용지에서는 MU의 오류의 중요 원인별로 구분 및 점선량의 오류, 5) 치료계획 요약지의 분실여부와 환자자료의 오류, 6) 일일 치료기록지에서는 치료사실의 기재누락, 치료일정 착오, 처방선량 착오, setup 착오, MU 착오, 누적선량착오, 7) 선량이나 선량분포의 부정확성을 초래한 오류와 그런 가능성은 있지만 실제 실현되지 않은 오류, 단순히 기록상의 오류 , 8) 서명의 누락에 대해 검사하였으며, 결과는 환자의 수 대신 오류 건수별로 분석하였다. 1996년 6월 17일부터 1999년 7 월 31 일까지 방사선치료 기록부의 QA 에서 환자신원의 불일치는 한건도 없었으며 ,399명의 환자에 대해 431건의 오류가 관찰되었다. 물리적인 오류는 405건, 병록지의 누락 또는 미기재가 9 건, 서명누락이 17건이었다. 배치도면이 없는 경우 23 건 (5.7%), 자료의 누락 21건 (5.2%), 자료의 오기 73건(18.0%) 이었으며, MU의 계산용지가 없거나 계산 없이 치료가 시행된 경우는 13건 (3.2%), MU 계산의 착오 68 건 (16.3%), 점선량의 계산착오 8 건(2.0%), 방사선치료계획 결과 용지의 분실이 1건 (0.2%), 환자자료의 입력 오류가 11건(2.7%), 치료기록의 누락이나 치료의 누락이 8건(2.0%), 치료일정의 오류 13건 (3.2%), MU 계산이나 치료계획의 처방선량과 일일 치료기록지 처방선량의 불일치 20건(4.9%), 치료 setup 의 착오 33건(8.1%), MU의 설정 착오 52건(12.8%), 누적선량 착오 61건(15.1%) 이었다. 선량이나 선량분포의 부정확성을 초래한 오류는 239건(59.0%) 이었으며, 그런 가능성은 있지만 실제 실현되지 않은 오류 142건(35.1%), 단순히 기록상 오류는 24건 (5.9%) 이었다. 관찰된 수치 오류는 다양한 분야에 걸쳐 있었다. 나타난 대부분의 오류는 선량이나 선량분포의 오류에 직접 기여하거나 기여할 우려가 있기 때문에 방사선치료 기록부에서 물리적인 면의 QA를 철저하게 할 필요가 있다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권3호
• /
• pp.206-211
• /
• 2004

In phase controlled rectifier, it's been known that a fast response is achieved by predictive current control without any overshoot. The frequent sampling period is essential to improve the firing accuracy in conventional predict current control. However, improving the firing accuracy if difficult to reduce the period of sampling efficiently because current sampling and predictive current control is carried out in every period and the ON-OFF current control is performed by comparing two different one. To improve the firing accuracy at the predictive current control, the calculated firing angle is loaded into the high-accuracy hardware timer. So the calculation of exact crossing point between the predictive and actual current is the most important. In this paper, the flow chart for proposed firing angle calculation algorithm is obtained for the fastest current control performance in transient state. The performance of proposed algorithm is verified through simulations and experiments.