• 제목/요약/키워드: calcium sulfate

검색결과 337건 처리시간 0.026초

타액 Amylase의 부분 정제[I] (FARTIAL PURIFICATION OF AMYLASE FROM HUMAN MIXED SALIVA [I])

  • 최근배;한수부;이해철;명광식;정태영
    • 대한치과의사협회지
    • /
    • 제10권12호
    • /
    • pp.803-807
    • /
    • 1972
  • 사람타액의 Amylase 부분 정제를 위하여 각 %의 Ammonium Sulfate 포화획분을 얻은 다음 Calcium phosphate gel로 처리하고 각 농도의 Na₂HPO₄로 유출시킨 일차실험결과는 다음과 같다. 1. Ammonium Sulfate 포화획분중 50-70% 포화획분의 Amylase활성이 가장 높았다. 2. Amylase 비활성은 0.02M Na₂HPO₄로 유출한 획분에서 가장 높았다.

  • PDF

Premature Stiffening of Cement Paste Associated with AFm Formation

  • Chung, Chul-Woo;Lee, Jae-Yong
    • 한국건축시공학회지
    • /
    • 제11권1호
    • /
    • pp.83-90
    • /
    • 2011
  • The purpose of this research is to investigate the effect of AFm formation on the stiffening process of cement paste. High and low alkali sulfate clinkers were used for the experiments. The flow and stiffening behavior of cement paste was investigated using modified ASTM C403 penetration resistance test and oscillatory shear rheology. X-ray powder diffraction (XRD) was used for phase identification associated with stiffening of the paste. It was found from the results that low alkali clinker mixture produced very strong premature stiffening whereas high alkali clinker mixture did not cause premature stiffening. This is because of the large amount of alkali sulfate present in the clinker. Addition of calcium and sodium chloride to the high alkali clinker mixture caused faster stiffening and set.

흑두 추출물에 의한 견직물의 염색성 (Dyeing Properties of Silk Fabric Dyed with Black Soybean Extracts)

  • 류정민;전영실;김인회;남성우
    • 한국염색가공학회지
    • /
    • 제17권5호
    • /
    • pp.20-25
    • /
    • 2005
  • The colorants were extracted from black soybean using a buffer solution. Dyeing properties and the fastness of silk fabric dyed with black soybean extracts were investigated. K/S values of dyed fabric were increased with concentration of black soybean extracts. Magnesium sulfate, nickel sulfate and calcium chloride as mordants are used to obtain reddish purple color. Optimum dyeing temperature of black soybean extracts was $30^{\circ}C$. Fastness were generally good except for light fastness which was extremely poor.

노루궁뎅이버섯의 종균배양적 특성 (Physiological Characteristics of Hericium erinaceus in Sawdust Media)

  • 장현유;노문기
    • 한국균학회지
    • /
    • 제27권4호통권91호
    • /
    • pp.252-255
    • /
    • 1999
  • 노루궁뎅이버섯균의 균사생장과 밀도에 가장 적절한 종균배양적 특성을 요약하면 적정온도는 $25^{\circ}C$, pH는 5, 톱밥 배지의 적정 수분함량은 $65{\sim}70%$이며, 주재료는 참나무톱밥, 첨가재료는 밀기울이었다. 또한 적정 첨가재료인 밀기울의 첨가량은 20%, calcium carbonate의 첨가함량은 0.1%이며, magnesium sulfate의 첨가함량은 0.2%, sucrose의 첨가함량은 0.2%이었다.

  • PDF

황산염 및 알칼리계의 혼합 활성화제에 대한 고로슬래그미분말의 역학적 특성 (Mechanical Properties of Granulated Ground Blast Furnace Slag on Blended Activator of Sulfate and Alkali)

  • 김태완;전유빈;엄장섭
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권5호
    • /
    • pp.104-111
    • /
    • 2015
  • 본 연구는 혼합 활성화제에 의한 알칼리 활성화 슬래그 시멘트(AASC)의 역학적 특성에 관한 연구이다. 사용된 활성화제는 황산칼슘($CaSO_4$, 이하 CS), 황산나트륨($Na_2SO_4$, 이하 SS) 및 수산화나트륨(NaOH)이다. 황산염은 슬래그 중량의 2.5, 5.0, 7.5 및 10.0%로 치환하여 사용하였으며, NaOH는 2M 및 4M 농도의 수용액으로 사용하였다. 본 연구에서는 황산염(CS 및 SS) 치환율에 따른 배합(4가지 배합)과 2M 및 4M의 각각의 NaOH 수용액에 치환된 황산염을 혼합하여 시험체를 제작하였다. 시험체는 총 24가지의 배합에 따라 페이스트로 제작되었으며, 물-결합재 비는 0.5로 하였다. 경화된 시험체에 대해서 압축강도, 휨강도, 초음파속도(UPV), 흡수율 및 XRD 분석을 수행하였다. CS의 활성화제를 사용한 경우는 7.5% CS 치환율, 2M NaOH 수용액 + 5.0% CS 치환율 및 4M NaOH 수용액 + 5.0% CS 치환율의 시험체에서 최고의 압축강도를 나타내었다. 또한, SS의 활성화제를 사용한 경우는 10.0% SS 치환율, 2M NaOH + 7.5% SS 치환율 및 4M NaOH + 2.5% SS 치환율에서 최고의 압축강도 발현을 나타내었다. 휨강도, UPV 및 흡수율은 압축강도 발현 결과와 유사한 경향을 나타내는 것을 알 수 있었으며, XRD 분석결과 시험체 내에 생성된 반응물질은 ettringite, CSH 및 실리케이트계 수화물인 것으로 나타났다. AASC에서 황산염과 NaOH의 혼합 사용은 황산염의 단독 사용의 경우와 비교하여 일정 수준의 농도 범위에서 강도를 향상시키고 조직을 치밀화 시키는 등의 긍정적인 영향을 미치는 것으로 판단된다.

성견 치주 골결손부에서의 수종의 차단막에 의한 치주조직 재생 효과;조직계측학적 메타 분석 (Effects of various membranes on periodontal tissue regeneration;a meta-analysis of the histomorphometry)

  • 이중석;임현창;채경준;정의원;김창성;이용근;조규성;채중규;김종관;최성호
    • Journal of Periodontal and Implant Science
    • /
    • 제37권3호
    • /
    • pp.465-478
    • /
    • 2007
  • Various periodontal barrier membranes used in many clinical and experimental fields, and many recent studies of membranes have reported good results. To improve clinical results, selection of barrier membranes is an important factor. So, we need not only to evaluate various barrier mem-branes, but also to understand the property of barrier membranes appropriate to defect characteristics. For this purpose, this study reviewed available literature, evaluated comparable experimental models, and compared various barrier membranes. From above mentioned methods, the following conclusions are deduced. 1. In i-wall periodontal defect models, new bone formation showed a consistent result, almost 30% of the defect size. New cementum formations measured mostly 40% of the defect size, but showed more variations than new bone formations. This seems to be resulted form difference in experimental methods, so standardization in experimental methods is needed for future studies. 2. Application PLGA barrier membrane to periodontal defect demonstrated improved healing in new bone and new cementum. 3. There was a minimal periodontal regeneration with calcium sulfate barrier membrane only. But, there was better healing pattern in combination of calcium sulfate membrane with bone graft material, such as DFDBA, 4. There was no significant difference between the experimental group that used chitosan mem-brane only and the control group. But, in combination with bone graft material for space maintanence, periodontal regeneration was improved. Overall, Space maintenance is a critical factor for Guided tissue regeneration using barrier membranes. Also, a barrier membrane itself that has difficulty in maintaining space, achieved better result when used with graft material.

Colemanite 광물로부터 붕소화합물의 제조에 관한 연구 : 붕산제조 및 반응기구 (I) (Studies on Preparation of Boron Compounds from Colemanite Ore : Preparation of Boric Acid and Reaction Mechanism (I))

  • 최병현;임형미;지미정;장재훈;백종후;이미재
    • 한국세라믹학회지
    • /
    • 제41권10호
    • /
    • pp.756-765
    • /
    • 2004
  • Colemanite($Ca_2B_6O_{11}{\cdot}5H_2O$)원광을 황산과 반응시켜 붕산을 추출하는 방법과 그 반응 기구에 대하여 연구하였다. colemanite에 황산을 첨가하고 가열하여 colemanite의 칼슘 성분을 황산칼슘으로 분리하고 붕산을 추출할 때, 첨가하는 황산 첨가량 은 colemanite에 존재하는 Ca 성분을 분리할 때 필요한 화학 양론적인 양보다 많아야 되며, 또한 초기 pH가 5 미만이어야 대부분의 colemanite가 분해되었다. 붕산으로 추출 시 영향을 주는 인자로는 분해온도, 분해시간, 황산 첨가량, 황산암모늄 첨가량, pH. 농축 정도 및 건조온도와 시간이었다. 황산 첨가 시 colemanite에 포함되어 있는 불순물 중 CaO와 MgO는 황산과 반응하여 침전을 형성하고, $SiO_2$는 불용 성분으로 황산칼슘과 함께 분리되고, $Al_2O_3,\;Fe_2O_3,\;TiO_2,\;Na_2O$ 등은 황산과 반응하여 액상 상태로 존재하였다. 이 액상에 암모니아를 첨가하여 존재하는 나머지 불순물을 수산화물 형태로 분리, 석출하였으며, pH 조정과 산성화, 농축, 재결정화 과정을 통하여 붕산을 제조하였다.

화학 첨가제와 밀가루의 열처리가 제빵 특성에 미치는 효과 (Effects of chemical additives and heat treatment on the baking properties of wheat flour dough)

  • 이지은;고봉경
    • 한국식품조리과학회지
    • /
    • 제20권2호
    • /
    • pp.119-125
    • /
    • 2004
  • Mixograph를 이용하여 반죽의 물성에 미치는 화학첨가제의 영향을 조사한 결과 ammonium ferric citrate와 ferric sulfate는 0.1% 수준에서는 밀가루 반죽의 탄성에 뚜렷한 영향을 미치지 않았으나, MgSO$_4$, CaCl$_2$ 및 ZnO는 반죽의 탄성을 증가시키며 최적반죽시간을 연장시켜 반죽 시간이 길어졌다. 그러나 Ca과 Mg을 각각 갖는 calcium citrate와 MgCl$_2$는 반죽 시간이나 탄성에 뚜렷한 영향을 나타내지 않았다. 빵의 부피에 미치는 영향은 0.1% MgSO$_4$와 CaCl$_2$가 브롬산 칼륨을 전혀 첨가하지 않은 대조구보다 부피 팽창이 더 커져서 브롬산 칼륨과 같은 팽창제로서의 기능을 확인하였으며, 이들을 첨가한 빵의 속과 겉껍질의 색은 모두 대조구보다 더 밝아서 첨가한 화학첨가제들이 빵의 색을 밝게 하는 것을 확인할 수 있었다. 밀가루의 내재된 효소를 불활성화 시키기 위하여 볶음처리와 UV 및 microwave 조사된 밀가루는 최적 반죽시간을 초과하여 계속 반죽하여도 최적반죽시간 후 반죽의 탄성저하현상이 처리하지 않은 대조구에 비하여 감소되어 반죽의 안정성이 향상되었으나, 열처리한 밀가루로 제조한 빵은 부피가 대조구에 비하여 적었으므로 열처리는 반죽의 안정성은 향상시킬 수는 있으나 빵의 부피 증가에는 효과적이지 못하였다.

돼지의 골기질유도 골형성단백질의 골유도능에 관한 실험적 연구 (AN EXPERIMENTAL STUDY ON THE BONE INDUCTION CAPACITY OF THE PORCINE BONE MATRIX-DERIVED BONE MORPHOGENETIC PROTEIN)

  • 박영욱;이종호;김수경
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제19권3호
    • /
    • pp.265-286
    • /
    • 1997
  • Bone morphogenetic proteins(BMPs) are a group of transforming growth factor beta(TGF-${\beta}$)-related factors and multifunctional proteins, especially the only known biologic factors capable of inducing endochondral bone formation at an extraskeletal site. This study was performed to investigate the effect of the partially purified porcine BMP(pBMP) at an ectopic site. PBMP was partially purified from porcine bone matrix and its activity was monitored by an in vivo bioassay. The purification method utilized extraction of the bone-inducing activity with 4M guanidine, followed by chromatography on heparin-Sepharose. Active fractions were assayed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. And the fractions were reconstituted with inactive insoluble collagenous bone matrix from rats, acid soluble type I collagen from rat tail and chondroitin-6-sulfate sodium salt and implanted into the pectroralis muscle pouches of Sprague-Dawley rats. And the carrier complex was implanted on the opposite side as control. The rats were sacrificed at the day of 1st, 3rd, 5th, 7th, 11th, 14th and 21st after implantation and examined histologically, radiologically and biochemically. And alkaline phosphatase activity and calcium content were used as indices of bone formation. The results were as follows ; 1. Active fractions were localized in a zone between 31 and 40 KDa on SDS-PAGE. 2. The implanted 3.0mg of the partially purified pBMP induced cartilage and bone in the muscle tissue of rats through an endochondral ossification process. 3. Inactive insoluble bone matrix, type I collagen and chondroitin-6-sulfate have functioned as carriers for pBMP, but revealed some foreign body reactions. 4. Soft X-ray didn't reveal significant change between the experimental and the control group. 5. The alkaline phosphatase activities in the experimental group of 5th, 7th, 11th, 14th and 21st were increased significantly compared with control (p<0.01) with the peak in the group of 11th day. 6. With time, the calcium content of the experimental group increased. And the calcium contents in the experimental group of 11th, 14th and 21st were increased significantly compared with control (p<0.01).

  • PDF

알파형 반수석고 기반 결합재의 pH 및 강도발현 평가 (Evaluation of pH and Compressive Strength Development of Alpha-Calcium Sulfate Hemihydrate-based Binder)

  • 이경호;양근혁
    • 한국건축시공학회지
    • /
    • 제16권1호
    • /
    • pp.59-65
    • /
    • 2016
  • 이 연구에서는 중성(pH 6~7) 수준의 식생용 콘크리트 결합재를 개발하기 위해 알파형 반수석고 기반의 결합재들의 pH 값과 압축강도 발현을 평가하였다. 식생용 콘크리트를 위한 결합재의 경제성 및 강도발현을 고려하여, 알파형 반수석고는 GGBS, FA 및 보통포틀랜드 시멘트를 사용하여 25% 및 50% 치환하였다. 알파형 반수석고를 100% 사용한 모르타르의 압축강도는 시멘트 100% 모르타르에 비해 약 57% 수준으로 있었다. GGBS 및 FA 치환율 증가와 함께 알파형 반수석고 기반 결합재의 압축강도는 감소하였지만 pH 값은 재령에 관계없이 6.5~7.5 수준으로 일정하게 있었다. GGBS 및 FA가 치환된 알파형 반수석고 결합재의 주요 수화생성물은 석고($CaSO_4$)이었으며, 수산화칼슘 [$Ca(OH)_2$]은 나타나지 않았다. 반면 시멘트가 치환된 알파형 반수석고의 pH 값은 $Ca(OH)_2$의 생성으로 인해 약 11.5 이상이었는데, 생성된 $Ca(OH)_2$ 양은 단위 시멘트 양의 약 10% 수준이었다.