• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.261-269
• /
• 2022

This study was carried out to predict fruit surface temperature (FST) causing sunburn symptoms and assess the correlation between solar radiation and FST in satusma mandarin (Citrus unshiu Marc. 'Iwasaki'). And to reduce sunburn when ambient temperature was at 31℃, sprinkler system was repeated spraying every at 5 minutes of 30 minutes intervals and 1% calcium carbonate and 4% kaolin solution applied on citrus tree three times to investigate quality and sunburn of fruits. It showed highly significant positive correlation between FST and solar radiation (R = 0.788, p < 0.01), The FST increased up to 16℃ than ambient temperature at daytime. To estimate FST, a linear model y = 0.099 × (air temperature) + 0.018 × (solar radiation) + 20.779 (R = 0.687, p < 0.01) was derived. The canopy temperature of citrus trees was 5.1℃ lower in sprinkler system than in control. The incidence of sunburn showed at 2.1% in sprinkler system twice lower than in control and there was different significance. Fruit quality was similar between treatments. In conclusion, sunburn can be reduced by reflecting sunlight or downing of FST through sprinkler system.

• Clean Technology
• /
• v.24 no.4
• /
• pp.315-322
• /
• 2018

Industrial use of waste oyster shells is limited because of requiring excessive energy for converting natural oyster shells in the form of calcium carbonate ($CaCO_3$) into calcium oxide (CaO) for this purpose. This study aimed to develop energy-saving process for producing solidifying agent using waste oyster shells for backfill materials. It was suggested that oyster shells were converted to calcium sulfates which were mixed with sodium hydroxide solution and red clay, forming solid specimen. The optimal concentrations of sulfuric acid for sulfation of oyster shell and sodium hydroxide to generate calcium hydroxide ($Ca(OH)_2$), were determined. Unconfined compressive strength of solid specimen increased with increasing the content of solidifying agent while it increased also with increasing ratio of natural oyster shells to coal ash. The result clearly demonstrates that solidifying agent consisting of sulfuric acid-treated oyster shell, coal ash, and sodium hydroxide solution, can be effectively utilized for preparing backfill materials using natural oyster shell and coal ash. Sulfuric acid-treated oyster shell-based solidifying agent has not been previously developed and will contribute to broaden industrial application of waste oyster shells.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.88-94
• /
• 1977

A laboratory study was made of liming on the extractability of phosphate added to the uncultivated acid soils differing in clay content. The experiments were conducted with different rates of calcium carbonate and triple superphosphate at field capacity and 50% field capacity. The concentration of extractable phosphate was greatly reduced by simultaneous addition of calcium carbonate in the loam soil. When samples of the loam soil were preincubated for ranging from 0 to 50 days in the presence of calcium carbonate prior to phosphate application, the extractable phosphate concentration increased with preincubation time, and more phosphate was extracted from the soil maintained at 50% field capacity during the incubation. However, the extractable phosphate concentration in the sandyloam soil did not change with preincubation time and was not affected by moisture status. It may be concluded that the extractability of added phosphate was influenced by not only liming time but physical properties of soil.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.61-67
• /
• 2007

Paper sludges collected from three different paper mills were physico-chemically analyzed in order to use them as raw materials for making bed soils and seedling pots. The sludge from a fine paper mill contained lots of inorganic pigment particles used for coating, as those from a newsprint mill and a tissue mill had not. It was clearly through XRD analysis confirmed that all sludges included calcium carbonate. The paper sludge from the tissue mill contained the greatest amount of particles, which would contribute to water absorption and nutrient storage. The sludge from the fine paper mill had the highest density due to many inorganic elements. While the ash content and the total nitrogen content were the highest in the sludge from the fine paper mill, the C/N ratio was the lowest in the fine paper mill sludge. All sludges seemed to have insufficient contents of potassium. The sludges from the newsprint mill and the tissue mill showed more silicon contents than that from the fine paper mill. It was concluded that the sludge from the fine paper mill would be able to be the most efficient raw materials for making bed soils and seedling pots and the other two sludges would be more efficient for intensive culture for crops such as rice and grain with additional supplement of nitrogen and other nutrients.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.6
• /
• pp.562-570
• /
• 2019

To develop natural-tasting fish paste from the pufferfish Lagocephalus wheeleri, steamed pufferfish paste (SPP) was prepared and its optimal processing conditions, quality metrics, and shelf-life characteristics were examined. SPP was produced by thawing golden threadfin Nemipterus virgatus surimi (FA grade), then adding 10% unwashed pufferfish surimi (PS), 1.5% salt, 8.0% wheat starch, 0.25% calcium carbonate, 0.25% sugar, 0.75% sorbitol, 0.25% polyphosphate, and 12.0% pufferfish hot-water extract (Brix 10°). The meat was ground with a Stephan mixer, molded at low temperature (18℃, 10 h), vacuum packed in a laminated plastic film bag, heat treated with hot water (95℃, 50 min), and cooled. As the amount of PS added increased, the whiteness, gel strength, and shear strength of the SPP decreased slightly. However, the SPP folding test showed no deterioration in the texture. In the sensory evaluation, the SPP received a higher rating for taste, smell, and overall taste than commercial Japanese pufferfish Kamaboko. The total amino acid content of the SPP was 10,262.6 mg/100 g; the major amino acids were aspartic acid, glutamic acid, alanine, valine, leucine, lysine, and arginine. The free amino acid content was 133.0 mg/100 g; the major amino acids were taurine, glutamic acid, glycine, alanine, cystine, and lysine.

• Mycobiology
• /
• v.43 no.4
• /
• pp.467-474
• /
• 2015

Development of efficient substrate formulas to improve yield and shorten production time is one of the prerequisites for commercial cultivation of edible mushrooms. In this study, fifteen substrate formulas consisting of varying ratios of palm press fibre (PPF), mahogany sawdust (MS), Gmelina sawdust, wheat bran (WB), and fixed proportions of 1% calcium carbonate ($CaCO_3$) and 1% sucrose were assessed for efficient Lentinus squarrosulus production. Proximate compositions of mushrooms produced on the different substrate formulas were also analysed and compared. Substrate formulations containing 85% PPF, 13% WB, 1% $CaCO_3$, and 1% sucrose were found to produce the highest carpophore yield, biological efficiency and size (206.5 g/kg, 61.96%, and 7.26 g, respectively). Days to production (first harvest) tended to increase with an increase in the amount of WB in the substrate formulas, except for PPF based formulas. The addition of WB in amounts equivalent to 8~18% in substrate formulas containing 80~90% PPF resulted in a decrease in the time to first harvest by an average of 17.7 days compared to 80~90% MS with similar treatment. Nutritional content of mushrooms was affected by the different substrate formulas. Protein content was high for mushrooms produced on formulas containing PPF as the basal substrate. Thus, formulas comprising PPF, WB, $CaCO_3$, and sucrose at 85% : 13% : 1% : 1%) respectively could be explored as starter basal ingredients for efficient large scale production of L. squarrosulus.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.266-273
• /
• 2011

Foamed glass was fabricated by using glass powder and foaming agents. For the glass powder, we used sodalime glass which's manufactured by using refused coal ore obtained as by-product from Dogye coal mine in Samcheok. And for the foaming agents, we used Calcium carbonate, Calcium phosphate and powder of shale type refused coal ore itself which has high content of carbon materials. We additionally used liquid binder for forming, and mixed together. And we formed rectangular shape and treated $800^{\circ}C$ for 20 min in an electrical furnace. The various kinds of foam glass samples were fabricated according to the kinds of foaming agents. The physical properties of samples, as specific gravity and compressive strength, were measured. Pore structure of each samples were investigated too. Foam glass with specific gravity of 0.4~0.7 and compressive strength of 30~72 kg/$cm^2$. Especially we get satisfying foam glass sample with low specific gravity of 0.47 and high compressive strength of 72 kg/$cm^2$ by the use of liquid calcium phosphate as foaming agent. It also had small and even shape of pore structure. Therefore, it is concluded that refused coal ore can be used for raw materials to manufacture secondary glass products such as a foamed glass panel for construction and industrial materials.

• Journal of Life Science
• /
• v.28 no.1
• /
• pp.90-98
• /
• 2018

Eggshell (ES) is a by-product of table eggs with high content of calcium carbonate which can be used as a calcium source in feed. In this study, we have first illuminated the potential application of ES as a novel carrier for probiotics. The carriers used in the study include a SBM (Soybean meal), ESL (Eggshell powder with large particles), ESF (Eggshell powder with fine particles), and the complex carriers (SBM+ESL, SBM+ESF). The structure of carriers absorbed by L. plantarum was confirmed by SEM image. Among these carriers, the complex carrier SBM+ESF showed the highest viability of L. plantarum with pH 7~8 during four weeks storage at room temperature. The SBM+ESF was further tested as a carrier for various probiotic strains at $4^{\circ}C$ or $30^{\circ}C$. All the probiotic strains showed high viability at $4^{\circ}C$ storage. However, a significant reduction of Lactobacillus cells was observed at $30^{\circ}C$ storage. B. lichenifomis maintained high viability whereas B. subtilis, B. amyloliquefaciens, and S. cerevisiae showed the reduction of $2{\log}_{10}$ (CFU/g). These results suggest that if the ESF as a calcium source in feed was mixed with SBM, it can be used as an effective complex carrier for improving the viability of some probiotics including B. licheniformis.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.812-825
• /
• 2019

Two dolomite samples mined from the different mines were calcined using a batch-type microwave kiln ($950/60min^{\circ}C$) to produce $CaO{\cdot}MgO$. The hydration of the $CaO{\cdot}MgO$ samples shows different reactivity. MgO was separated by reacting with a strong acid cation exchange resin using the reactivity of the hydration properties of light dolomite ($CaO{\cdot}MgO$). Calcium ($Ca-(R-SO_3)_2$) was separated from the prepared $CaO{\cdot}MgO$ by the cation exchange resin ($CaO{\cdot}MgO:R-SO_3H=1:12mass%$). High purity MgO (higher than 94 mass %) with unburned $CaCO_3$ (1~2 mass %) was obtained by the separation process. The separated MgO was heated at $950^{\circ}C$ for 60 minutes to afford high purity MgO with MgO content higher than 96%. And High-grade $CaCO_3$ was prepared from the reaction with calcium adsorbed resin ($Ca-(R-SO_3)_2$) and NaOH, $CO_2$ gas.

• 한국해양학회지
• /
• v.27 no.1
• /
• pp.55-65
• /
• 1992

Ninety-seven surface sediment samples, collected from the southeastern part of the Yellow Sea, were analyzed for their contents of five metallic elements, including Fe, Mn, Ni, Cu and Pb as well as their grain-size and calcium carbonate content. The result showed a contrasting behaviour among the five metallic elements. with respect to their relationship with the sediment grain0size. contents of nickel and copper demonstrated a fairly linear relationship with the pediment grain-size whereas those of manganese and lead did not. This different behaviour in these metals was interpreted as being the result of the anthropogenic inputs (for Pb) and modification during the early diagenesis (for Mn). The R0mode factor analysis result also confirmed the different behaviour of manganese and lead from that of copper and nickel. Based on this different behaviour in metals the (Mn+Pb)/(Cu+Ni) ratio was suggested as a possible criterion for distinguishing the fine sediments in the study area, which originated from two different source area. China and Korea.