• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.507-514
• /
• 2015

The Spatial information research institute of the LX Korea land and geospatial informatix corporation manages infrastructure for the LX global navigation satellite system (GNSS), which comprises 30 monitoring stations nationwide. Since 2014, it has conducted network real-time kinematic (RTK) tests using the master-auxiliary concept (MAC). This study introduces the infrastructure of LX GNSS and presents the results of a performance analysis of the LX RTK service. The analysis was based on a total of 25 cadastral topographic control points in Jeonju, Seoul, and Incheon. For each point, performance was measured over one observation, two repeated observations, and five repeated observations. The measurements obtained from LX MAC and the VRS of the National Geographic Information Institute were compared with the announced coordinates derived from cadastral topographic control points. As a result, the two systems were found to have similar performance with average error and standard deviation differing only by 1 to 2 cm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.3
• /
• pp.199-207
• /
• 2003

In the study, the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen far evaluation of accuracy of satellite positioning. First, suggest the validity of GPS/GLONASS, TS/RTK-GPS, and compared the accuracy with that of the classical surveying method. As a result, In static relative surveying, the difference of between the known cadastral supplementary control station and that of the acquired is 0.000∼.0006m in GPS alone, GPS/GLONASS, and In the RTK-GPS/TS, 0.010∼0.077m on the non-ambiguity fixed solutions in the urban area 0.008∼0.078m in the open area. it proved to be valid because it is within the allowed connecting errors, i.e 12cm on the baseline of loom in l/l,200 cadastral map.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2001

This paper presents an investigation into the operational comparison of SPOT triangulation to build GCP library by analytical plotter and DPW (digital photogrammetric workstation). GCP database derived from current SPOT images can be used to other image sensors of satellite, if any reasons, such as lack of topographic maps or GCPs. But, general formulation of a photogrammetric process for GCP measurement has to take care of the scene interpretation problem. There are two classical methods depending on whether an analytical plotter or DPW is being used. Regardless of the method used, the measurement of GCPs is the weakest point in the automation of photogrammetric orientation procedures. To make an operational comparison, five models of SPOT panchromatic images (level 1A) and negative films (level 1AP) were used. Ten images and film products were used for the five GRS areas. Photogrammetric measurements were carried out in a manual mode on P2 analytical plotter and LH Systems DPW770. We presented an approach for exterior orientation of SPOT images, which was based on the use of approximately eighty national geodetic control points as GCPs which located on the summit of the mountain. Using sixteen well-spaced geodetic control points per model, all segments consistently showed RMS error just below the pixel at the check points in analytical instrument. In the case of DPW, half of the ground controls could not found or distinguished exactly when we displayed the image on the computer monitor. Experiment results showed that the RMS errors with DPW test was fluctuated case by case. And the magnitudes of the errors were reached more than three pixels due to the lack of image interpretation capability. It showed that the geodetic control points is not suitable as the ground control points in DPW for modeling the SPOT image.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.39-46
• /
• 2014

Network RTK GNSS positioning technique which has been developed to overcome the limitation of Single reference station RTK is used widely in the field of general surveying, cadastre surveying and engineering surveying due to the high accuracy and efficiency. It is specified Network RTK, Single reference station RTK and Static of GNSS as a surveying method in the regulation of Cadastre Re-survey Surveying. In this study, Network RTK and Static GNSS surveying were accomplished at cadastral re-survey field in Hadong, Gyeongnam and the surveying results were compared. Also, to analyze the performance of site calibration in Network RTK surveying, two types of Network RTK surveying with and without site calibration were accomplished and the results was compared. The research result shows that average positioning error between Network RTK(VRS) without site calibration and Static surveying result is 2.44cm and 1.53cm respectively and average positioning error between Network RTK(VRS) with site calibration and Static surveying result is 0.19cm and 0.82cm respectively at two zone. So, it was proved the effect of calibration in network RTK(VRS) surveying.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.67-80
• /
• 2022

This study proposes a legal limit from the administrative and management standpoint of the city hall/county office/gu office, which is the cadastral authority, in relation to the discrepancy between the actual land use status and the cadastral study that has been continuously raised. And also, from the point of view of civil complaints such as landowners, this study tried to evaluate the practical problems of the current land category system from the point of view of civil complaints such as landowners and to derive a solution to these problems. Therefore, this study indicates how the category of land use is classified, and how land use is restricted by the laws of Registration & Management of public cadastre. Also, it shows the reasons why discrepancy between the land use fixed by the law and the current state of actual use of land occurs. Addtionally, This study suggests a plan to reorganize the Land Category system and it includes consolidation and subdivision of land. The study also describes a way to minimize the targets for conversion of land under control of Land Category System as well as to improve the law that protects the people's property rights.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.2
• /
• pp.61-69
• /
• 2005

The coastal erosion and the look of a heap which are mainly occurred in the district along the coast are found for various forms such as the estuary closing, the estuary sand bar the development of the coast sand bar, and the modification of coastline. Recently, due to the coastal development, these transformations have been intensified. The change of coast, which has been made slow progress is required long-term study on a searching examination of the root cause and a suggestion of a counter measure. In this research, ortho aerial photos were produced to analyze volumes of topographical alternations that have been progressed fer the long run, by 10s cycle from 1940s through 1990s, to compute accurate volumes of coastline variation, through a datum point and G.C.P (Ground Control Point). Also in this study, without respect to water level, the coastline variation was analyzed by using comparatively analyzed a Idlest land map, a cadastral map. And to analyze topographical variation volumes, the tidal station's materials was used under consideration f3r tide. Finally, topographical variation volumes are comparatively analyzed through surveying and sounding and a point of fine of aviation photographing was calculated and revised. After this research, by using ortho aerial photos, We can understand efficiency of these in computing volumes of variations of coastline by analyzing quantitatively erosion and look of a heap. Besides, in the future, these will be used for information gathering of the coastline integration control system.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.685-691
• /
• 2007

In this paper through Honan high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21 cm to 40 cm diminishing to a gentle straight line, distortion of X axis varies 14 cm to 29 cm. Through a revision, the deviation value between the coordinates were 6 mm to 9 mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey (10 cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.45-51
• /
• 2004

Control stations managed by national and local governmes are associated with other survey work and constructing geography information and they are important assets in the national level as the positional standard of the country. Since these control points are managed as some type of register and the control points could not be easily updated due to the loss of control stations from construction work or urban development. Therefore, the users could not understand the present situation of the changed control stations. In this background, the aim of this study was to develop control station management system which the managers can use to efficiently maintain control points and to support the usage of the survey control points. For developing this system, we have designed input, update, network, analysis and statistic functions, and have constructed the system using Mapobject as main engine with other languages such as Visual C++ and Visual Basic. The graphic data used in this system are 1/5,000 digital map and digital cadastral map, and the attribute data of each control station are point name, map tile name, longitude and latitude coordinates, TM coordinates, surveying data with the format of year-month-day and control situation photos and so on. In the result of constructing this control station management system, we could achieve integrated management of graphic, attribute and positioning information of each control station.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.1 s.24
• /
• pp.61-69
• /
• 2003

The study is the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen for evaluation of accuracy of satellite positioning. First, suggest the validity of RTK-GPS, RTK-GPS/GLONASS and compared the accuracy with that of the classical surveying method. As a result. In urban area, in case of real time kinematic positioning when compare between the method combined by GPS/GLONASS and by GPS alone the result of GPS/GLONASS - combination more excellent. And in open ana positioning combined GPS/GLONASS was more excellent than GPS alone in both real time differential and real time kinematic. So, RTK-GPS, RTK-GPS/GLONASS contribute to the digital mapping of Basic map and the existed map necessary for the building of PBLIS to the computerization of cadastral map in the effectiveness in time and in cost and hereafter the combined GPS/TS is expected to contribute to the development of NGIS, Re-investigation of a land register, the execution drawing on site.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1141-1151
• /
• 2007

In this paper through Honam high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21cm to 40cm diminishing to a gentle straight line, distortion of X axis varies 14cm to 29cm. Through a revision, the deviation value between the coordinates were 6mm to 9mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey(10cm). consequently the coordinate conversion is possible using railroad control points as common control points.