• Journal of Aquaculture
• /
• v.15 no.3
• /
• pp.145-155
• /
• 2002

Effect of density (30, 40, 65, 90 or 120/cage) of lantern and bottom cages on growth of the ark shell, Scapharca satowi was studied in the Korean west coast from April 2000 to October 2001, when the following range of environmental conditions prevailed : temperature : 4.2 -25.5 $^{\circ}C, salinity : 30.23-32.$15\textperthousand, dissolved oxygen : 5.12-7.16 $ml$/l, pH : 7.84-8.17, phosphate : 0.22-0.56 $\mu $M, dissolved inorganic nitrogen : 3.16-9.10 $\mu $M, suspended solid : 7.6-17.9 mg/l, chemical oxygen demand: 0.46-1.61 mg/l and chlorophyll-a : 0.92-5.93 $\mug/l. Daily growth rate of shell length ranged from 0.066 to 0.071 mm/day for the lantern net cages, and from 0.079 to 0.082 mm/day for the bottom cages. Total weight also ranged from 0.067 to 0.082 g/day in the lantern net cages, as against 0.099 to 0.114 g/day in the bottom cages. Hemoglobin content of S. satowi (55 mm shell length), which was about 3.9 g/dl during february, 2001, increased to 6.0 and 7.0 g/dl during October, 2001 in animals culture in the lantern and bottom cages, respectively. ANOVA test of the growth rate showed that the growth rate of S. satowi, was significantly dependent on rearing density and the tested culture methods (P < 0.0001). The daily growth rate of the shell length was more significantly correlated with water temperature; the growth rate of shell length and total weight showed a tendency decrease with decreasing temperature. In cages suspended at the bottom, not only the increase shell weight but also the meat obtainable from comparable sized S. satowi was greater. Survival decreased with increasing density and was optimal at the density of 30 individual/cage.

• Clinical and Experimental Pediatrics
• /
• v.53 no.4
• /
• pp.481-487
• /
• 2010

Purpose: Recently many studies show early exposure during childhood growth to endotoxin (lipopolysaccharides, LPS) and/or early exposure to allergens exhibit important role in development of allergy including bronchial asthma. The aim of this study was to evaluate the role of endotoxin and allergen exposure in early life via the airways in the pathogenesis of allergic airways inflammation and airway hyperresposiveness (AHR) in mouse model of asthma. Methods: Less than one week-old Balb/c mice was used. Groups of mice were received either a single intranasal instillation of sterile physiologic saline, 1% ovalbumin (OVA), LPS or $1.0{\mu}g$ LPS in 1% OVA. On 35th day, these animals were sensitized with 1% OVA for 10 consecutive days via the airways. Animals were challenged with ovalbumin for 3 days on 55th days, and airway inflammation, hyperresponsiveness, and cytokine expression were assessed. Measurements of airway function were obtained in unrestrained animals, using whole-body plethysmography. Airway responsiveness was expressed in terms of % enhanced pause (Penh) increase from baseline to aerosolized methacholine. Lung eosinophilia, serum OVA-IgE and bronchoalveolar lavage (BAL) fluid cytokine levels were also assessed. ANOVA was used to determine the levels of difference between all groups. Comparisons for all pairs were performed by Tukey-Kramer honest significant difference test; $P$ values for significance were set to 0.05. Results: Sensitized and challenged mice with OVA showed significant airway eosinophilia and heightened responsiveness to methacholine. Early life exposure of OVA and/or LPS via the airway prevented both development of AHR as well as bronchoalveolar lavage fluid eosinophilia. Exposure with OVA or LPS also resulted in suppression of interleukin (IL)-4, 5 production in BAL fluid and OVA specific IgE in blood. Conclusion: These results indicate that antigen and/or LPS exposure in the early life results in inhibition of allergic responses to OVA in this mouse model of astham. Our data show that early life exposure with OVA and/or LPS may have a protective role in the development of allergic airway inflammation and development of allergen-induced airway responses in mouse model of asthma.

• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.25-29
• /
• 2010

To evaluate the usefulness of newly designed percutaneous bone biopsy needle for pumpkin's specimen collection. We manufactured three types of biopsy needle with different internal processing which were made of 10 mm-diameter acrylic material. We made the conventional type (Ct) similar to the clinical type then compared the test group. The type a (Ta) made 1 cm-length internal processing from the distal, type b (Tb) made taper, and type c (Tc) made internal processing like spiral configuration. We performed 20 times biopsy to get an 10 mm length specimen from pumpkin's surface and evaluated the success rate of the biopsy, length of the specimen, and determine internal processing type of the most suitable biopsy needle (ANOVA test). Success rates of Ct, Ta, Tb, and Tc were 55%, 80%, 90%, and 100%, respectively. The lengths of the specimen of Ct, Ta, Tb, and Tc were $5.6{\pm}1.1\;mm$, $5.9{\pm}0.87\;mm$, $3.9{\pm}0.77\;mm$, and $9.4{\pm}0.54\;mm$, respectively. All groups were statistically significant (p < 0.05) except the group between Ct and Ta (p = 0.28). Newly designed bone biopsy needle seems to be useful for obtaining enough specimen. Tc may be more effective than other types.

• Restorative Dentistry and Endodontics
• /
• v.36 no.5
• /
• pp.425-430
• /
• 2011

Objectives: This in vitro study investigated whether short-term application of calcium hydroxide in the root canal system for 1 and 4 wk affects the fracture strength of human permanent teeth. Materials and Methods: Thirty two mature human single rooted mandibular premolars in similar size and dentin thickness without decay or restorations were hand and rotary instrumented and 16 teeth vertically packed with calcium hydroxide paste and sealed coronally with caviton to imitate the endodontic procedure and the other 16 teeth was left empty as a control group. The apicies of all the samples were sealed with resin, submerged in normal saline and put in a storage box at $37^{\circ}C$ to mimic the oral environment. After 1 and 4 wk, 8 samples out of 16 samples from each group were removed from the storage box and fracture strength test was performed. The maximum load required to fracture the samples was recorded and data were analysed statistically by the two way ANOVA test at 5% significance level. Results: The mean fracture strengths of two groups after 1 wk and 4 wk were similar. The intracanal placement of calcium hydroxide weakened the fracture strength of teeth by 8.2% after 4 wk: an average of 39.23 MPa for no treatment group and 36.01 MPa for CH group. However there was no statistically significant difference between experimental groups and between time intervals. Conclusions: These results suggest that short term calcium hydroxide application is available during endodontic treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.295-300
• /
• 2015

Purpose: The aim of this study was to evaluate the shear bond strength between Ni-Cr alloy and composite resin using universal adhesive systems coMPared to conventional method using metal primers. Materials and methods: For this study, a total of 120 cast commercial Ni-Cr alloy (Vera Bond 2V) disks were embedded in acrylic resin, and their surfaces were smoothed with silicon carbide papers and airborne-particle abrasion. Specimens of each metal were divided into 6 groups based on the combination of metal primers (Metal primer II, Alloy primer, Metal & Zirconia primer, MKZ primer) and universal adhesive systems (Single Bond Universal, All Bond Universal). All specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Shear bond strength testing was performed with a universal testing machine at a cross head speed of 1 m/min. Data (MPa) were analyzed using one-way ANOVA and the post hoc Tukey's multiple comparison test (${\alpha}$=.05). Results: There were significant differences between Single Bond Universal, All Bond Universal, Metal Primer II and Alloy Primer, MKZ Primer, Metal & Zirconia Primer (P<.001). Conclusion: Universal Adhesive system groups indicated high shear bond strength value bonded to Ni-Cr alloy than that of conventional system groups using primers except Metal Primer II. Within the limitations of this study, improvement of universal adhesive systems which can be applied to all types of restorations is recommended especially non-precious metal alloy. More research is needed to evaluate the effect of silane inclusion or exclusion in universal adhesive systems.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.217-225
• /
• 2002

When we use the flowable resin on the primary molars for quick handling, one of the most important property is the wear resistance. This study was performed to compare the wear resistance characteristics of four flowable composite resins [Arabesk flow (group 1), Tetric flow (group 2), Aeliteflow (group 3), Filtek flow (group 4)] to that of one control composite resin [Z100 (group 5)]. Specimen discs(n=10), 10mm wide and 2mm thick, were stored in distilled water at $37^{\circ}C$ for 7 days prior to testing. The specimens were subjected to 50,000 strokes at 2 Hz on the MTS system. During the test, the following parameters were maintained: the lateral excursion at 0.4mm, occlusal force at 2-100N with a force profile in the form of a half sine wave. The measurements of volume loss, depth of wear, and Vicker's hardness number of composite resins, and SEM observations of the polished and abraded surfaces were established. One-way ANOVA and Scheffe's multiple comparison test were employed to detect statistically significant differences among the flowable composite resin groups and the control composite group at P<.05. The following results were obtained: 1. Group 3 showed the least volume loss, while group 4 showed the greatest. The mean volume loss increased in the following order: group 3

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.25-31
• /
• 2004

The quality and sensory characteristics of kimchi during fermentation at 15 $^{\circ}C$ were evaluated. Kimchi was prepared with Chineses cabbage which was brined in 10% salt water added dill hot-water extracts(DK) and stevia hot-water extracts(SK) respectively. The pHs and reducing sugar contents of kimchi were decreased with increasing the fermentation time whereas lactic acid(%) was increased. The pH of DK was lower than control, and the lactic acid(%) contents of DK, SK were equal or higher than control in the first stage of fermentation. Also, the reducing sugar contents of DK, SK were lower than control. These results showed that the fermentation of DK and SK were faster than that of control in the first stage of fermentation. But the lactic acid(%) contents of DK, SK were higher than control after the 12th day of fermentation. It showed that it is possible to extend the preservation of kimchi. With increasing fermentation time, the L value of kimchi juice was increased, and the a value was decreased, and the b value was constant. Especially, the a value of DK, SK was higher than control. It meant that DK, SK kept more carotenoids in kimchi than control. On the 6th day of fermentation, the sensory evaluation analyzed by ANOVA followed Duncan's multiple range test showed that the levels of the green smell and the moldy flavor of DK were significantly lower than control(p<0.05) and the levels of the green smell, the green flavor and the moldy smell of SK were significantly lower than control(p<0.05), too. And the level of overall flavor of DK, SK was higher than control. The most preference among experimental groups was SK and then control, DK. The levels of TBARS of DK, SK were generally lower than control, and the level of TBARS of DK was lower than SK.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.275-282
• /
• 2008

Objective: The purpose of this study was to investigate the effect of using laser for ceramic bracket bonding of porcelain surfaces and to compare it with conventional treatment of porcelain surfaces. Methods: Ninety feldspathic porcelain specimens were divided into 9 groups of 10, with each group having different surface treatments performed. Surface treatment groups were orthophosphoric acid, orthophosphoric acid with silane, hydrofluoric acid, hydrofluoric acid with silane, sandblasted, sandblasted with silane, laser etched, laser etched with silane, and glazed surface served as a control group. In the laser etched groups, the specimens were irradiated with 2-watt superpulse carbon dioxide ($CO_2$) laser for 20 seconds. Ceramic brackets were bonded with light-cure composite resin and all specimens were stored in water at $37^{\circ}C$ for 24 hours. Shear bond strength was determined in megapascals (MPa) by shear test at 1 mm/minute crosshead speed and the failure pattern was assessed. For statistical analysis, one-way ANOVA and tukey test were used. Results: Statistical analysis showed significant differences between the groups. The HFA + S group showed the highest mean shear bond strength ($13.92{\pm}1.94\;MPa$). This was followed by SB + S ($10.16\;{\pm}\;1.27\;MPa$), HFA ($10.09\;{\pm}\;1.07\;MPa$), L + S ($8.25\;{\pm}\;1.24\;MPa$), L ($7.86\;{\pm}\;0.96\;MPa$), OFA + S ($7.22\;{\pm}\;1.09\;MPa$), SB ($3.41\;{\pm}\;0.37\;MPa$), OFA ($2.81\;{\pm}\;0.37\;MPa$), G ($2.46\;{\pm}\;1.36\;MPa$), Bond failure patterns of HFA and silane groups, except L + S, were cohesive modes in porcelain while adhesive failure was observed in the control group and the rest of the groups. Conclusions : A 2-watt superpulse $CO_2$ laser etching of porcelain surfaces can provide a satisfactory result for porcelain surface treatment for ceramic bracket bonding. Laser irradiation may be an alternative conditioning method for the treatment of porcelain surfaces.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.130-136
• /
• 2009

The aim of this study was to develop a method for measuring the slumping resistance of flowable resin composites and to evaluate the efficacy using rheological methodology. Five commercial flowable composites (Aelitefil flow:AF, Filtek flow:FF, DenFil flow:DF, Tetric flow:TF and Revolution:RV) were used. Same volume of composites in a syringe was extruded on a glass slide using a custom-made loading device. The resin composites were allowed to slump for 10 seconds at $25^{\circ}C$ and light cured. The aspect ratio (height/diameter) of cone or dome shaped specimen was measured for estimating the slumping tendency of composites. The complex viscosity of each composite was measured by a dynamic oscillatory shear test as a function of angular frequency using a rheometer. To compare the slumping tendency of composites, one way-ANOVA and Turkey's post hoc test was performed for the aspect ratio at 95% confidence level. Regression analysis was performed to investigate the relationship between the complex viscosity and the aspect ratio. The results were as follows. 1. Slumping tendency based on the aspect ratio varied among the five materials (AF