• 한국해양공학회지
• /
• 제15권2호
• /
• pp.130-134
• /
• 2001

Recently environmental pollution at sea becomes serious, so every governmental organization makes its effort to solve this problem. Combustible ocean wastes as of ropes, fishing nets, and tires are usually highly polymerized compound materials. The problem of ocean waste treatment can be solved by using the pyrolysis method. Pyrolysis characteristics of ocean waste was examined to get the basic data for the production system of fuel from the ocean waste. Thermogravimetric experiment showed that residual mass rate decreases as the velocity of temperature-rising becomes lower. The pyrolysis of waste rope and fishing net occurs at 300~450$^{\circ}C $ and the waste tire does at 350~450$^{\circ}C $. Pyrolysis time is estimated about 15 to 20 minutes in the temperature range when lively act of pyrolysis temperature reached.

• 수산해양기술연구
• /
• 제29권3호
• /
• pp.200-213
• /
• 1993

A model experiment on a midwater rope trawl net which is used in the North Pacific to catch alaska pollack is carried out in the circulating tank to examine the basic efficiency of the net. The prototype is the net used by M/S Hanil(1, 179GT, 2, 700PS), a Korean trawler. The model net was made according to the Tauti's Similarity Law of Fishing Gear in 1/100 scale by considering the condition of the tank. To measure the basic efficiency of the standard model net, the vertical opening and width between some points marked on the net were measured, and the hydrodynamic resistance were determined. Then the constructive conditions of the net were varied as follows and the factors were measured again to compare the efficiency of those nets with that of the standard net(A-1 type) front weight multiplied 1.5 times: A-2 type. buoyancy and depressing force multiplied 1.7 times: A-3 type. front weight multiplied 1.5 times on A-3 type: A-4 type. depressors rigged at ground rope: B type. cod-end stuffed with cashmylon wad: C type. The results obtained can be summarized as follows: 1. The vertical opening at the center of head rope was steeply decreased with the flow velocity increasing and the vertical opening H(m) can be expressed in H=1.2v super(-1.2)(v : flow velocity in m/sec). The width of the net varied a little when the flow velocity was over 0.4m/sec, and the width of net mouth showed about 37% of the distance between the fore tips of net pendant. The shape of net mouth was almost a circle at 0.2m/sec and then steeply flatted elliptically with the flow velocity increasing and the area of mouth S(m super(2)) can be expressed in S=(1.65-2.3v)$\times$10 super(-2). The hydrodynamic resistance of the net increased almost linearly with the flow velocity increasing and the resistance R(kg) can be expressed in R=3.2$\times$d/l$\times$abv. where d/l denotes the mean of d(diameter of netting twine) and l(length of a leg in a mesh) from wing tip to the end of bag-net except cod-end on the side pannel, and a denotes the strectched circumference of the net at the fore end of a meshed part and b the stretched length of the whole net from wing tip to the end of cod-end. 2. In the condition-varied nets, the vertical opening of head rope showed some increase in every type net except the C type, and the increase showed the greatest in the B type by 30~54%, whereas it showed decrease in the C type by 5~10%. Variation of the area of net mouth showed almost the same tendency as the vertical opening and the increase showed the greatest in the B type by 20%, whereas it showed decrease in the C type by 12%. Hydrodynamic resistance showed some increase in every type compared with the standard net, and the rate of increase indicated 5~10% in the A-2, A-3 and A-4 type, 22% in the B type and 3% in the C type.

• 한국식품저장유통학회지
• /
• 제14권1호
• /
• pp.24-29
• /
• 2007

월동배추의 저장방법에 따른 특성과 김치를 위해 절였을 경우 특성을 조사하여 배추의 효과적인 저장방법을 구명하고자 하였다. 저장방법(PE 필름백, 플라스틱 컨테이너, 망저장, 움저장)에 따른 배추의 특성을 3개월 동안 조사한 결과, PE 필름백에 저장한 배추가 겉잎이 부패하는 단점이 있으나 다른 처리에 비해 감모율, 정선 손실율, 외관 등에서 비교적 좋은 결과를 보여주었다. 그러나 저장방법을 달리하여 배추를 절였을 경우에 처리별로 절임특성이 큰 영향을 보이지 않았다. 본 실험 결과로 월동배추의 저장 방법이 절임 특성에는 큰 영향이 없지만 저장방법에 따라서 중량 감모 및 정선손실 정도에 영향을 미치므로 배추는 저장중의 이러한 손실을 줄이고 신선도를 유지할 수 있는 방법에 대한 연구가 보다 필요할 것으로 생각된다.

• 한국농림기상학회지
• /
• 제16권2호
• /
• pp.146-154
• /
• 2014

월동기간 동안의 차나무에 대한 차광망 색상과 차광율에 따른 동해경감에 미치는 영향을 조사한 결과, 차광율 변화에 대한 효과는 차광율이 높아질수록 차나무생육이 불량하고 동해 피해율이 높았으며, 무처리구 대비 55% 차광율에서 신초 및 생엽수확량이 좋게 나타났다. 차광망 색상별로 보면, 투명망(차광망 55% 수준) 처리구와 녹색 차광망 처리구가 무처리구와 검정 차광망 처리구에 비해 생엽수확량과 피해면적이 감소하였다. 투명망 처리구가 무처리구에 비해 동해 피해율이 50%이상 감소하고, 생엽수확량은 무처리구보다 투명망 처리구에서 단위면적당(10a) 68kg 더 많았다. 차광망의 색상별 동해경감은 검정<녹색<투명 색상 순으로 동해 경감률이 다소 높게 나타났다. 처리구간의 미기상변화를 보면 처리구가 무처리구에 비해 평균기온은 $0.7^{\circ}C$ 낮았으며, 평균상대습도는 14.9% 높게 관측되었고, 지중온도는 $0.6^{\circ}C$ 낮은 반면에 토양수분은 4.6% 높게 관측 되었다. 또한 차광망 피복물 설치에 의한 평균풍속은 무처리구 대비 0.7m/s 감소하여, 바람에 의한 과잉 증발산과 토양의 건조를 줄여주는 효과가 있었으며, 동해경감의 방안으로 활용이 가능한 것으로 판단되었다.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권4호
• /
• pp.220-226
• /
• 2005

본 논문은 2002년-2004년 하계에 동중국해의 해저에 침적된 폐기물의 분포량 및 조성을 평가한 연구로서, 트롤 조업위치와 소해면적에 따라 다소 불규칙하지만, 폐기물의 종류가 다양하고 분포량이 높은 것으로 평가되었다. 수집된 폐기물의 년도별 평균값은 약 $31-43kg/km^2$ 범위였고, 지점별 분포밀도는 $0-110.3kg/km^2$ 범위로 제주도 인근 북서쪽에서 최대를 나타내었다. 폐기물 종류로는 어망, 문어단지, 통발, 드럼, 비닐과 목재 등이 많이 확인되었고, 어구, 비닐과 플라스틱 등에서는 한국, 중국과 일본 상표가 다수 확인되어 이 지역의 폐기물 분포는 한 중 일간에 어업 조업 및 선박운항 그리고 육상 유입과 밀접히 관련이 있는 것으로 판단되었다. 침적된 폐기물 중 어망, 통발, 문어 단지와 낚시줄 등 어구관련 물질(Fishing gear)들이 42-72% 범위로 대부분을 차지하였고, 이것은 조업 중에 또는 후에 해양으로 고의적 또는 비고의적으로 투기되어 발생되는 것으로 평가되었다. 또한, 로우프와 드럼은 0-30%로 단위면적당 분포량 변동이 컸고, 고무, 플라스틱, 금속, 목재, 직물류 등은 C5를 제외하고는 대략 25% 이내를 차지하는 것으로 조사되었다. 따라서, 동중국해를 포함한 한반도 주변해역에서의 해양 폐기물에 대한 종합적 대책수립을 위해서 지속적인 모니터링과 연구가 필요하다.

• 대한산업공학회지
• /
• 제23권4호
• /
• pp.669-686
• /
• 1997

In this research, an object-oriented Petri net model for representing a flexible process plan is proposed, which is hierarchically multi-faceted for supporting planning, scheduling, and shop floor control functions. The multi-faceted process plan model consists of the following: a) an object model which represents on object-oriented data model, b) a static model which represents a process flow model with process alternatives, and c) a dynamic model which represents a process activity model with resources alternatives, of a flexible process plan. Petri nets allow the static and the dynamic process plan models to be represented in a unified formalism with an ease of model transformation. The multi-faceted process plan model suggested in this paper, is illustrated with a prismatic port in comprehensive detail.

• 산업공학
• /
• 제12권4호
• /
• pp.575-585
• /
• 1999

This study develops and operating software for a model plant. The model plant consists of an AS/RS system, two machining centers, an assembly line, and supplementary material handling equipments. Devices of each component are connected with the IBS RT24 DIO 16/16-T I/O module. Each I/O module communicates digital signals with the INTERBUS controller board via SUB-D 9 Connector cable. This study is a previous stage for developing an educational CIM software. Petri Nets is used for modelling the storage/retrieval of the AS/RS system, the flow of workpieces and the assembly line for parts. The operating software is coded with Microsoft Visual $C^{++}$ 5.0 and Interbus Library which is a software driver for the controller board. The operating software can be run on a MS Windows 95. Microsoft Access is used for the implementation of databases for BOM, AS/RS, and parts.

• 한국경영과학회지
• /
• 제16권2호
• /
• pp.128-147
• /
• 1991

We propose a dynamic incidence matrix (DIM) for reflecting states and time conditions of a timed Petri net (TPN) explicitly. Since a DIM consists of a conventional incidence matrix, two time-related vectors and two state-related vectors, we can get the advantages inherent in the conventional incidence matrix of describing a static structure of a system as well as another advantage of expressing time dependent state transitions. We introduce an algorithm providing the DIM with a state transition mechanism. Because the algorithm is, in fact, an algorithmic model for discrete event simulation of TPN models, we provide a theoretical basis of model transformation of a TPN model into a DEVS(Discrete Event system Specification) model. By executing the algorithm we can carry out performance analysis of computer communication protocols which are represented TPN models.

• 한국시뮬레이션학회논문지
• /
• 제9권1호
• /
• pp.67-81
• /
• 2000

In this paper, a new software package for modeling and simulating discrete-event dynamic systems is developed. The new software is a general-purpose, graphical tool based on timed Petri-nets and is developed using Visual Basic and Visual C++ for the window environment. It allows the user to graphically build a Petri-net model and enter input data for executing the Petri-net simulation model. It is equipped with a deadlock detection and recovery function as well as an automatic error check function. In addition, the software supports various enabling functions and distribution functions and provides various statistics for the performance measures of interests pertaining to the system. We expect the new software will be used in a wide number of applications including computer, communication and manufacturing systems.

• ALGAE
• /
• 제18권4호
• /
• pp.333-339
• /
• 2003

To establish a cultivation method of Petalonia fascia, seeds and seedlings cultures and growth tests were performed at the Daeri aquafarm in Haeui, Shinan, Jeollanamdo, Korea. Gametes were easily released from the mature plurilocular sporangia. They developed to crustose discoidal stolons and grew to filamentous and discoidal stolons. The indoor seeding was performed by using the 100-150 ${\mu}m$long fragments of stolons on Porphyra nets and the erect thalli developed from the cuttings when the seawater temperatures were 10-15$^{\circ}C$. In the experimental cultivation in the sea, 1-2mm long plantlets were found after 15 days of cultivation; after two months thalli grew to their maximal size of 215-355 mm long blades; after three months the length of thalli began to decrease due to distal disintegration and the plant color changed to yellow and epiphytic diatoms were attached on the thalli, which deteriorated the quality of products. The cultivation of P. fascia by the regeneration of filamentous-discoidal complexes was carried out successfully for the first time in Korea.