• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.130-134
• /
• 2001

Recently environmental pollution at sea becomes serious, so every governmental organization makes its effort to solve this problem. Combustible ocean wastes as of ropes, fishing nets, and tires are usually highly polymerized compound materials. The problem of ocean waste treatment can be solved by using the pyrolysis method. Pyrolysis characteristics of ocean waste was examined to get the basic data for the production system of fuel from the ocean waste. Thermogravimetric experiment showed that residual mass rate decreases as the velocity of temperature-rising becomes lower. The pyrolysis of waste rope and fishing net occurs at 300~450$^{\circ}C $ and the waste tire does at 350~450$^{\circ}C $. Pyrolysis time is estimated about 15 to 20 minutes in the temperature range when lively act of pyrolysis temperature reached.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.3
• /
• pp.200-213
• /
• 1993

A model experiment on a midwater rope trawl net which is used in the North Pacific to catch alaska pollack is carried out in the circulating tank to examine the basic efficiency of the net. The prototype is the net used by M/S Hanil(1, 179GT, 2, 700PS), a Korean trawler. The model net was made according to the Tauti's Similarity Law of Fishing Gear in 1/100 scale by considering the condition of the tank. To measure the basic efficiency of the standard model net, the vertical opening and width between some points marked on the net were measured, and the hydrodynamic resistance were determined. Then the constructive conditions of the net were varied as follows and the factors were measured again to compare the efficiency of those nets with that of the standard net(A-1 type) front weight multiplied 1.5 times: A-2 type. buoyancy and depressing force multiplied 1.7 times: A-3 type. front weight multiplied 1.5 times on A-3 type: A-4 type. depressors rigged at ground rope: B type. cod-end stuffed with cashmylon wad: C type. The results obtained can be summarized as follows: 1. The vertical opening at the center of head rope was steeply decreased with the flow velocity increasing and the vertical opening H(m) can be expressed in H=1.2v super(-1.2)(v : flow velocity in m/sec). The width of the net varied a little when the flow velocity was over 0.4m/sec, and the width of net mouth showed about 37% of the distance between the fore tips of net pendant. The shape of net mouth was almost a circle at 0.2m/sec and then steeply flatted elliptically with the flow velocity increasing and the area of mouth S(m super(2)) can be expressed in S=(1.65-2.3v)$\times$10 super(-2). The hydrodynamic resistance of the net increased almost linearly with the flow velocity increasing and the resistance R(kg) can be expressed in R=3.2$\times$d/l$\times$abv. where d/l denotes the mean of d(diameter of netting twine) and l(length of a leg in a mesh) from wing tip to the end of bag-net except cod-end on the side pannel, and a denotes the strectched circumference of the net at the fore end of a meshed part and b the stretched length of the whole net from wing tip to the end of cod-end. 2. In the condition-varied nets, the vertical opening of head rope showed some increase in every type net except the C type, and the increase showed the greatest in the B type by 30~54%, whereas it showed decrease in the C type by 5~10%. Variation of the area of net mouth showed almost the same tendency as the vertical opening and the increase showed the greatest in the B type by 20%, whereas it showed decrease in the C type by 12%. Hydrodynamic resistance showed some increase in every type compared with the standard net, and the rate of increase indicated 5~10% in the A-2, A-3 and A-4 type, 22% in the B type and 3% in the C type.

• Food Science and Preservation
• /
• v.14 no.1
• /
• pp.24-29
• /
• 2007

Quality changes in winter Chinese cabbages were evaluated during low temperature storage. Flesh and salt-treated Chinese cabbages were put into (a) polyethylene (PE) film sacks (size: $40cm{\times}60cm$, thickness: 0.03 mm, with four perforations each 8 mm in diameter), (b) plastic containers or (c) polypropylene (PP) nets and stored at $0^{\circ}C$. Also, Cabbages were also wrapped in newspapers and stored underground where the average temperature was $2.7^{\circ}C$. The weight loss rates of Chinese cabbages stored in PP nets and plastic containers were greater than those of cabbages stored with PE or wrapped in newspaper. Chinese cabbages wrapped in newspaper and stored underground needed much greater trimming compared to cabbages stored in other ways. The firmness and the soluble solid contents of Chinese cabbages were not affected by the various storage treatments. A better appearance was retained when Chinese cabbages were stored in PE film sacks. Chinese cabbages in PE film sacks stored at $0^{\circ}C$ showed delayed weight loss, less trimming loss, and less change in appearance. The quality changes in salted Chinese cabbages (desalting losses, pH changes, osmolarities, and crude fiber content) were not significantly different after the various treatments. No storage treatment was effective in maintaining a high quality of salted winter Chinese cabbage.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.2
• /
• pp.146-154
• /
• 2014

In the result of effect on freezing damage reduction by the shade net colors and the shade rate to tea trees during wintering period, the high shade ratio decreased tea trees growth and increased freezing damage and 55% of shade ratio based on non treatment developed new leafs and green leaf productivity. By the shade net colors, colorless shade net (55% of shade type) treatment and green shade net treatment increased green leaf productivity and decreased damaged area compare to non treatment shade net and black shade net treatment. Colorless net shade treatment reduced over 50% of freezing damage and increased (10a) 68 kg for green leaf productivity compare to non treatment shade net. The colors of shade net treatments for reduction freezing damaged in order of Black < Green < Colorless but reduction of freezing damage was so high. In the relative microclimates, treatment shade nets were $0.7^{\circ}C$ lower, average relatively humidity 14.9% higher, soil temperature $0.6^{\circ}C$ lower and soil moisture 4.6% higher than non treatment shade net. And treatment shade nets decreased average wind speed 0.7 m/s and it showed us treatment net shades effected to excessive evapotranspiration and soil dry by wind and considered one of good solution for freezing damages.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.220-226
• /
• 2005

This study evaluated the composition and distribution of marine litters on the sea-bed of the East China Sea. Surveys have been conducted by a benthic trawlnet of Dong-baek training ship of Yosu national university during the cruise of 2002-2004. Distribution density showed high value in C5 (north-western area of Jeju Island) with $110.3kg/km^2$ and those of annual mean were about $31-43kg/km^2$. Fishing gears such as nets, pots, octopus jars and etc. were about 42-72% of debris collected in the East China Sea. Composition ratio of rubber, vinyl. metal, plastic, glass, wood, cloth and etc. were within 25% except C5. Rope and drum showed strong fluctuations with 0-30% according to the trawling sites. Some vinyls and nets made in Korea, China and Japan were much collected. It is estimated that fishing gears were discarded to the sea by fishing operation, deliberately or not. An comprehensive program including continuous research, monitoring for marine litters in the Korean sea were necessary.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.4
• /
• pp.669-686
• /
• 1997

In this research, an object-oriented Petri net model for representing a flexible process plan is proposed, which is hierarchically multi-faceted for supporting planning, scheduling, and shop floor control functions. The multi-faceted process plan model consists of the following: a) an object model which represents on object-oriented data model, b) a static model which represents a process flow model with process alternatives, and c) a dynamic model which represents a process activity model with resources alternatives, of a flexible process plan. Petri nets allow the static and the dynamic process plan models to be represented in a unified formalism with an ease of model transformation. The multi-faceted process plan model suggested in this paper, is illustrated with a prismatic port in comprehensive detail.

• IE interfaces
• /
• v.12 no.4
• /
• pp.575-585
• /
• 1999

This study develops and operating software for a model plant. The model plant consists of an AS/RS system, two machining centers, an assembly line, and supplementary material handling equipments. Devices of each component are connected with the IBS RT24 DIO 16/16-T I/O module. Each I/O module communicates digital signals with the INTERBUS controller board via SUB-D 9 Connector cable. This study is a previous stage for developing an educational CIM software. Petri Nets is used for modelling the storage/retrieval of the AS/RS system, the flow of workpieces and the assembly line for parts. The operating software is coded with Microsoft Visual $C^{++}$ 5.0 and Interbus Library which is a software driver for the controller board. The operating software can be run on a MS Windows 95. Microsoft Access is used for the implementation of databases for BOM, AS/RS, and parts.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.16 no.2
• /
• pp.128-147
• /
• 1991

We propose a dynamic incidence matrix (DIM) for reflecting states and time conditions of a timed Petri net (TPN) explicitly. Since a DIM consists of a conventional incidence matrix, two time-related vectors and two state-related vectors, we can get the advantages inherent in the conventional incidence matrix of describing a static structure of a system as well as another advantage of expressing time dependent state transitions. We introduce an algorithm providing the DIM with a state transition mechanism. Because the algorithm is, in fact, an algorithmic model for discrete event simulation of TPN models, we provide a theoretical basis of model transformation of a TPN model into a DEVS(Discrete Event system Specification) model. By executing the algorithm we can carry out performance analysis of computer communication protocols which are represented TPN models.

• Journal of the Korea Society for Simulation
• /
• v.9 no.1
• /
• pp.67-81
• /
• 2000

In this paper, a new software package for modeling and simulating discrete-event dynamic systems is developed. The new software is a general-purpose, graphical tool based on timed Petri-nets and is developed using Visual Basic and Visual C++ for the window environment. It allows the user to graphically build a Petri-net model and enter input data for executing the Petri-net simulation model. It is equipped with a deadlock detection and recovery function as well as an automatic error check function. In addition, the software supports various enabling functions and distribution functions and provides various statistics for the performance measures of interests pertaining to the system. We expect the new software will be used in a wide number of applications including computer, communication and manufacturing systems.

• ALGAE
• /
• v.18 no.4
• /
• pp.333-339
• /
• 2003

To establish a cultivation method of Petalonia fascia, seeds and seedlings cultures and growth tests were performed at the Daeri aquafarm in Haeui, Shinan, Jeollanamdo, Korea. Gametes were easily released from the mature plurilocular sporangia. They developed to crustose discoidal stolons and grew to filamentous and discoidal stolons. The indoor seeding was performed by using the 100-150 ${\mu}m$long fragments of stolons on Porphyra nets and the erect thalli developed from the cuttings when the seawater temperatures were 10-15$^{\circ}C$. In the experimental cultivation in the sea, 1-2mm long plantlets were found after 15 days of cultivation; after two months thalli grew to their maximal size of 215-355 mm long blades; after three months the length of thalli began to decrease due to distal disintegration and the plant color changed to yellow and epiphytic diatoms were attached on the thalli, which deteriorated the quality of products. The cultivation of P. fascia by the regeneration of filamentous-discoidal complexes was carried out successfully for the first time in Korea.