• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.337-343
• /
• 2008

This study was conducted to investigate the distribution pattern, ecological characteristics and life cycle of the Black Soldier Fly (Hermetia illucens, BSF). The BSF was widely distributed throughout Korea. The insect was mainly found in the vicinity of and in cattle sheds, manure sheds, living waste dump grounds, and food waste dump grounds. Developmental characteristics of the BSF are as follows: the egg was long oval shaped of 887 ${\mu}m$ in the major axis and 190 ${\mu}m$ in the minor axis; it weighed 24 ${\mu}g$. Female oviposited ca. 1,000 eggs on average; eggs hatched in 81 hours under laboratory condition ($27^{\circ}C$, 60% R.H.). The duration of the larval stage was approximately $15{\sim}20$ days. The size of the last instar larvae was 21 mm. The cuticle of the pupae gradually acquired red-brown color and the size of them was 19 mm. The pupal stage was shorter for females (16 days) than males (15 days). Adults were sized about $13{\sim}20$ mm long and black-colored. The life span of adult insects was $5{\sim}8$ days for the first generation (June${\sim}$July), $7{\sim}10$ days for the second generation (Aug.${\sim}$Sept.), and $13{\sim}18$ days for the third generation (Sept.${\sim}$Oct.). Mating started on the next day of emergence and actively occurred at the third day after emergence. Mating mostly occurred between 10:00 and 16:00 during which light intensity is highest. Egg-laying started on the third day and was most frequent from the fourth to the sixth day after emergence. Similar to mating time, females oviposited mostly between 10:00 and 16:00.

• Economic and Environmental Geology
• /
• v.31 no.1
• /
• pp.59-68
• /
• 1998

Gravity, magnetic and VLF surveys were carried out to investigate the dimension, nature and stability of the waste materials filled in the Seokdae landfill, Pusan. The Seokdae landfill, which is located in a former valley, was used as a dump for mainly domestic-type waste materials for 6 years from 1987. The landfill site is classfied into A, B, C and D areas according to the sequence of dumping period. The Bouguer gravity anomaly map shows maximum variation of 3.1 mgals on the landfill and its general appearance has close relation with the thickness of waste filled. The local variation of anomaly, however, reflect the degree of compactness of waste materials which may be affected by the nature of waste and dumping time. In the case of area A, where dumping process was terminated at the very last stage, most part show negative anomaly compared to other areas. We think that the composition of the waste materials in the area A is high in leftover food and paper trash and they are still in uncompacted condition. In area B, the general trend of variation of gravity anomaly is appeared to be high anomaly in northern part and decrease to the southern part. This is well matched with the prelandfill topography of the landfill site. The southern part of area B is located in the center of valley and its present surface is comparatively rugged, which may be due to the differential settlement of deep burried waste. The thickness of waste in area C is relatively thin, but the gravity anomaly appears to be low. Considering the present condition of surface, it can be inferred that low density wastes such as leftover food were mainly filled in this area. Area D, as in the case of area B, shows gravity anomaly that has close relation with the prelandfill topography. Magnetic data show the variation of total field intensity varies in the range of 46600~51000 nT, and reach maximum anomaly of 4400 nT. The overall pattern of magnetic anomaly well reflects the distribution of magnetic materials in the landfill. The result of VLF survey reveals several low resistivity zones, which may serve as underground passages for contaminant flow, in the area C located near the small Village.

• The Journal of Engineering Geology
• /
• v.26 no.4
• /
• pp.473-484
• /
• 2016

This study aims to establish a monitoring method for managing the effective maintenance of tailings dams. The monitoring of a tailings dump area involves several parameters and their investigation through a selection of evaluation items. The extents of defects and progressive failures also need to be effectively estimated. Therefore, the monitoring items can be subdivided into categories relating to the retaining wall structure (concrete wall, reinforcing stone wall, mesh gabions) and general facilities (liner, covering soil, slope, tailings, rain protection facility, leachate, planting), and quantitative evaluations can then be conducted for each condition. In doing so, we developed a systematic monitoring method that assesses the dam maintenance condition with grades and scores. The field application of the monitoring method results showed it to provide a more detailed evaluation than existing monitoring methods: the method detected an additional 16 defects missed by conventional methods. The evaluation gave scores of 89.3, 22.2, and 27.8 to the Geumjang mine tailings dam, the Gupoong mine tailings dam, and the Hwachun mine tailings dam, respectively. The advanced method can provide quantitative evaluation and perform detailed monitoring of the dams. This quantitative evaluation can be used to decide on maintenance priorities, select the main management items, and establish schedules of maintenance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.809-817
• /
• 2008

This paper deals with the development of ViscoElastic Continuum Damage Finite Element Program (VECD-FEP++) and its verification with the results from both field and laboratory accelerated pavement tests. Damage characteristics of asphalt concrete mixture have been defined by Schapery's work potential theory, and uniaxial constant crosshead rate tests were carried out to be used for damage model implementation. VECD-FEP++ predictions were compared with strain responses (longitudinal and transverse strains) under moving wheel loads running at different constant speeds. To this end, an asphalt pavement section (A5) of Korea Expressway Corporation Test Road (KECTR) instrumented with strain gauges were loaded with a dump truck. Also, a series of accelerated pavement fatigue tests have been conducted at pavement sections surfaced with four asphalt concrete mixtures (Dense-graded, SBS, Terpolymer, CR-TB). Planar strain responses were in good agreement with field measurements at base layers, whereas strains at both surface and intermediate layers were found different from simulation results due to the complexity of tire-road contact pressures. Finally, fatigue characteristics of four asphalt mixtures were reasonably described with VECD-FEP++.