• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.4
• /
• pp.339-344
• /
• 1986

Frost damage which can reduce yields, impair fruit quality and cause loss of trees is closely related to the occurrence of daily minimum temperature. Horizontal distribution of air temperature minima can be characterized by conditions of radiational cooling and gravitational movement of cold air, which are influenced by the regional topographic features. Observations were made on the air temperature minima over Yangpyeong area, to delineate potential effects of topography on the temperature pattern during spring season. Two routes were selected for the observation. Liquid glass minimum thermometers were installed at 17 sites through the old peach orchards which had been closed due to the frequent freeze-frost hazards during the recent years. This route was 8.5km long and the highest point was 350m above mean sea level. The other route, which was 2.5km in distance, was run with a digital resistance thermometer during the hour just before sunrise. Observations were made both on a calm-clear day (April 30, 1986) and a windy-overcast day (May 1, 1986). The temperature on April 30 was in increasing trend with elevation but this was modified at near the riverside and the downtown area. An orchard lying on a hilltop showed the temperature $1^{\circ}C$ higher than near by lowland of which elevation was about 30m lower. The minimum temperature on the overcast day was little affected by terrestrial conditions but by the atmospheric lapse condition. The peach orchards severely damaged by cold air were found in the area where the lowest minimum temperature was observed. The results may be useful for selection of the proper orchard location to be developed in an area.

• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.341-348
• /
• 2014

Wedge filter could use to increase the dose distribution at the hot dose regions. We evaluated dose discrepancy at surface and build region in the infield and outfield that Metal Wedge (MW) and Enhance Dynamic Wedge (EDW) were interact with photon. In this paper, we used Gafchromic EBT3 film that had excellent spatial resolution, composed the water equivalent materials and changed the optical density without development. The set up conditions of linear accelerator were fixed 6 MV photon, 100 cm SSD, $10{\times}10cm^2$ field size and were irradiated 400 cGy at Dmax. The dose distribution and absorbed dose were evaluated when we compared the open field with $15^{\circ}$, $30^{\circ}$, $45^{\circ}$ metal wedge and enhanced dynamic wedge. A $15^{\circ}$ metal wedge could increase the surface and build up region dose than using a $15^{\circ}$ enhanced dynamic wedge. A $30^{\circ}$ metal wedge could decrease the surface and build up region dose than using a $30^{\circ}$ enhanced dynamic wedge. A $45^{\circ}$ metal wedge could decrease by large deviation the surface and build up region dose than using a $15^{\circ}$ enhanced dynamic wedge. The dose of penumbra region at outfield were increased on the thick side but were decreased on the thin side. It could be decrease the surface dose and build up region dose, if the metal wedge filters were properly used to make a good dose distribution and not closed the distance of surface.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.7
• /
• pp.971-980
• /
• 2013

Dried stoned olive pomace (DSOP) was administered to dairy water buffaloes, and their productive performance and milk composition were analysed. Sixteen pluriparous lactating buffaloes were divided into two uniform groups (control and experimental), taking into consideration the following parameters: milk production (2,192 and 2,102 kg) and duration of lactation (254 and 252 d) of the previous year, distance from calving (51 and 43 d), milk production (9.71 and 10.18 kg/d), body condition score (BCS) (6.44 and 6.31) and weight (617 and 653 kg) at the beginning of the trial. Both diets had the same formulation: second cut alfalfa hay 20%, corn silage 42%, concentrate 38% but the two concentrates differed in their formulation, the experimental one contained 15.50% of DSOP as fed. The employed DSOP showed high amounts of secoiridoids, such as 3,4-dihydroxyphenylethanol (3,4-DHPEA) (1.2 g/kg DM), 3,4-dihydroxyphenylethanol-elenolic acid di-aldehyde (3,4-DHPEA-EDA) (12.6 g/kg DM), p-hydroxyphenylethanol-elenolic acid di-aldehyde (p-HPEA-EDA) (5.6 g/kg DM) and lignans, which are known to be powerful bioactive compounds. The control diet had an energy-protein content of 0.86 Milk FU/kg DM and 143.3 g/kg DM of crude protein, whereas the experimental diet of 0.87 Milk FU/kg DM and 146.6 g/kg DM of crude protein. Each animal of the two groups received 17 kg DM/d and each buffalo of the experimental group, by way of the concentrate, ingested 1.05 kg DM/d of DSOP. The trial lasted 40 days. No significant difference was found between the BCS (6.41 and 6.53), live weight (625.93 and 662.50 kg) and milk production (9.69 and 10.08 kg/d) of the two groups, as was the case for fat, protein, lactose, pH and coagulating parameters of the two milks. The milk fat of the experimental group had a significantly higher content of total tocopherols (10.45 vs $8.60{\mu}g/g$, p<0.01) and retinol (3.17 vs $2.54{\mu}g/g$, p<0.01). The content of the reactive substances with tiobarbituric acid (TBARs) was significantly lower in the milk fat of the experimental group (12.09 vs $15.05{\mu}g$ MDA/g, p<0.01). The acid content of the milk fat of the experimental group had a significantly higher content (p<0.05) of C18:0 and of $C18:3{\omega}6$. LC-MS/MS analysis showed the presence of 3,4-DHPEA ($36.0{\mu}g/L$) in the milk of the DSOP-fed buffaloes, while other phenols were not found. DSOP, in the quantity utilized, can be used in the feeding of the lactating buffalo; the dietetic-nutritional characteristics of the milk are improved due to a greater contribution of tocopherols, retinol and the presence of hydroxytyrosol.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.122-125
• /
• 2004

In radiotherapy of tumors in liver, enough planning target volume (PTV) margins are necessary to compensate breathing-related movement of tumor volumes. To overcome the problems, this study aims to obtain patients' body movements by using a moving phantom and an ultrasonic sensor, and to develop respiration gating techniques that can adjust patients' beds by using reversed values of the data obtained. The phantom made to measure patients' body movements is composed of a microprocessor (BS II, 20 MHz, 8K Byte), a sensor (Ultra-Sonic, range 3 cm ${\sim}$3 m), host computer (RS232C) and stepping motor (torque 2.3Kg) etc., and the program to control and operate it was developed. The program allows the phantom to move within the maximum range of 2 cm, its movements and corrections to take place in order, and x, y and z to move successively. After the moving phantom was adjusted by entering random movement data(three dimensional data form with distance of 2cm), and the phantom movements were acquired using the ultra sonic sensor, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using guinea pigs, the real-time respiration gating techniques were drawn by operating the phantom with the reversed values of the data. The result of analyzing the acquisition-correction delay time for the three types of data values and about each value separately shows that the data values coincided with one another within 1% and that the acquisition-correction delay time was obtained real-time (2.34 ${\times}$ 10$^{-4}$sec). This study successfully confirms the clinic application possibility of respiration gating techniques by using a moving phantom and an ultra sonic sensor. With ongoing development of additional analysis system, which can be used in real-time set-up reproducibility analysis, it may be beneficially used in radiotherapy of moving tumors.

• Journal of Preventive Medicine and Public Health
• /
• v.23 no.1 s.29
• /
• pp.98-105
• /
• 1990

In order to fine out the relationship between traffic accidents and atmospheric phenomena, we have analyzed 2,562 cases, one tenth of the total traffic accidents occurred in Taegu city for a year in 1988. The meteorological elements observed by Taegu Weather Bureau were used. It was divided into two largy categories : the patterns of accident as human injuries and destructions of car. When the accidents were overlapped in each other, it was considered as human injury. Human injuries were subdivided into three parts : death, severe wound and slight in, when more then two cases were overlapped, we choiced severe damage. The average number of daily traffic accidents including human injuries were lowest in winter of four seasons. The accident patterns in accordance with the seasons showed statistically significant difference. The frequency was the highest as 3.3 cases in an hour at $25.1-30.0^{\circ}C$ of atmospheric temperature, the rate of human injury showed the increase by the increased temperature. But there were not significant. Also it was the highest as 3.7 cases in less than 31% of humidity and the rate of human injury as the highest at 41-50%, but not significant. And it was the increasing tendency as wind speed increase, and the rate of human injury was the highest at 6.1-7.0 m/sec, but it was not significant. In relation to precipitation, and visibility, were the highest as 5.4 cases at 5.1-10.0 mm of rainfall, the rate of human injury was increased by the increased precipitation and showed statistically significant. And it was highest within 6 Km of visibility, but the rate of the human injury was the lowest within same distance, and also showed significance. The accidents were higher with snow on the road, but the rate of human injury was comparatively lower, but no significance.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.183-188
• /
• 2012

Purpose: The concern of improving the quality of life and reducing side effects related to cancer treatment has been a subject of interest in recent years with advances in cancer treatment techniques and increasing survival time. This study is an analysis of differing scattered dose to the contralateral breast using common different treatment techniques. Materials and Methods: Eclipse 10.0 (Varian, USA) based $30^{\circ}$ EDW (Enhanced dynamic wedge) plan, $15^{\circ}$ wedge plan, $30^{\circ}$ wedge plan, Open beam plan, FiF (field in field) plan were established using CT image of breast phantom which in our hospital. Each treatment plan were designed to exposure 400 cGy using CL-6EX (VARIAN, USA) and we measured scattered dose at 1 cm, 3 cm, 5 cm, 9 cm away from medial side of the phantom at 1 cm depth using ionization chamber (FC 65G, IBA). We carried out measurement by separating effect of medial tangential field and lateral tangential field and analyze. Results: The evaluation of scattered dose to contralateral breast, $30^{\circ}$ EDW plan, $15^{\circ}$ wedge plan, $30^{\circ}$ wedge plan, Open beam plan, FIF plan showed 6.55%, 4.72%, 2.79%, 2.33%, 1.87% about prescription dose of each treatment plan. The result of scattered dose measurement by separating effect of medial tangential field and lateral tangential field results were 4.94%, 3.33%, 1.55%, 1.17%, 0.77% about prescription dose at medial tangential field and 1.61%, 1.40%, 1.24%, 1.16%, 1.10% at lateral tangential field along with measured distance. Conclusion: In our experiment, FiF treatment technique generates minimum of scattered dose to contralateral breast which come from mainly phantom scatter factor. Whereas $30^{\circ}$ wedge plan generates maximum of scattered doses to contralateral breast and 3.3% of them was scattered from gantry head. The description of treatment planning system showed a loss of precision for a relatively low scatter dose region. Scattered dose out of Treatment radiation field is relatively lower than prescription dose but, in decision of radiation therapy, it cannot be ignored that doses to contralateral breast are related with probability of secondary cancer.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.5
• /
• pp.13-25
• /
• 2012

Ground anchor method is one of the most popular reinforcing technology for slope in Korea. For the health monitoring of slope which is reinforced by permanent anchor for a long period, monitoring of the tension force of ground anchor is very important. However, since electromechanical sensors such as strain gauge and V/W type load cell are also subject to long-term risk as well as suffering from noise during long distance transmission and immunity to electromagnetic interference (EMI), optical FBG sensors embedded tendon was developed to measure strain of 7-wire strand by embedding FBG sensor into the center king cable of 7-wire strand. This FBG sensors embedded tendon has been successfully applied to measuring the short-term anchor force. But to adopt this tendon to long-term monitoring, temperature compensation of the FBG sensors embedded tendon should be done. In this paper, we described how to compensate the effect in compliance with the change of underground temperature during long-term tension force monitoring of ground anchors by using optical fiber sensors (FBG: Fiber Bragg Grating). The model test was carried out to determine the temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon. The determined temperature sensitivity coefficient ${\beta}^{\prime}=2.0{\times}10^{-5}/^{\circ}C$ was verified by comparing the ground temperatures predicted from the proposed sensor using ${\beta}^{\prime}$ with ground temperatures measured from ground thermometer. Finally, temperature compensations were carried out based on ${\beta}^{\prime}$ value and ground temperature measurement from KMA for the tension force monitoring results of tension type and compression type anchors, which had been installed more than 1 year before at the test site. Temperature compensated tension forces are compared with those measured from conventional load cell during the same measuring time. Test results show that determined temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon is valid and proposed temperature compensation method is also appropriate from the fact that the temperature compensated tension forces are not dependent on the change of ground temperature and are consistent with the tension forces measured from the conventional load cell.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.94-101
• /
• 1989

Transport properties of 2DEG at AlGaAs/GaAs interface such as average electron energy, flight distance, each valley occupancy ratio, average electron velocity for various fields are investigated by MONTE-CARLO method. As the electric field increases, more electrons transit drastically from (000) valley to (000) upper valley. This phenomenon shows the nonstationary effect such as velocity overshoot. The duration of the transient decreases from about 1.4 psec for electric field E = 7KV/cm to about 0.7 psec for 12KV/cm. The average electron velocity during transient transport in 2DEG is about 8 times the steady-state velocity for E = 12KV/cm at room temperature. In comparison with bulk GaAs the peak velocity in the 2DEG is higher than that in even pure bulk GaAs at electric field E = 7 KV/cm. On the basis of the fact that the electrons in the 2DEG have larger peak velocity and shorter transient time of velocity than those in the bulk GaAs, it is suggested that the device with 2DEG may obtain higher mobility than that with bulk GaAs.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.3
• /
• pp.311-319
• /
• 2012

Purpose: One of the critical aspects on dispensing glasses is to match the center of pupils to the optical center of lenses as the mismatched glasses are able to induce uncomfortable effects called prism which has been known to induce phoria, a main cause for asthenopia in many cases. Therefore, we investigated the induced prism occurred by mismatching centers between the center of pupils and the optical center of lenses. Methods: In this study, total 103 subjects were examined whether the center of pupils and the optical center of lenses are matched in horizontal and vertical directions, and then, the data was categorized into 4 groups based on the structural components of glasses. Total amount of prism was compared to show the effect of the glasses frame on the prism induction, and the value of measured prism was compared with the German RAL-RG 915 regulations. Results: The results in respect to the horizontal component showed that the induced prism was not found in 10.7% of total subjects. 73.8% of total subjects were influenced by induced prism, the range of prism was in a tolerance level. However, the 15.5% of total subjects seemed to be influenced by prism which is out of the criterion of tolerance. In case of vertical component, 23.3% of total subjects showed no effects of prism while early adopting glasses, 54.4% of total subjects showed a little prism effect within the criterion of tolerance, and 22.3% of total subjects showed the prism effect out of the tolerance range. This data indicates that group A and B that are less likely adjustable by fitting induce more prism than group C and D in horizontal and vertical components. Conclusions: In higher refractive error condition, it was found that aligning the optical center of lenses with the center of pupils by pre-fitting of glasses frame minimized prism induction in horizontal and vertical components, which ameliorates ocular fatigue. Therefore, appropriate optometric dispensing through fitting by opticians and precise design about monocular PD and monocular Oh are necessary to improve visual perception.

• Journal of Embryo Transfer
• /
• v.13 no.3
• /
• pp.277-289
• /
• 1998

To establish a system for sperm swim-up separation through sucrose layer, indiscreet sperm migration should sufficiently to block but movement of sperm shouldn't inhibit. Thus, the effects of sucrose levels in sucrose layer, incubation times and types of sucrose layer on sperm separation were examined. And the results obtained were as follows; 1. Layer of 10mM sucrose inhibited sperm swim-up migration through sucrose layer. 2. Incubation for 25 minutes without sucrose layer significantly increased sperm swim-up migration. However, incubation for 10 minutes to induce swim-up through sucrose layer significantly stimulated sperm migration and maintained sperm movement. 3. There was no significant difference between Type I and Type II in barrier effect of sucrose layer. However, sucrose layer of Type II with shorter distance of barrier was efficient for sampling. To elucidate a function of follicular fluid on sperm chemotaxis using in vitro system of sucrose layer of Type II and incubation for 10 minutes, the effects of dilution, heat treatment, and protein and lipid extracts of follicular fluid on sperm swim-up separation were examined. And the results obtained were as follows; 4. Follicular fluid stimulated sperm migration and movement, and significantly-attracted capacitated-sperm at 10% level. 5. Follicular fluid heated at 55$^{\circ}C$ for 30 minutes maintained the effect of follicular fluid stimulating sperm migration and movement. 6. Follicular protein stimulated sperm movement that was reduced by filtration of the protein. 7. Follicular lipid didn't significantly stimulate sperm migration and movement. 8. Both of follicular protein and lipid reduced the effect of follicular fluid stimulating sperm migration and movement. In conclusion, sucrose layer could be used for a barrier against indiscreet sperm migration by swim-up. And follicular fluid stimulated migration and movement of sperm and attracted capacitated-sperm through sucrose layer. Especially, heat-resistant protein of follicular fluid stimulated sperm migration.