• 대한소아치과학회지
• /
• 제24권1호
• /
• pp.112-124
• /
• 1997

According to extensive use of composite resin which have superior esthetic property, every effort on improving bonding strength between a tooth and composite resin has been continued. Acid etching technique is a method that micro-etches the tooth surface which provides bonding with composite resin possible. Recently, there were several reports that mechanical treatment obtained from air-abrasion can provide similar bonding strength with acid etching technique. So, this experimental study was designed to compare the shear bonding strength between using air-abrasion technique and using acid etching technique. Initially, bovine teeth were divided into enamel and dentin experimental groups. Respectively each group was categorized into three subgroups. One subgroup was acid etched with 35% phosphoric acid, then bonded with composite resin. The other subgroup was air-abraded with $50{\mu}m$ $Al_2O_3$ particles sprayed with 160psi air pressure using air abrasion unit(KCP-1000, A.D.T., U.SA), and composite resin was bonded. In another subgroup, composite resin was bonded after acid etching following air-abrasion. So, enamel experimental groups were made of E1 (acid etched only), E2(air-abraded only), E3(acid etched following air-abraded), and dentin experimental groups were made of D1(acid etched only), D2(air-abraded only), D3(acid etched following air-abraded). Each subgroup had 10 specimens. Dentin bonding system(Scotchbond Multi-purpose, 3M Co., U.S.A.) and composite resin(Z-100, 3M Co., U.S.A.) were applied on treated surface using 5mm diameter gelatin capsule as manufacturer's direction. After 1200 times thermocycling between $5^{\circ}C$ and $55^{\circ}C$, shear bond strength was measured in 5mm/min crosshead speed with Instron(Instron Co., U.S.A.), and also treated enamel and dentin were observed with SEM(JEOL Co., Japan). The following results were obtained: 1. In the enamel experimental groups, acid etched following air-abraded group had highest shear bond strength, but there was no significant difference compared to acid etched group. Air-abraded only group had lowest shear bond strength, and there was significant difference compared to the rest of groups. 2. In the dentin experimental groups, acid etched following air-abraded group had highest shear bond strength, but there was no significant difference compared to acid etched group. Air-abraded only group had lowest shear bond strength, and there was significant difference compared to the rest of groups. 3. In the SEM study, air-abraded enamel and dentin had irregular and rough surfaces.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.529-532
• /
• 2003

Quench behavior of resistive superconducting fault current limiters (SFCLs) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spiral shapes of identical line width, gap and margin. SFCLs were fabricated from YBCO thin films grown on two-inch diameter $Al_2O_3$ substrates under the same conditions. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, bi-spiral shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

• 한국표면공학회지
• /
• 제30권4호
• /
• pp.272-280
• /
• 1997

The Thermal Barrier Coation(TBC) to improve the that barrier and wear resistant propenrty in high temperature ofthe aircraftength between the accumlation of the aircraft engine and the automobile engine has usually the two layer structure. One is a creamic top layer for heat insulation and the other is a metal bond layer to facilitate the bond strength between the top ceramic layer and the substrate. But, the coated layers should be peeled off because of the accumulation of the thermal stress by the differance of the thermal expantion coefficient between metal and ceramics in a hrat cyclic environment. In this study, the intermediate layer by plasm spray process was introduced to reduce the thermal stress. The powders of plasm spray coating were the Yttria Stabilized Zirconia (YSZ), the Magnesia Stabillized Zirconia(MSZ) and NiCrAlY. the intermediate layer was sprayed with the powders of the bond cast for the purpose of test were executed. The high temperature wear resistance tends to decreasnceee wear and thermal shock test were exeucuted. The high temperature were resistance of the YSZ TBC is better that of the MSZ TBC. The wearrsistance tends to decrease accoring to incresing the temperature between $400^{\circ}C$to $600^{\circ}C$. The thermal shock life of the 3 layer TBC with YSZ top casting was the most outstanding thermal shock rsisstasnce. This means that the intermediate layer should play an importnat roll to alleviate the diffrerence of the thermal expansion coef frcients between metallic layer and cermics layer.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2726-2732
• /
• 2014

The promoting effect of rhodium on the structure and activity of the supported Cu-Co based catalysts for CO hydrogenation was investigated in detail. The samples were characterized by DRIFTS, $N_2$-adsorption, XRD, $H_2$-TPR, $H_2$-TPD and XPS. The results indicated that the introduction of rhodium to Cu-Co catalysts resulted in modification of metal dispersion, reducibility and crystal structure. DRIFTS results of CO hydrogenation at reaction condition (P=2 MPa, $T=260^{\circ}C$) indicated the addition of 1 wt % rhodium improved hydrogenation ability of Cu-Co catalysts. The ethanol selectivity and CO conversion were both improved by 1 wt % Rh promoted Cu-Co based catalysts. The alcohol distribution over un-promoted and rhodium promoted Cu-Co based catalysts obeys A-S-F rule and higher chain growth probability was got on rhodium promoted catalyst.

• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.144-164
• /
• 1997

The purpose of this study were to investigate the chemical composition, mean particle size, linear thermal expansion coefficient and metal-bonding strength of the regular opaque powder and core powder. In this study, 4 types of ceramic powders, namely Duceram Jacket Opaque powder, Duceram Opaque powder, Vita Hi-Ceram powder, Vita VMK Paint On-88 powder were used. Chemical composition was evaluated by EDS(Energy Dispersive X-ray Spectrophotometer, Oxford QX-2000, England), particle size was measured by MALVERN Instruments(MALVERN Instruments SB. OC., U.S.A.. ad linear thermal expansion coefficient was measured by dilatometer(Motoyama, Japan). Bond strength was measured by the Universal tsting machine(Istron Co., Ltd., U.S.A.). The Results were as follows : 1. Through recognition of the relative difference in chemical composition between the core powder and the regular opaque powder, the difference in the proportion of $Al_2O_3$ in each type of material is demonstrated ; Duceram Jaket Opaque powder : 30.16%, Duceram Opaque powder : 16.60%, Vita Hi-Ceram : 63.64%, Vita VMK Paint-On 88 : 16.16%. 2. There was no significant difference in the proportion of metal-bonding materials between the core powder and the regular opaque powder. 3. In the regular opaque powder, alkaline materials were incoporated in order to increase the coefficient of thermal expansion. 4. In the particle size analysis, there was no significant difference in mean particle size or in the particle size distribution between the core powder and the regular opaque powder. 5. In the thermal expansion test for temperature range of $25-600^{\circ}C$, the regular opaque powder had higher coefficient of thermal expansion than that of core powder. 6. In the 4 point flexural bending test, there was no statistically significant difference in the mean bond strength between the core powder and the opaque powder among the Duceram products.

• 헤리티지:역사와 과학
• /
• 제47권1호
• /
• pp.18-31
• /
• 2014

관룡사 약사전에 사용된 단청안료에 대해 과학적 분석을 실시하여 사용안료의 종류와 특성을 밝혀내고, 이를 약사전 벽화 뿐만아니라 대웅전 단청에 사용된 안료와도 비교하고자 하였다. 분석결과, 적색과 녹색, 백색계열의 안료는 채색 부위에 따라 전혀 다른 종류의 안료를 사용한 것으로 나타났으며, 여러 가지 색상구현을 위해 2종류 이상의 안료를 혼합하여 일부 사용하였다. 확인된 안료의 색상별 원료광물은 적색계열의 경우, 진사(Cinnaba)와 연단(Minium), 석간주(Hematite)이며, 백색계열은 합분(Oyster shell white)과 백토(White Clay), 녹색계열은 녹염동광(Atacamite)과 뇌록석(Celadonite)이었다. 또한 흑색계열은 먹(Carbon)이나 카본블랙(Carbon Black), 황색은 황토(Yellow Ocher)이며, 청색계열은 청람석(Lazulite)으로 확인되었다. 이러한 분석결과를 관룡사 내 약사전 벽화나 대웅전 단청에 사용된 안료의 연구결과와 서로 비교했을 때, 전체적으로는 비슷한 원료광물을 사용했으나 녹색이나 백색, 황색 등의 안료들에서 서로 다른 원료광물이 가감되어 사용되었음을 일부 확인하였다. 결국 같은 시기, 같은 사찰내에서도 회화의 종류나 대상건물에 따라 안료의 원료광물은 선택적으로 사용될 수 있다는 것을 보여주는 결과이다.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.240-246
• /
• 2016

In order to improve the high-temperature oxidation stability, sintered 434L stainless steel is studied, focusing on the effect of the addition of metallic oxides to form stable oxide films on the inner particle surface. The green compacts of Fecralloy powder or amorphous silica are added on STS434L and oxidized at $950^{\circ}C$ up to 210 h. The weight change ratio of 434L with amorphous silica is higher than that of 434L mixed with Fecralloy, and the weight increase follows a parabolic law, which implies that the oxide film grows according to oxide diffusion through the densely formed oxide film. In the case of 434L mixed with Fecralloy, the elements in the matrix diffuse through the grain boundaries and form $Al_2O_3$ and Fe-Cr oxides. Stable high temperature corrosion resistance and electrical resistivity are obtained for STS434L mixed with Fecralloy.

• 마이크로전자및패키징학회지
• /
• 제13권3호
• /
• pp.33-38
• /
• 2006

유리 조성이 섞인 유전체 파우더와 증류수 그리고 해교제의 혼합으로 만들어진 슬러리를 에어로졸 형태로 고압 스프레이 건으로 기판에 스프레이 코팅 하였다. 기판으로는 알루미나 기판과 전극 패턴이 프린트 된 그린쉬트를 사용하였다. 슬러리 점도와 스프레이 건에 의한 분사모양 그리고 슬러리의 분사량은 코팅 층의 코팅 속도에 영향을 끼쳤으나 밀도에는 거의 영향을 주지 않았다. 고압 스프레이 코팅 방법은 기판에 직접적인 가압 과정이 없으므로 내부 전극은 인쇄된 형태가 유지되었다. 최적 조건에서는 균일하고 조밀한 코팅 층을 얻을 수 있었다. 또한 그린쉬트에 적층 공정을 사용한 기존의 방법과는 달리 고압 스프레이 코팅 방법은 $20{\sim}50{\mu}m$의 얇은 유전체 층을 얻을 수 있었다.

• 한국가스학회지
• /
• 제19권5호
• /
• pp.20-28
• /
• 2015

탄화수소 선택적 촉매환원공정에서 ${\gamma}$-알루미나에 지지된 금속 산화물 촉매의 크기 및 형태에 따른 질소산화물 ($NO_x$) 저감 특성에 대해 조사하였다. 환원촉매로는 Ag, Cu 및 Ru를 사용하였으며, n-heptane을 환원제로 사용하였다. Ag/${\gamma}$-$Al_2O_3$ 촉매의 경우 온도범위 $250{\sim}400^{\circ}C$에서 20 nm>50 nm>80 nm 순으로 Ag의 크기가 작을수록 $NO_x$ 전환효율이 높게 나타났다. 금속 산화물 촉매의 형태에 따른 영향은 구형과 선형에 대해 살펴보았다. Ag와 Cu는 동일한 조건에서 선형이 구형보다 $NO_x$ 전환효율이 높은 것으로 나타났으나, Ru의 경우에는 형태에 따른 영향이 거의 관찰되지 않았다. 사용된 금속산화물 촉매 중에서 Ag를 사용했을 때 $NO_x$ 저감효율이 가장 높았으며, 선형의 Ag를 사용했을 때 $300^{\circ}C$의 반응온도에서 대부분의 $NO_x$를 제거할 수 있었다. Cu와 Ru 촉매상에서는 NO가 환원되기보다는 $NO_2$로의 산화반응이 우세하여 전체적으로 $NO_x$ 저감효율이 낮게 나타났다.

• 암석학회지
• /
• 제1권1호
• /
• pp.1-24
• /
• 1992

경기육괴 중앙부의 가평-청평 일대에 분포하는 선캠브리아의 변성암류는 호상편마암, 안구상편마암, 우백질편마암, 규질편암, 규암 등으로 주로 구성되며, 대리암, 각섬암, 사문암이 소량 산출한다. 변성퇴적알류치 광물조합은 규선석이 없는 것, 규선석이 있는 것, 그리고 규선석과 미사장석이 공존하는 것으로 나된다. 규선석의 존재여부에 따라 구성광물들이 성분의 차이를 보이며, 특히 사장석과 석류석의 경우 규선석과 공존할 때 상대적으로 Ca의 함량이 많다. 세개의 표품에서 남정석이 산출하며, 그 중 한 표품에서 남정석과 규선석이 공존한다. 따라서 이 지역의 변성암류는 중압상계에 해당하는 변성작용을 받았음을 알 수 있다. 석류석-흑운모 지온계, 석류석-각섬석 지온계, 그리고 석류석-Al$_2$ $SiO_{5}$-석영-사장석 (GASP) 지압계 등과 변성광물간의 상평형관계를 이용하여 추정한 최고 변성조건은 각각 규선석이 없는 경우 618-674$^{\circ}C$와 6.5$\pm$2.0 kbar이며, 규선석이 있는 경우는 701-74$0^{\circ}C$와 4.4$\pm$0.8 kbar이다. 남정석의 규선석으로의 상변화, 상부각섬석상에 속하는 광물조합의 존재, 그리고 백운모, 녹니석, 양기석 등의 산출로 특징지워지는 후퇴변성작용으로부터 연구지역의 변성암류가 시계방향의 압력-온도-시간 경로를 겪었음을 알 수 있다.