• Title/Summary/Keyword: bypass flow

Search Result 326, Processing Time 0.025 seconds

심방점액종 -2례 보고- (Atrial Myxoma -2 Cases report-)

  • 심재영
    • Journal of Chest Surgery
    • /
    • 제23권3호
    • /
    • pp.501-506
    • /
    • 1990
  • Cardiac myxomas are most common benign tumor and comprise approximately 50% of all primary cardiac neoplasms. They are intracavitary tumors occurring within any of the cardiac chambers, but they have a predilection for the atria and particularly the left atrium. Its are usually arise from the region of the limbus of the fossa ovalis. Clinically, they present with various manifestations due to obstruction to blood flow, embolization, and constitutional changes. Excision with the aid of cardiopulmonary bypass has been established as the treatment of choice for these histologically benign, but potentially malignant tumors and has generally produced good results [17]. We have experienced two cases atrial myxomas, one is left, the other is right and resected under established cardiopulmonary bypass, so we report these cases with the review of the literature.

  • PDF

태양광 시스템의 최대 전력지점 추적(MPPT) 정확도 향상을 위한 모델링 (Improved Model for Maximum Power Point Tracking (MPPT) of Solar System)

  • 이영현;이종환
    • 반도체디스플레이기술학회지
    • /
    • 제21권1호
    • /
    • pp.114-118
    • /
    • 2022
  • The photovoltaic system is affected by various conditions such as temperature and irradiance. Because non-uniform irradiation and partial shading conditions affect the entire string of cells connected in series, a bypass diode is used to bypass the current flow normally. In order to find the maximum power point in partial shade conditions, it is necessary to estimate various methods of maximum power point tracking. In this paper, the hybrid method of MPPT using Lambert W function and perturbation & observation algorithm is proposed under partial shading conditions. The simulation results are obtained using MATLAB/Simulink and shows the improvement of the accuracy of MPPT.

핫가스 바이패스 유량에 따른 산업용 냉각기의 온도제어 특성 (Characteristics of Temperature Control by Hot-gas Bypass Flow Rate on Industrial Water Cooler)

  • 백승문;최준혁;변종영;문춘근;이호생;정석권;윤정인
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권8호
    • /
    • pp.1129-1136
    • /
    • 2009
  • 본 논문은 EEV를 이용한 냉각시스템의 성능특성에 관한 논문이다. 산업용냉각기는 고속으로 운전하는 공작기기의 열 변형을 줄이기 위해 사용되었으며, EEV는 냉각기의 용량조절을 위해 사용되었다. 본 장치는 압축기 출구에서 나온 핫가스를 증발기 입구로 보내는 핫가스 바이패스 시스템을 위해 설계되었다. 본 실험은 PID제어를 통한 고정도 온도제어 연구의 중간결과물이다. 실험의 결과로 핫가스 바이패스의 EEV스텝 조절을 통하여 증발압력의 상승과 냉동능력의 감소를 알 수 있었다. 본 실험의 결과를 통하여 효율적인 냉각기의 설계에 있어 기초 자료로 이용할 예정이다.

하나로 수조 방사선 준위의 저감 특성 (Reduction Characteristics of Pool Top Radiation Level in HANARO)

  • 박용철
    • 한국유체기계학회 논문집
    • /
    • 제5권1호
    • /
    • pp.49-54
    • /
    • 2002
  • HANARO, 30 MW of research reactor, was installed at the depth of 13m in an open pool. The $90\%$ of primary coolant was designed to pass through the core and to remove the reaction heat of the cote. The rest, $10\%$, of the primary coolant was designed to bypass the core. And the reactor coolant through and bypass the core was inhaled at the top of chimney by the coolant pump to prevent the radiated gas from being lifted to the top of reactor pool. But, the part of core bypass coolant was not inhaled by the reactor coolant pump and reached at the top of reactor pool by natural convection, and increased the radiation lovel on the top of reactor pool. To reduce the radiation level by protecting the natural convection of the core bypass flow, the hot water layer (HWL, hereinafter) was installed with the depth of 1.2 m from the top of reactor pool. As the HWL was normally operated, the radiation level was reduced to five percent ($5\%$) in comparing with that before the installation of the HWL. When HANARO was operated at a higher temperature than the normal temperature of the HWL by operating the standby heater, it was found that the radiation level was more reduced than that before operation. To verify the reason, the heat loss of the HWL was calculated by Visual Basic Program. It was confirmed through the results that the larger the temperature difference between the HWL and reactor hall was, the more the evaporation loss increased. And it was verified that the radiation level above was reduced mote safely by increasing the capacity of heater.

하나로 수조 방사선 준위의 저감 특성 (Reduction Characteristics of Pool Top Radiation Level in HANARO)

  • 박용철
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.221-226
    • /
    • 2001
  • HANARO, 30MW of research reactor, was installed at the depth of 13m of open pool, The $90\%$ of primary coolant was designed to pass through the core and to remove the reaction heat of the core. The rest $10\%$, of the primary coolant was designed to bypass the core. And the reactor coolant through and bypass the core was inhaled at the top of chimney by the coolant pump to protect that the radiated gas was lifted to the top of reactor pool. But, the part of core bypass coolant was not inhaled by the reactor coolant pump and reached at the top of reactor pool by natural convection and increased the radiation level on the top of reactor pool. To reduce the radiation level by protecting the natural convection of the core bypass flow, the hot water layer (HWL, hereinafter) was installed with the depth of 1.2m from the top of reactor pool. As the HWL was normally operated, the radiation level was reduced to five percent ($5\%$) in comparing with that before the installation of the HWL. When HANARO was operated with higher temperature than the normal temperature of the HWL by operating the standby heater, it was found that the radiation level was more reduced than that before operation. To verify the reason, the heat loss of the HWL was calculated. It was confirmed through the results that the larger the temperature difference between the HWL and reactor hall was, the more the evaporation loss was increased. And it was verified that the radiation level above was reduced more safely by increasing the capacity of heater.

  • PDF

A Study on the Flow Field Characteristics of Air Induction System for Reducing the Signal-to-Noise in the MAFS Output

  • 유성출
    • 한국분무공학회지
    • /
    • 제5권1호
    • /
    • pp.49-57
    • /
    • 2000
  • This study presents the flow visualization results, velocity and turbulence intensity measurements made within an air filter cover and entry region of a mass air flow sensor (MAFS) which is used in an induction system of 3.8L engine. Flow structure in two air filter cover assemblies were examined. The first was a clear plastic replica of the production cover while the second was a modified clear plastic cover with a geometry configured to reduce fluctuations. High speed flow visualization and laser doppler velocimetry (LDV) systems were used to reveal and analyze the flow field characteristics encountered in the sensor design process under steady flow conditions. A 40-watt copper vapor laser was used as a light source. Its beam is focused down to a sheet of light approximately 1.5mm thick. The light scattered off the particles was recorded by a 16mm high speed rotating prism camera at 5000 frames per second. A comparison of the flow patterns and LDV measurements in the original and modified air filter covers is presented to illustrate the controlling effect of the cover design on the turbulence structure formation near the bypass and on the sensor output signal. In both axial and radial planes of the main passage it was found that the turbulence flow pattern is remarkably influenced by the air filter cover and main passage configuration.

  • PDF

속가슴동맥 편 및 속가슴동맥-노동맥 복합이식편의 자유혈류 (Free Flow in Internal Thoracic Artery and Internal Thoracic Artery-Radial Artery Composite Graft)

  • 고광표;이미경;류대웅;이삼윤;최종범
    • Journal of Chest Surgery
    • /
    • 제37권10호
    • /
    • pp.839-844
    • /
    • 2004
  • 배경 및 목적: 속가슴동맥 편과 유리 노동맥 편의 Y-복합이식편은 관상동맥우회 술에 많이 이용된다. 이 연구의 목적은 속가슴동맥 편의 혈류를 증가시킬 수 있는 방법을 찾고 Y-복합이식편의 혈류역학을 알고자 함이다. 대상 및 방법: 관상동맥우회 술을 받은 15예에서 속가슴동맥 편을 두 가지 방법으로 처치하여 속가슴동맥 혈류량을 측정하였다. 7예에서는 혈관 외부에만 파파베린 액을 처치하였고 8예에서는 혈관 내로 파파베린 액을 주입하였다. 다른 18예에서는 속가슴동맥 편과 유리 노동맥 편으로 Y-복합이식편을 만들어 사용하였고 그 자유 혈류량과 두 분지의 혈류 변화를 조사하였다. 결과: 속가슴동맥 편의 혈관 내로 파파베린을 주사한 경우는 혈관외부에 파파베린을 처치한 경우보다 약 2배의 자유혈류량을 얻을 수 있었다(47.7$\pm$9.6 mL/min와 100.8$\pm$26.3 mL/min, p<0.001). Y-복합이식편의 양측을 다 연 상태에서 총 자유혈류량은 속가슴동맥 측만을 열었을 때나 노동맥 측만을 열었을 경우보다 훨씬 많았다(173.3$\pm$45.3 mL/min와 121.1$\pm$34.3 mL/min 혹은 117.5$\pm$42.8 mL/min, 각각 p<0.001). Y-복합이식편의 양 분지를 다 연 경우 양측의 혈류량은 차이가 없었다(85.4$\pm$27.8 mL/min와 87.9$\pm$42.4 mL/min, p=0.772). Y-복합이식편에서 한 측의 혈류량은 다른 측을 열 때보다 막을 때 훨씬 많았다. 결론: 속가슴동맥 편의 혈관 내에 파파베린 액을 주입하는 방법은 자유혈류량을 올릴 수 있는 매우 효과적인 방법이다. 속가슴동맥 편과 유리 노동맥 편의 Y-복합이식편은 속가슴동맥의 단독이식편보다 더 많은 자유혈류량을 보이며, Y-복합이식편의 한 측의 혈류량은 다른 측의 혈류량의 변화에 따라 변할 수 있다.

Hollow Fiber Oxygenator에서 Inside Blood Flow Type과 Outside Blood Flow Type의 임상적 비교 (Clinical Comparison Between Inside Blood Flow Type and Outside Blood Flow Type in the Hollow Fiber Oxygenator)

  • 안재호
    • Journal of Chest Surgery
    • /
    • 제25권5호
    • /
    • pp.451-457
    • /
    • 1992
  • The hollow fiber oxygenator is the most advanced one for the cardiopulmoanry bypass. They have two different types of the hollow fiber systems according to the way how the blood go through the fibers. One is inside blood flow type and the other outside type. In order to find out which is better to prevent blood cell destruction, we selected 40 valve replacing patients and divided them into 2 groups prospectively. In group I [n=20], inside blood flow type[BCM-7a], CO2 excretion is more effective than group II, that is partly because of the relative large surface area of the BCM-7. In group II [n=20], outside blood flow type [MAXIMAa], they have better quality to preserve platelet count. We also studied about several other items such as SaO2, Hemoglobin and RBC, WBC, fibrinogen, LDH, plasma hemoglobin, haptoglobulin and so on. But we cannot find any differences between two groups with any statistical meanings [p<0.05]. We conclude that both of two oxygenators are excellent in the aspects of gas exchange and blood cell preservation.

  • PDF

죽상 동맥 경화성 뇌혈관 폐색 환자에서의 두개외강-내강 우회로술 후의 혈관 영역별 연속 혈류역학 변화 (The Serial Change of Cerebral Hemodynamics by Vascular Territory after Extracranial-Intracranial Bypass Surgery in Patients with Atherosclerosis of Cerebral Arteries)

  • 홍일기;김재승;안재성;권순억;임기천;이재현;문대혁
    • Nuclear Medicine and Molecular Imaging
    • /
    • 제42권1호
    • /
    • pp.8-16
    • /
    • 2008
  • 목적: 내경동맥 또는 중대뇌동맥의 죽상 동맥 경화증 환자에서의 두개외강-내강 우회로술(이하 우회로술) 후의 연속적인 혈류 역학적 변화를 $^{99m}Tc$-ECD 아세타졸아마이드 부하 뇌혈류 단일 광자 방출 전산화 단층 촬영(이하 아세타졸아마이드 부하 SPECT)으로 평가하여 중대뇌 동맥의 각 분지별 영역에 대한 우회로술의 혈류역학적 개선효과를 알아보고자 하였다. 대상 및 방법: 전향적 방법으로 최근 3개월 내에 혈관 폐색성 징후가 발생하여 우회로술을 시행받은 환자를 대상으로 수술 전과 수술 1 주 후, 3-6 개월 후에 아세타졸아마이드 부하 SPECT를 시행하였다. 영상 분석을 위해 SPM의 SPECT 표준 뇌에 공간 정규화한 후 Anatomical Automated Labeling으로 중대뇌동맥의 지배를 받는 양측 전두, 측두, 두정 영역에 관심 구역을 설정하여 각 관심 영역별로 뇌혈류 지표(PI; $C_{region}/C_{ipsilateral\;cerebellum}$) 및 뇌혈관 예비능 지표$((PI_{acetazolamide}-PI_{basal})/PI_{basal})$로 정하여 이들 지표의 수술 전후 변화를 평가하였다. 결과한 측에 성공적인 우회로술을 시행한 환자 17 명(남:여=12:5, 나이 $53{\pm}2$세)을 분석하였다. 전체적으로 뇌혈류는 수술 1 주 후 유의하게 증가하나 3-6 개월 후 감소하여 수술 이전의 수준으로 유지되었으며 ($1.01{\pm}0.09{\rightarrow}1.06{\pm}0.09}{\rightarrow}1.02{\pm}0.10,\;p=0.005$) 뇌 혈관 예비능은 수술 1 주 후 유의하게 증가한 이후 유의하지는 않으나, 3-6개월 이후까지 계속 호전되었다($-0.14{\pm}0.05{\rightarrow}-0.07{\pm}0.04{\rightarrow}0.05{\pm}0.05,\;p=0.004$). 각 뇌 영역별로 뇌혈류는 두정 영역에서 수술 직후 증가하였다가($1.12{\pm}0.09{\rightarrow}1.18{\pm}0.09,\;p=0.003$) 수술 3-6개월 이후 감소하여($1.12{\pm}0.09,\;p=0.003$) 수술 이전의 수준으로 유지되었다. 뇌혈관 예비능은 수술 측의 전두 영역($-0.15{\pm}0.07{\rightarrow}0.08{\pm}0.05$), 두정 영역($-0.16{\pm}0.07{\rightarrow}-0.07{\pm}0.05$)에서 모두 수술 직후 유의하게 증가하였고(p<0.01) 이후 유의하지는 않으나 3-6개월까지 계속 호전되었다. 결론: 성공적인 우회로술 후 뇌혈류는 전체적으로 유의한 변화가 없었으나 뇌혈관 예비능은 중대뇌동맥 영역 전체에 걸쳐 수술 후 단기간에 유의한 호전을 보였으며 장기간 유지되었다. 따라서 뇌혈관 예비능의 호전여부는 우회로술에 의해 증가된 뇌관류압을 평가할 수 있는 중요한 지표로 생각되며 향후 우회로술에 의한 뇌졸중 재발방지 효과를 알아보기 위해 뇌혈관 예비능의 변화와 예후와의 상관관계에 대한 연구가 필요하리라 생각된다.

이중 효용과 일중 효용을 복합한 다단 재생 고효율 흡수식 냉동 사이클 개발 (Development of High Efficiency Cycle by Combining Double-Effect with Single-Effect Absorption Chiller Systems)

  • 윤상국
    • 설비공학논문집
    • /
    • 제29권7호
    • /
    • pp.360-365
    • /
    • 2017
  • Recently, development efforts of triple-effect absorption chiller have been increased in order to improve the efficiency of double-effect absorption chiller. However, triple-effect absorption chiller has some disadvantages, including high corrosion characteristic of LiBr solution at high temperature of $200^{\circ}C$. Moreover, it is necessary to develop new components for operation under high pressure of 2 bars even though COP is increased to 1.6 or 1.7. The objective of this study was to introduce a new system by combining double effect absorption chiller with single effect absorption chiller with multi-generators using bypass flow of LiBr dilute solution to $3^{rd}$ generator to overcome the disadvantages of triple-effect chiller and improve energy efficiency. Results indicate that the new absorption cycle had a much higher efficiency than double-effect chiller system, showing significant improvement when bypass solution flow rate of 25% was applied to the $3^{rd}$ generator using the main dilute solution of the absorber. The COP of the new chiller system was found to be 1.438, which was 21.7% higher than that (1.18) of the present double-effect system. The COP was decreased when solution by-pass rate to the $3^{rd}$ generator was increased. In addition, lower cooling water temperature caused higher COP. Therefore, the multi-generator system with by-pass solution might be an excellent chiller alternative to triple-effect absorption chiller with higher efficiency.