• 대한핵의학회:학술대회논문집
• /
• 대한핵의학회 2004년도 추계학술대회 및 총회
• /
• pp.389.1-389.1
• /
• 2004

• Journal of Chest Surgery
• /
• 제15권2호
• /
• pp.259-265
• /
• 1982

We have designed a new type of bubble oxygenator (KOREA-KIM VENOTHERM OXYGENATOR) made of PVC sheet and deforming mesh incorporated in the heat exchanger, and evaluated in experimental animal for the analysis of it`s efficiency. The Oxygenator has low priming volume with high flow rate up to 6 L/rain, and efficiency of heat exchanger was excellent as 1-$1.5^{\circ}C.$ using total cardiopulmonary bypass method under moderate to deep hypothermia. Average priming volume of 1317 ml with 30% hemodilution method was perfused with an average of 1.1-3.0 L/min.$M^2$of arterial blood and pure oxygen at a rate of 2-3.4 L/min for 49.6 minutes continuously in average. During total cardiopulmonary bypass, average $PaO_2$ was $159.8{\pm}60$mmHg, $PaCO_2$ $41.0{\pm}3$mmHg respectively under $SaO_2$ over 96% with systolic arterial pressure of 70 mmHg and CVP of 5-10 cm$H_2O$. Plasma free Hemoglobin was $7.0{\pm}4$ mg/dl with 25% drop of hemoglobin and hematocrit at the end of cardiopulmonary bypass. This KKV Oxygenator was observed to have excellent capabillty of oxygen and carbon dioxide gas transfer with small amount of blood trauma, and the efficiency of heat exchanger was satisfactory during cooling and rewarming of the bubbled blood. Disadvantages have included the somewhat poor deforming effect due to loose PVC fiber mesh, the extracompact character of Teflon filters, and the rough inner surface of the heat exchanger copper pipes.

• Journal of Chest Surgery
• /
• 제37권2호
• /
• pp.176-179
• /
• 2004

30세 여자 환자가 어지러움증과 심계항진을 주소로 입원하였다. 양측 상지 및 양측 총경동맥에서 맥박이 촉지되지 않았으며, 대동맥 조영술상 무명동맥과 양측 총경동맥이 심하게 좁아져 있었고 양측 쇄골하동맥은 완전 폐쇄되어 있었다. 제Ⅰ형의 Takayasu 동맥염으로 진단하고 뇌 혈류 개선과 양측 상지의 혈류 개선을 위해 수술을 시행하였다. 4개의 서로 다른 절개를 통해 상행 대동맥, 양측 경동맥, 양측 쇄골하동맥, 양측 액와동맥을 노출시키고 인조 혈관을 이용하여 상행 대동맥-양측 총경동맥-양측 액와동맥 간의 우회술을 시행하였으며, 수술 후 어지러움증과 심계항진은 사라졌다.

• Journal of Chest Surgery
• /
• 제28권1호
• /
• pp.73-77
• /
• 1995

We are reporting one case of right subclavian vein thrombotic occlusion as a result of previous hemodialysis catheter placement in a patient with a functioning right brachio-cephalic arteriovenous fistula. Its complication was painful right arm swelling, limitation of motion and cellulitis. Diagnosis was confirmed by right subclavian venography and the complication was successfully managed by right subclavian vein-superior vena cava bypass with a GoreTex vascular graft. The arteriovenous fistula had remained to protect patency of the bypass at first, but two months later after the operation, the arteriovenous fistula had to be occluded because of the heart failure resulting from shunt over flow. After ligation of arteriovenous fistula, heart failure improved, and uncomfortable arm swelling did not develop again.

• 한국광학회지
• /
• 제27권6호
• /
• pp.218-222
• /
• 2016

레이저 다이오드 TO 패키지 내부의 주요 부분과 히트싱크 구조의 열전달 특성을 전산모사를 통해 분석하고, 개선구조의 효율적 적용방안을 제안하였다. 열 병목 현상을 개선하기 위해, 레이저 다이오드 상부에 열 우회를 도모할 수 있는 방열구조물을 설치하는 것을 제안하였고, 열저항 단순모델 기대치와 비교하여 그 우회 효율 개선 정도를 더욱 향상시키는 적용 범위를 파악하였다. 열 병목을 감안하여 방열 도움 구조물을 적절히 추가함에 따라, 통상적인 기대 수준보다 더욱 향상된 열 우회 효율을 얻을 수 있었음을 보고한다.

• 한국물환경학회지
• /
• 제20권2호
• /
• pp.132-144
• /
• 2004

The purpose of this study was to evaluate alternatives for stable operation of WWTP(Wastewater Treatment Plant) with a higher rate of inflows and a higher concentration of pollutants during wet weather to minimize the pollution loads being discharged into receiving waters. 3Q(Q: dry weather flow) of a base flow is normally intercepted and flows into WWTP as it was current practice. It is revealed by simulation that the bypassing alternative of 1Q through secondary treatment and 2Q into the stream after primary treatment was as good as it is expected. The bypass pollution loads were in the range of 23.9 ~ 38.5 % of the total loads flowing into the WWTP indicating that the bypassed flows need an extra treatment such as stormwater detention reservoir, high-rate coagulation with sedimentation, and step-feed. The high-rate coagulation with sedimentation was the most effective with respect to removal of the pollution loads.

• Journal of Chest Surgery
• /
• 제45권6호
• /
• pp.351-367
• /
• 2012

This second report in the series on coronary artery bypass presents the authors experience and personal views on the internal thoracic artery (ITA) which date to 1966. There has been a very gradual evolution in the acceptance of this conduit which was initially compared with the saphenous vein and viewed as an improbable alternative to it. As is common with concepts and techniques which are 'outside the box' there was skepticism and criticism of this new conduit which was more difficult and time consuming to harvest for the surgeon who had to do it all. It was viewed as small, fragile, spastic and its flow capacity was questioned. Only a few surgeons employed it because of these issues and some of them would frequently graft it to the diagonal artery as it was thought not to supply adequate flow for the left anterior descending unless it was small. After a decade, angiographic data revealed superior patency to vein grafts. Even this evidence and survival benefit reported a few years later did not convince many surgeons that their concerns about limitations justified its use. Thus widespread adaption of the ITA as the conduit of choice for the anterior descending required another decade and bilateral use is only now expanding to more than 5% of patients in the US and somewhat faster in other countries.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.78-81
• /
• 2009

연료펌프에 대한 수력성능시험을 상온의 물을 매질로 하여 실시하였다. 시험된 연료펌프는 개방형 가스발생기 방식의 75톤급 액체로켓엔진에 적용할 목적으로 개발 중에 있다. 시험 결과, 연료펌프는 설계요구조건을 만족하였으며, 설계 유량에서의 양정과 효율은 수치해석에서 추정된 값보다 높았다. 또한 후방 베어링의 출구 압력이 예상보다 높았는데 이는 바이패스 배관의 입구가 좁기 때문이었다. 그리고 바이패스 곡관부의 차압 측정으로 누설 유량을 유추할 수 있었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.337-344
• /
• 2000

A modified k-$\epsilon$ model is proposed for calculation of transitional boundary layer flows. In order to develop the eddy viscosity model for the problem, the flow is divided into three regions; namely, pre-transition region, transition region and fully turbulent region. The pre-transition eddy-viscosity is formulated by extending the mixing Length concept. In the transition region, the eddy-viscosity model employs two length scales, i.e., pre-transition length scale and turbulent length scale pertaining to the regions upstream and the downstream, respectively, and a university model of stream-wise intermittency variation is used as a function bridging the pre-transition region and the fully turbulent region. The proposed model is applied to calculate three benchmark cases of the transitional boundary layer flows with different free-stream turbulent intensity ( $1\%{\~}6\%$ ) under zero-pressure gradient. It was found that the profiles of mom velocity and turbulent intensity, local maximum of velocity fluctuations, their locations as well as the stream-wise variation of integral properties such as skin friction, shape factor and maximum velocity fluctuations are very satisfactorily Predicted throughout the flow regions.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.419-424
• /
• 2002

The HANARO, a multi-purpose research reactor of 30 MWth open-tank-in-pool type, has been under normal operation since its initial criticality In February, 1995. Many experiments should be safely performed to activate the utilization of the HANARO. A flow simulation facility is being developed for the endurance test of reactivity control units for extended life times and the verification of structural integrity of those experimental facilities prior to loading in the HANARO. This test facility is composed of three major parts; a half-core structure assembly, flow circulation system and support system. The flow circulation system is composed of a circulation pump, a core flow pipe, a core bypass flow pipe and instruments. The system is to be filled with de-mineralized water and the flow should be met the design flow to simulate similar flow characteristics in the core channel of the half-core test facility to the HANARO. This paper, therefore, describes an analytical analysis to study the flow behavior of the system. The computational flow analysis has been performed for the verification of system pressure variation through the three-dimensional analysis program with standard k-$\epsilon$ turbulence model and for the verification of the structural piping integrity through the finite element method. The results of the analysis are satisfied the design requirements and structural piping integrity of flow circulation system.