• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 춘계학술발표 개요집
• /
• pp.58-61
• /
• 1995

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2004년도 추계학술대회논문집
• /
• pp.78-81
• /
• 2004

• 한국실내디자인학회논문집
• /
• 제18권3호
• /
• pp.39-46
• /
• 2009

The purpose of this study is to analyze the meaning of 'dis-joint' in the works of Louis I. Kahn. Kahn tried to realize his main architectural thoughts of 'what it wants to be' and 'how it was done' through his whole life. The concept of 'dis-joint' had been developed to visualize his architectural thoughts. Kahn used' dis-joint' to show and emphasize the structural system for the raison d'etre of building. Kahn's 'dis-joint' can be categorized as 'spacing', 'butt', 'slit' and 'protrusion'. Kahn used this kind of unusual way of joint beyond simple exposure to stress the existence of element, part and building itself. Through variable combination usage of 'dis-joint', Kahn can realize his architectural thoughts into building in a concrete way. The efficiency and function of joint is not the main issue in his works. 'Dis-joint' was the concrete tool to show the tectonic of architecture and construction process to enhance its presence. Therefore 'dis-joint' of Kahn's architecture is not a joint only to combine building parts but a concrete mean to realize his thoughts in a corporeal way. These facts insinuate that Kahn's architectural philosophy is based on the thoughts of tectonic and its realization.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권6호
• /
• pp.728-735
• /
• 2003

This paper shows the possibility of performing Lap joint using the friction stir welding with $2mm^t$ aluminum alloy plate and the determination of tool-dimensions for FSW in milling machine. This research also is reported on obtaining the tensile-shear strength, 91.3 (MPa) and the energy absorption, 26.3 (J) for Lap jointed specimen. The optimal tool-dimensions and method for Lap joint using FSW is as follows; each diameter of shoulder and pin is $9\phi(mm) and 3\phi(mm)$, the length of pin is 3.6(mm), Pressing the shoulder of tool into original base metal is not reasonable.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.153-160
• /
• 2002

This paper shows the possibility of performing Lap joint using the friction stir welding and the determination of tool's dimensions for FSW in Milling machine. This research also is reported on obtaining the tensile-shear strength, 9.319 ( kgf/mm$^{2}$) and the energy absorption, 2,682 (kgf-mm) under this experiment. The optimal tool's dimensions and method for Lap joint in 2tmm aluminum alloy plate using FSW is as follows; The diameter of shoulder and pin are 9 $\phi$mm and 3$\phi$mm, the length of pin is 3.6mm. The conditions of shoulder of tool is not pressed into original base metal.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.37-38
• /
• 2023

The purpose of this study is to manufacture mortars incorporating oyster shells and install them in the form of shaped, shaped butt joints, and flat boards to see what difference there is in the back temperature depending on the joint method and the type of installation. Based on the fact that similar backside temperatures were measured regardless of the presence or absence of a joint It is judged that the joint will not affect the backside temperature if it is constructed closely, In the case of ㄱ shaped, it is believed that the backside temperature higher than the backside temperature of the flat board was measured because heat accumulates on the backside during heating.

• 한국강구조학회 논문집
• /
• 제14권2호
• /
• pp.385-394
• /
• 2002

현재, 국내에서 사용되고 있는 고강도강은 SM570 강재만이 극히 일부분 사용되고 있으며, 그 이상의 고강도강의 사용은 국내의 강교량에는 전무한 실정이다. 본 연구에서는 국내 장대교량 및 일반교량에서의 고강도강 적용의 활성화를 위해 고강도강재인 SM570 강재와 아직 교량에는 적용된 살계가 없는 POSTEN80 강재를 대상으로 횡방향 맞대기 용접연결부의 피로특성을 분석, 평가하였다. 이를 위해 소형시험편을 제작하여 일정진폭하중하에서의 인장 피로시험을 실시하였으며, 피로균열의 발생 및 진정양상, 기존의 연구결과와 비교, 분석하였다. 또한, 모재의 정적 인장강도와 판두께가 용접연결부의 피로강도에 미치는 영향을 분석하고 피로강도를 평가하므로서 고강도강인 SM570과 POSTEN80 강재의 피로특성과 에 따른 횡방향 맞대기 용접연결부에 대한 피로설계기준 제정을 위한 기초 자료를 제시하였다.

• Journal of Welding and Joining
• /
• 제21권7호
• /
• pp.34-41
• /
• 2003

Weld quality monitoring and seam tracking along the butt-joint lengthwise to the tube axis are studied. The material of tube is 60kg/$\textrm{mm}^2$ grade steel sheet, and the longitudinal butt-joint is shaped by 2 roll bending machine. The tube with a thickness of 1.5mm, diameter of 105.4mm and length of 2000mm is successfully obtained by the $CO_2$ laser welding system equipped with a seam tracker and plasma sensor. Experimental results show that the developed welding system can be used for the precision seam tracking and the real-time monitoring of weld quality, and the laser welded tube can be used for car body md component after tubular hydroforming.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.18-20
• /
• 2003

Optimal processing and system to produce the laser welded tube for one body formed bumper beam are studied. The calculated size of tube is a thickness of 1.4mm, diameter of 105.4mm and length of 2000mm. The tube is shaped from cool rolled high strength steel sheet(tensile strength: 60kgf/$\textrm{mm}^2$ grade). Two roll bending method is the optimal tube shaping process compared to UO-bending, bending on press brake, multi-step continuous roll forming and 3 roll bending methods. Weld quality monitoring and seam tracking along the butt-joint lengthwise to the tube axis are also studied. The longitudinal butt-joint is welded by the $CO_2$ laser welding system equipped with a seam tracker and plasma sensor. The constructed $CO_2$ laser tube welding system can be used for the precision seam tracking and the real-time monitoring of weld quality. Finally, the obtained laser welded tube can be used for one-body formed automobile bumper beam.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.59-59
• /
• 2010

Friction stir welding has become a viable and important manufacturing alternative or fabrication component, especially in aerospace and automobile applications involving aluminium alloys. In recent years, there is an increasing interest for FSW of dissimilar metals and alloys, particularly systems which are difficult to weld by conventional, thermal (or fusion) welding. In this study we tried to analyse the complex heat distribution occurring in TIG assisted FSW of dissimilar butt joint (STS304 and Al6061). For this, an analytical model for heat generation by FSW based on contact conditions has been developed. The heat input was calculated considering the coefficient of friction and slip factor between each work piece material with the tool material. The thermal model is used to generate the temperature characteristics curve, which successfully predicts the maximum welding temperature in each alloys. The analysis was carried out using the in-house solver.