• 전기의세계
• /
• v.27 no.1
• /
• pp.35-44
• /
• 1978

In this paper the best way of servicing to the waiting guests at the Express Bus Terminal, is to determined by the computer simulation. The mathematical model for the waiting guests is formulated with the statistics data by researching the waiting lines of the guests at the guests at the specified Express Bus Terminal. The waiting phenomena is simulated using Monte Carlo method to decide the proper number of window and the time for servicing. Finally it present the way of the improvement of service with the good results of simulation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1947-1955
• /
• 1989

With the increasing complexity of cabling at sensory level in process control and manufacturing automation, field buses were introduced to replace the traditional point to point links from each sensor or acruator to its controlling equipments by a single link on which all information is transmitted seriall and multiplexed in time. In this papr, we introduce the BITBUS network as a field bus. For the service discipline of the BITBUS network, two service strategies are proposed to obtain the performance of the network. They are the equal priority cyclic service strategy and the non-equal priority cyclic service strategy. The former assigns equal priority to each node for polling and the latter assumes non-equal priority. The BITBUS network was modeled as a cyclic queueing model and it is analyzed by two methods: the Kuehn's and the Boxma's. Computer simulation was also done for the cyclic queueing model and simulation results were compared with those. Under mathematically non-analyzable environment, only the computer simulation was done. From the simulation result, in order to meet the response time requirement of 5 msec imposed by International Electrotechnical Commission when each node has the average traffic of 5000 messages/sec in manufacturing automation the number of slave nodes should be smaller than 10 at the transmission rate of 2.5 Mbps.

• Information and Communications Magazine
• /
• v.13 no.3
• /
• pp.61-70
• /
• 1996

In this paper, the architecture of the LAN Emulation service defined by the ATM Forum is introduced. In order to use the vast base of the existing LAN application software in ATM network. LAN Emulation provides a MAC layer service emulating connectionless services of legacy LANs on ATM networks. LAN Emulation forms a logical overlay network, called and emulated LAN, on top of an ATM network. LAN Emulation service comprises a set of LAN Emulation Clients(LECs) residing in end stations of an emulated LAN and three logical service entities : LAN Emulation Configuration Server (LECS), LAN Emulation Server(LES). and Broadcast and Unknown Server(BUS). LEC utilizes the services provided by these three servers to provide seamless interworking between legacy LANs and ATM networks, and to support transparent communications between LAN applications over ATM.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.241-246
• /
• 2010

This study is to estimate the link travel time of road networks in urban areas utilizing traffic information which is collected throughout the operation of Bus Information System (BIS). BIS, which applies the hightech information technology to an existing bus system, has been developing and operating in many bodies including the local self-government entities. However, a study to consider the technology trend is relatively rare. Even though some useful traffic informations have been collected throughout the operation of an existing BIS, which set limits to the development of a future service of integrated analysis. Accordingly, in this study, a fundamental research is performed for traffic controls in urban areas and providing a traffic information for driver throughout the estimation of link travel time of road networks. The study is proceeded throughout the data collected from the operation of BIS (Bus Information System). The result showed that the patterns of going through traffic were divided up to 2 in the bus travel time in BIS then estimate two link travel time.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.715-728
• /
• 2009

The Enterprise Service Bus based on Java Business Integration is an web service standard and one of the methods for implementing distribution channels of Service Oriented Architecture. Consisting of open source group, extensive venders and users, the ESB based JBI has the problems of ineffectiveness as well as advantages of extensibility of service plug-in. That is, in case users need to use Service plug-in, manual connection of packaging process and sequential distribution method is required. This study, therefore, proposes as a way of trouble-shooting the user-oriented component deployment tool which can manage entire process for deploying The ESB middleware platform to Service unit. At the same time, this study elicited the requirements based on issues of JBI-based ESB and has developed the modeling property, packaging, distribution and evaluation thru Schema analysis of JBI-compatible component. Using the deployment tool this study proposed, users will be able to perform and manage the whole deploying process without additional manual work for connecting component. Not only it is expected that interface based on Graphic User Interface provide usability and convenience but they can also minimize the errors rate through component and route validity verification function provided in deployment tool.

• Journal of KIISE:Software and Applications
• /
• v.35 no.2
• /
• pp.91-104
• /
• 2008

Service-Oriented Computing (SOC) is the development method that published services are selected and composed at runtime to deliver the expected functionality to service clients. SOC should get maximum benefits not only supporting business agility but also reducing the development time. Services are selected and composed at runtime to improve the benefits. However, current programming language, SOC platforms, business process modeling language, and tools support either manual selection or static binding of published services. There is a limitation on reconfiguring and redeploying the business process to deliver the expected services to each client. Therefore, dynamic selection is needed for composing appropriate services to service clients in a quick and flexible manner. In this paper, we propose Dynamic Selection Handler (DSH) on ESB. we present a design method of Dynamic Selection Handler which consists of four components; Invocation Listener, Service Selector, Service Binder and Interface Transformer. We apply appropriate design patterns for each component to maximize reusability of components. Finally, we describe a case study that shows the feasibility of DSH on ESB.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.19-33
• /
• 2019

There have been enormous efforts to develop an innovative public transport bus service for enhancing its operational efficiency based on Automated Vehicle(AV). However, since the vehicle operating environment in the public transport system varies with the purpose and method of mobility service, it is necessary to preferentially evaluate the current roadworthiness for an effective way to introduce the AV. Therefore, this study classified and redefined AV-based mobility service based on literature reviews. This research conducted the roadworthiness test for checking the feasibilities of the AV-based mobility services. Furthermore, we suggested some deployment strategies of the AV-based mobility service considering the Level-Of-Service (LOS) of road infrastructure based on the results of roadworthiness tests. The proposed direction would have a great potential to introduce the AV-based public transport system in the near future.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.7-18
• /
• 2002

To activate public transportation service, Bucheon City built Bus Information System based on Beacon type, and operates it for no.22 line. This research analyzes an effect of BIS operations, and mainly it analyzes far reliability evaluation of bus arrival time information and passenger satisfaction about BIS. As results of reliability evaluation of arrival time information service, it is proven to be practically inappropriate to use as arrival time data because it is not only travel time between each bus stop but also previous travel time history data. In order to improve this matter, neural network model was evaluated as the most outstanding one as result of experiment in applying current arrival time Prediction model. This research cannot help limiting for evaluation of operation effect in Bucheon City because there is no Bus Information System based on GPS type in Korea. For the future ITS model city, in the case of building ITS model city based on GPS type, it is possible to compare two systems relatively. In addition to that, fur the consideration of reliability of bus arrival time information, it is required to develop Predictable model and research factors that affect to bus operation.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.1-11
• /
• 2016

Public transportation is public service that is contributed to the convenience of the public. However, opportunity for public services in rural areas is weaker than the chance in urban areas. The purpose of this study is to evaluate accessibility of various public facilities using public transportation. To evaluate the accessibility, we calculate the various time from community center to the nearest bus stop, walking time, riding time in bus, and waiting time for transfer. The results of this study ares as follows; (1) Villages occupy 19.8% in rural areas that walking time from community center to the nearest bus stop takes over 10 minutes in integrated Chungju-si; (2) The average speed is 21.9 km/hr estimated to departure and arrival time of bus route; (3) The accessibility time from community center using the average bus speed takes 15.43 minutes to public facilities, 35.15 minutes to emergency center, 8.70 minutes to medical center, 9.70 minutes to elementary school, 16.26 minutes to middle school, and 22.61 minutes high school; (4) The transfer time of public transportation takes 13.46, 21.96, 10.48, 7.78, 11.11, 16.10 minutes to public facilities, emergency center, medical center, elementary school, middle school, and high school, respectively; (4) Traffic accessibility using bus vehicles in the East and South Chungju-si is lower than areas in the West and North Chungju-si. Some villages surrounding public offices (eup-myeon office) which have a high density of population, indicate a high traffic accessibility.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1177-1182
• /
• 2007

Recently, IEC61850 supports the standardized communication technique in both station bus and process bus, and presents the substation automation model. In this paper, we propose the required techniques to develop the Merging Unit (MU), which is one of the important data acquisition equipment in substation automation, under IEC61850 communication protocol. Especially, we also propose the precision time synchronization technique using GPS(Global Positioning System) for the MU. IEC61850-9-2 SV (Sampled Value) service is applied to the MU which is designed using microprocessor. In order to evaluate the performance of the proposed MU, the playback program, which can reconstruct the transmitted sampled value data on the basis of time information, is developed and the performance of the IEC61850 SV service for MU is verified experimentally.