• 펄프종이기술
• /
• 제38권5호
• /
• pp.60-65
• /
• 2006

The physical and mechanical properties of linerboard were shown to be affected by changing atmospheric conditions. Two atmospheric conditions were measured in order to investigate how they were affected by different atmospheric conditions on the physical and mechanical properties of domestic linerboard. The basis data set for the standardization research was provided in this study. It is confirmed that the relative humidity seemed to be a major factor on the quality deterioration of a linerboard. Experimental results have shown that the short span compression test (SCT) could be used to evaluate the quality characteristics of linerboardat different moisture content and relative humidity.

• Composites Research
• /
• 제20권4호
• /
• pp.31-41
• /
• 2007

시스템 요구 조건에 따른 다양한 돔 형상 설계를 위하여 외부 하중이 고려된 돔 형상 설계 식이 제시되었고, 동일 원통부와 보스 오프닝을 가지면서 다른 돔 형상을 갖는 압력 용기의 성능(파열압력*내부용적/복합재무게) 변화를 유한요소해석을 통하여 평가하였다. 해석 결과는 돔 형상이 낮아질수록 파열 압력이 저하되어 압력 용기 성능이 저하됨을 나타내었다. 특히 원통부 반경과 보스 오프닝간의 비를 나타내는 보스 오프닝 크기 비율(${\rho}\;o$)이 큰 경우는 돔 형상이 낮아짐에 따라 복합재 무게 증가율이 크게 나타남으로서 압력 용기 성능 저하의 원인이 되었고, 파열 압력 상승을 위하여 돔 부위에 추가적인 보강설계가 요구되었다. 예를 들어 ${\rho}\;o=0.35$ 이하의 돔인 경우, 돔 형상 변화가 크지 않음으로서 돔 형상 변화에 따른 압력 용기 성능 변화도 크지 않은 것으로 나타난 반면, ${\rho}\;o=0.54$ 이상의 압력 용기인 경우 낮은 돔으로 변화됨에 따라 파열 압력 감소와 복합재 무게 증가로 압력 용기 성능 저하가 비교적 크게 나타나서 압력 용기 내부 용적 증가나 스커트와 돔간의 공간 확보가 우선인 설계 조건을 제외하고는 낮은 돔 형상 설계가 바람직하지 않은 것으로 나타났다.

• 천문학회지
• /
• 제56권2호
• /
• pp.213-224
• /
• 2023

Type II solar radio bursts show frequency drifts from high to low over time. They have been known as a signature of coronal shock associated with Coronal Mass Ejections (CMEs) and/or flares, which cause an abrupt change in the space environment near the Earth (space weather). Therefore, early detection of type II bursts is important for forecasting of space weather. In this study, we develop a deep-learning (DL) model for the automatic detection of type II bursts. For this purpose, we adopted a 1-D Convolution Neutral Network (CNN) as it is well-suited for processing spatiotemporal information within the applied data set. We utilized a total of 286 radio burst spectrum images obtained by Hiraiso Radio Spectrograph (HiRAS) from 1991 and 2012, along with 231 spectrum images without the bursts from 2009 to 2015, to recognizes type II bursts. The burst types were labeled manually according to their spectra features in an answer table. Subsequently, we applied the 1-D CNN technique to the spectrum images using two filter windows with different size along time axis. To develop the DL model, we randomly selected 412 spectrum images (80%) for training and validation. The train history shows that both train and validation losses drop rapidly, while train and validation accuracies increased within approximately 100 epoches. For evaluation of the model's performance, we used 105 test images (20%) and employed a contingence table. It is found that false alarm ratio (FAR) and critical success index (CSI) were 0.14 and 0.83, respectively. Furthermore, we confirmed above result by adopting five-fold cross-validation method, in which we re-sampled five groups randomly. The estimated mean FAR and CSI of the five groups were 0.05 and 0.87, respectively. For experimental purposes, we applied our proposed model to 85 HiRAS type II radio bursts listed in the NGDC catalogue from 2009 to 2016 and 184 quiet (no bursts) spectrum images before and after the type II bursts. As a result, our model successfully detected 79 events (93%) of type II events. This results demonstrates, for the first time, that the 1-D CNN algorithm is useful for detecting type II bursts.

• 공업화학
• /
• 제10권2호
• /
• pp.299-303
• /
• 1999

경제적, 환경적인 이유로 신문용지를 생산하는데 신문고지가 상당량 재이용되고 있다. 본 연구에서는 국내 외 신문고지의 열화기간에 따른 제반 성질의 변화를 조사하기 위하여 시도하였다. 시료의 백색도, 수율 및 펄프 강도를 고려하면 열화기간이 증가할수록 탈묵성이 호주산 신문고지에서 가장 우수하고, 국내 신문원지를 사용한 신문고지와 일본 신문고지는 비슷하며, 카나다산 신문원지를 사용한 신문고지에서 가장 낮았다. 국내 신문원지를 사용한 신문고지의 경우, 열화기간 90일까지는 약 83%의 수율과 백색도 50% 이상을 나타내지만 그 이후에는 급격히 감소하였다. 또한 국내 신문용지의 경우 수입된 신문용지보다 섬유의 길이는 짧지만 제반 강도적성질은 높았다. 국내 신문용지와 수입 신문용지는 전반적으로 열화기간에 따라 인장강도와 파열강도는 증가하다가 감소하였으며, 인열강도는 점차 증가하였다.

• 펄프종이기술
• /
• 제46권1호
• /
• pp.39-45
• /
• 2014

Various approaches have been tried to reduce the emission of carbon dioxide in paper industry. One of important approaches is to use PCC manufactured from emission gas as a filler. However, it was recognized that PCC is inferior to other fillers in the paper strength properties of view. Therefore, pretreatment of PCC with pulp powder was tried to mitigate the strength reduction of paper. Pretreatment of PCC with pulp powder improved the bulk(7.4~12.9%) and air permeability(24.8~42.98%), but there is no significant change in opacity. Tensile index, burst index and stiffness were decreased by the use of pretreated PCC with pulp powder. Anionic and cationic PAM were used as a additive for PCC pretreatment in order to improve strength properties. There was no significant change in bulk in all kinds of PAM used in this study. Most strength properties were improved by the pretreatment of PCC with the anionic and cationic PAM and pulp powder, although the opacity and stiffness were more or less decreased.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.386-389
• /
• 1999

Amphoteric polymers have brought to papermakers' attention gradually. In this paper, a series of amphoteric starches with different cationic and anionic degree of substitution (DS) are prepared. Better product has been selected and used under different condition. As retention and drainage aids, amphoteric starches were used in shorter fiber length, weak strength and poor drainage bleached AQ-Soda wheat straw pulp. In neutral and alkaline papermaking system, when amphoteric starches contain 0.024-0.026 anionic degree of substitution (DS), it is shown that the higher the cationic degree of substitution (DS) in amphoteric starches, the better the filler retention. The filler retention is improved 12.5%, 30.3%, and 35.1% and 32.5% respectively by adding 1% amphoteric starch LS-L2 -1 (0.034), LS-L2-2 (0.040), LS-L2-3 (0.047) and LS-L2-4 (0.052). But the strength of handsheets if affected a little. By adding 2% Al2 (SO4)3 and 1.5% LS-L2-3 at pH 7.5, filler retention can be improved from 38% to 80%, and breaking length of sheet only decreases 3.2%. As dry strengthening aids, amphoteric starches were used in eucalyptus APMP. Amphoteric starches are used in eucalyptus APMP. The amphoteric starch LS-L2-2 is better dry strength aid. Adding 1% LS-L2-2 can improve breaking length 24.5%, burst index 42.9%, tear index 38.8%, folding endurance and density of the handsheets.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.30-35
• /
• 2013

To conserve wood resources for papermaking, chemical compositions of the hemp (Cannabis sativa L.) bast fiber cultivated in Korea such as holocellulose, ${\alpha}$-cellulose, lignin, alcohol-benzene extractives, hot and cold water extractives, and ash contents were investigated to manufacture the specialty packaging paper effectively. Significantly very low klason lignin content of 3.3% was accomplished by removing of the outer shell of bark. Laboratory soda pulping method which is very useful for the nonwood fiber was adapted, and it was found that there was no significant difference in both kappa number and H-factor between 25% and 30% NaOH charge. Hemp pulp cooked with the laboratory digester in 25% NaOH at $170^{\circ}C$ were mixed together with the wood pulp(NBKP:LBKP=1:1) in order to find the optimum mixture ratio which exhibited acceptable paper strength properties such as tensile index, burst index, and tear strength. When 10% of hemp soda pulps was mixed with 90% of wood pulps comprised of SwBKP and HwBKP (1:1), all physical strength increased significantly. The physical strength decreased as the amount of hemp pulp increased because the cell wall of bast fiber is very thick which causes low conformability and low fiber-fiber bonding. These results showed that paper made of hemp-wood pulp can be used for the specialty packaging paper which requires both the characteristic surface properties and the high physical strength of hemp fiber.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.65-72
• /
• 2009

We investigated the effect of polyelectrolyte types in Layer-by-Layer multilayering and furnish combination on physical properties of paper. Handsheets were made from pulp fibers with different polyelectrolytes composition, and their density, formation, tensile strength, strain, tear strength and burst strength were evaluated. The density of handsheet was slightly decreased by polyelectrolyte multilayering. Formation did not show a significant change, but all mechanical properties were increased by polyelectrolyte multilayering. Remarkable improvement in tensile and tear strengths was obtained when pulp fibers were treated with cationic starch and poly styrene 4-sulfonate. Irrespectively of final ionicity of pulp fiber, tensile index, strain and tear strength of paper could be improved simultaneously by polyelectrolyte multilayering.

• 펄프종이기술
• /
• 제37권1호
• /
• pp.47-52
• /
• 2005

Enzymatic pulping properties of mixed office waste paper in standard disintegrator were investigated for successful enzymatic deinking of mixed office waste paper. Enzymatic pulping need more revolution in standard disintegrator than alkaline pulping and Cellusoft need more revolution than Denimax. The freeness of disintegrated pulp with enzyme was higher than those of disintegrated pulps with alkaline and heat killed enzyme. The freeness of disintegrated pulp with Denimax was higher than that of disintegrated pulp with Cellusoft. The freeness of disintegrated pulps were increased with a dosage of enzymes. The mechanical properties of disintegrated pulp were improved with enzyme addition comparing with heat killed enzyme. The tensile and burst index of hand sheet of disintegrated pulps with acidic Cellusoft were higher than that of others.

• 한국가구학회지
• /
• 제17권1호
• /
• pp.23-32
• /
• 2006

This study was carried out to explore a new application of traditional Hanji and obtain fundamental properties for producing Hanji wallpaper by incorporating ceramics from wood and rice-husk as an interior building material. The results of properties determined were summarized as follows: The addition of ceramics in Hanji paper reduced its apparent density, but increased bulk density due to the ceramic particles distributed on the surface and inside the fiber of Hanji wallpapers. In particular, woodceramic particles were specifically distributed on the fiber surface, while particles of rice-husk ceramics were permeated into the inside surface of fibers. The density of rice-husk ceramics were greater than that of woodceramics. The physical properties of Hanji wallpapers, such as breaking strength, wet breaking strength, burst strength, tear index and folding endurance were deteriorated with the addition of ceramics. However, the addition of woodceramics in the Hanji wallpaper resulted in better strength in most cases than that of rice-husk ceramics, except tear strength. Therefore, an optimum addition level of woodceramics into the wallpaper was found to be 5% on the basis of intensity. The addition of ceramics also prolonged the combustion time because it lowered air permeability and brightness of the wallpaper.