• Journal of The Korean Astronomical Society
• /
• v.38 no.4
• /
• pp.437-443
• /
• 2005

The Solar Radio Burst Locator (SRBL) is a spectrometer that can observe solar microwave bursts over a wide band (0.1-18 GHz) as well as detect the burst locations without interferometry or mechanical scanning. Its prototype has been operated at Owens Valley Radio Observatory (OVRO) since 1998. In this study, we have evaluated the capability of the SRBL system in flux and radio burst location measurements. For this, we consider 130 microwave bursts from 2000 to 2002. The SRBL radio fluxes of 53 events were compared with the fluxes from USAF/RSTN and the burst locations of 25 events were compared with the optical flare locations. From this study, we found: (1) there is a relatively good correlation (r = 0.9) between SRBL flux and RSTN flux; (2) the mean location error is about 8.4 arcmin and the location error (4.7 arcmin) of single source events is much smaller than that (14.9 arcmin) of multiple source events; (3) the minimum location error usually occurred just after the starting time of burst, mostly within 10 seconds; (4) there is a possible anti-correlation (r = -0.4) between the pointing error of SRBL antenna and the location error. The anti-correlation becomes more evident (r=-0.9) for 6 strong single source events associated with X-class flares. Our results show that the flux measurement of SRBL is consistent with that of RSTN, and the mean location error of SRBL is estimated to be about 5 arcmin for single source events.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2496-2498
• /
• 2001

광 디스크 channel상에서 RSPC의 error correction capability를 확률적인 계산 방법으로 계산하는 데는 많은 어려움이 있다. 그 이유는 바로 광 디스크 channel이 burst error channel이기 때문인데, 이 burst error를 어떻게 다루는 가에 따라 그 error correction capability는 사뭇 달라진다. 이 논문에서는 Sony의 dust error distribution[1] 아래에서 4-state Morkov Chain[2]로 modeling하고 그 결과를 가지고 burst error를 channel의 특성과 ECC format의 특성에 맞게 제어할 수 있는 확률적인 계산방법을 소개하고 그것을 simulation하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1088-1097
• /
• 1999

In this paper we describe our investigation en ATM CLR(Cell Loss Rate) in the wireless ATM Networks, which consist of wireless access nodes and wireless links. A wireless access node is modelled as the ND/D/1queue. A wireless channel is modelled as channel with single and burst error characteristics, and it can be seen that the CLR degrades on a link with burst errors than on a link with single error. Because wireless channel can be approximated as the Rayleigh or Rician fading channel and wireless communication systems are power limited, it is customary that the CLR degrades on a link with burst errors than on a link with single error. So error control method should be used to improve performance degradation caused by burst errors. We consider the forward error correction(FEC) as error control scheme for CBR traffics to improve performance degradation caused by burst errors, and analyze performance of concatenated FEC scheme through the use of CLR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2013-2022
• /
• 1996

Cyclic Codes can be used for burs(or time slot) synchronization as well as error detection as that the overhead bits of the burst, which would be nessary to seperate burst synchronization and error detection systems, may be eliminated. In this paper a new method for combined burst synchronization and error detection is proposed which requires CRC decoding once only, while the previous method which inspects channel error after searching for burst synchronization requeires CRC decoding twice. The proposed method has the advantage of simple implementation and reducing processing time over the previous one, still showing the same detection perfdormance. It may occur that a burst different from the actually transmitted one is falsely accepted in the presence of channel errors. The exact expression for the false acceptance probability is newly presented through a simple derivation basied on the fact that it is determined by channel errors but not by detection methods.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.4
• /
• pp.24-31
• /
• 1995

In this paper, the dual-mode burst-error-correcting decoding algorithm is adapted to the multiple trellis-coded .pi./4 shift QPSK in order to achieve the improvement of bit error rate (BER) performance over fading channels. The dual-mode adaptive decoder which combines maximum likelihood decoding with a burst detection scheme usually operates as a Viterbi decoder and switches to time diversity error recovery whenever an uncorrectable error pattern is identified. Rayleigh fading channels and Rician fading channels having the Rician parameter K=5dB are used in computer simulation, and the simulation results are compared with those of interleaving techniques. It is shown that under the constraint of the fixed overall memory quantity, the dual-mode adaptive decoding scheme gains an advantage in the BER performance with respect to interleaving strategies.

• Honam Mathematical Journal
• /
• v.30 no.1
• /
• pp.33-45
• /
• 2008

Lee weight is more appropriate for some practical situations than Hamming weight as it takes into account magnitude of each digit of the word. In this paper, we obtain a sufficient condition over the number of parity check digits for codes correcting random errors and simultaneously detecting burst errors with Lee weight consideration.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.271-274
• /
• 2003

This paper presents a robust error concealment method for burst-packet-loss networks. The proposed error concealment algorithm can reduce the computational complexities of the existing error concealment methods. Moreover, experimental results show that the proposed method produces the better video quality than the conventional boundary matching algorithm.

• Journal of Communications and Networks
• /
• v.8 no.2
• /
• pp.234-240
• /
• 2006

We study the dynamic burst assembly based on traffic prediction and offset and delay differentiation in optical burst switching network. To improve existing burst assembly mechanism and build an adaptive flexible optical burst switching network, an approach called quality of service (QoS) based adaptive dynamic assembly (QADA) is proposed in this paper. QADA method takes into account current arrival traffic in prediction time adequately and performs adaptive dynamic assembly in limited burst assembly time (BAT) range. By the simulation of burst length error, the QADA method is proved better than the existing method and can achieve the small enough predictive error for real scenarios. Then the different dynamic ranges of BAT for four traffic classes are introduced to make delay differentiation. According to the limitation of BAT range, the burst assembly is classified into one-dimension limit and two-dimension limit. We draw a comparison between one-dimension and two-dimension limit with different prediction time under QoS based offset time and find that the one-dimensional approach offers better network performance, while the two-dimensional approach provides strict inter-class differentiation. Furthermore, the final simulation results in our network condition show that QADA can execute adaptive flexible burst assembly with dynamic BAT and achieve a latency reduction, delay fairness, and offset time QoS guarantee for different traffic classes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1477-1486
• /
• 1997

Conventioally the decoding methods and the design of coset codes for burst synchronization and error detection have been based on the concept that slips occuring to the right or to the left with respect to a reference timing are corrected. In this paper we newly approach to the design of coset codes relying on the condition that only a single code word can exists in an observation interval, which provides an extentended view on the conventional approach. A theorem concerning the condition is presented. A combined burst synchronization and error detection system with maximum slip correction capability have been devised based on the theorem and a detection method is falsely accepted in the presented of channel errors. The false acceptance probabilities of the system are derived and its performance is analyzed through computer computation using the derived results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.3-8
• /
• 2012

Two-dimensional product code has been studied for correcting burst errors on the storage systems. An RS-LDPC product code consists of an RS code in horizontal direction and an LDPC code in vertical direction. First, we detect the position of burst errors by using RS code, then LDPC code corrects the errors by using the burst error positions. In storage system, long burst errors are occurred by various reason. So, we need a strong code for correcting the long burst errors. RS-LDPC product code is good for long burst errors. However, as the storage density grows the length of the burst errors will be longer. Thus, we propose an LDPC-LDPC product code, it is strong for correcting the very long burst errors. Also, the proposed LDPC-LDPC product code performs better than RS-LDPC product code when the random errors are occurred, because a row direction LDPC code performs better than row direction RS code.