• Carbon letters
• /
• v.9 no.3
• /
• pp.200-202
• /
• 2008

In order to improve the thermal stability of PAN-based electrospun fibers, AP-PER-MEL and $TiO_2$ were added in to the fibers as additives. The polymer composite with uniformly mixed additional agents was obtained. In case of non-treated sample, the fibers were burn off completely with high rate within $620^{\circ}C$. But in case of treated samples (EF-M and EF-MT), it is sure that the thermal stability was improved by studying TGA data and ISO flammability test about 20 and 30%, respectively. A synergy effect of adding two kinds of agents (AP-PER-MEL and $TiO_2$) into PAN-based electrospun fibers was confirmed. Through SEM images, it is confirmed that the fiber shape can be kept even after addition of agents (AP-PER-MEL and $TiO_2$). Finally the thermal stability of fibers was largely developed with keeping the nature of PAN-based fibers effectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.58-58
• /
• 2010

Carbon nanotubes (CNTs) have been extensively studied owing to its superior electrical properties, especially high electron mobility, which can be applied to various nano-electronic devices. However, synthesized CNTs have a mixture of metallic and semiconducting tubes so that their separation has been a tremendous obstacle to the practical application in electronic device structures. Among the different separation methods, electrical breakdown process to selectively burn out the metallic tubes has been quite successful though it needs additional process in the fabrication of device structures. Here, we report on the selective but not perfect growth of semiconducting nanotubes via use of diluted ferritin catalyst. SWCNTs were grown on ferritin catalyst, where the concentration of the ferritin solution was changed. In this way, we could fabricate the electrical breakdown free SWCNT thin film transistors on the flexible polyimide (PI) substrate. When we used the ferritin diluted by 1/2000, ~ 60 % of the SWCNT thin film transistors showed a perfect p-type behavior with an on/off current ratio higher than $10^5$ and on-current greater than $10^{-7}$ A. We will also discuss the photo-response of such formed thin film transistors over both visible and UV light.

• Transactions of Materials Processing
• /
• v.33 no.3
• /
• pp.193-199
• /
• 2024

The friction welding characteristics of stainless steels, mainly used in energy and chemical plant industries due to its excellent corrosion resistance and high strength, was evaluated in this study. Friction welding was introduced and conducted at a rotation speed of 2,000 RPM, friction pressure of 30 MPa, burn-off length of 5 mm and upset pressure of 110 ~ 200 MPa on rod typed specimens. The grain boundary characteristics distributions such a grain size, shape, misorientation angle and kernel average misorientation of the welds were clarified by electron backscattering diffraction method. The application of friction welding on SUS304 alloy resulted in a significant refinement of the grain size in the weld zone (5.11 mm) compared to that of the base material (48.09 mm). The mechanical properties of the welds, on the other hand, appeared to be relatively low or similar to those of the base material, which were mainly caused by dislocation density in the initial material and grain refinement in the welds.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.587-592
• /
• 2007

Purpose: In case of postburn flexion contracture of the fingers, skin graft, geometrical relaxation techniques, local flap, and free flap have been used. Among these procedures, full-thickness skin grafts from the inguinal area are widely used to reconstruct a postburn flexion contracture in the fingers. But there are many esthetic and functional problems in this procedure. Especially, hyperpigmentation of the skin-grafted fingers poses a troublesome problem, particularly in the patients who have dark colored skin. To solve the problem, we have used pulp graft which was harvested from the lateral aspect of great toe. In the present study, we report pulp graft, with which we have obtained a good result in the treatment of postburn flexion contracture of the fingers. Methods: Between September of 2004 and August of 2006, great toe pulp graft was performed to 20 sites of 15 patients. After release of the postburn flexion contracture using Z-plasty, the composite tissue (pulp) harvested from the lateral aspect of great toe was grafted on the raw surface. Moisture dressing with ointment and foam dressing material was performed. Stratum corneum of the graft got stripped off in two to four weeks after pulp graft. The color of the pulp graft was slightly reddish, then it became similar to the adjacent tissue. Results: There was complete take in all the patients who were treated with pulp graft. Great toe pulp graft provided similar color and texture to the adjacent skin, high rate of graft take, and left only a minimal scar at donor site. Conclusion: Thick keratin layer and inelastic nature of the pulp make this type of the graft much easier and simpler, and ensure a better take. Pulp graft is useful method for the reconstruction of the postburn flexion contracture in fingers.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.2
• /
• pp.79-85
• /
• 2007

An internal ballistic model to predict the performance of a Polyethylene-GOX (PE-GOX) hybrid motor was proposed and evaluated. A theoretical treatment of the model was followed by detail discussion of each of the factors affecting the overall performance. The present model consists of the governing equations by considering the unsteady burn-back rate of the fuel grain and on-off response characteristics of a oxygen-supply valve. The numerical results using the 4th order Runge-Kutta scheme with temporal physicochemical properties showed good agreements with test results and the global effects of the performance parameters, such as the burning area of the fuel grain, O/F ratio, and etc., on the performance of the motor were analyzed.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.105-113
• /
• 2017

Recently the direct injection diesel engine is the most efficient one available for road vehicles, so this fundamental advantage suggests the compression injection diesel engine are a wise choice for future development efforts. The compression ignition diesel engine, with its bigger compression ratios if compared to the SI engine, offers a higher thermodynamic efficiency, also additionally the diesel engine with its less pumping losses due to the throttled intake charge as in a SI engine has higher fuel economy. But the largest obstacle to the success of this engine is meeting emission standards for Nitric oxides and particulate matter while maintain fuel consumption advantage over currently available engines. Thus its use should be largely promoted, however, diesel engine emits more Nitric oxides and particulate matter than other competing one. There has been a trade-off between PM and NOx, so efforts to reduce NOx have increased PM and vice versa, but trap change this situation and better possibility emerge for treating NOx emission with engine related means, such as injection timing, equivalence ratio, charge composition, and engine speed. The common rail direct injection system is able to adjust the fuel injection timing in a compression ignition engine, so this electronically controlled injection system can reduce the formation of NOx gas without increase in soot. In this study it is designed and used the engine test bed which is installed with turbocharge and intercooler. In addition to equipped using CRDI by controlling injection timing with mapping modulator, it has been tested and analyzed the engine performance, combustion characteristics, and exhaust emission as operating parameters.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.7
• /
• pp.749-755
• /
• 2011

The performance and emission characteristics of a CNG (compressed natural gas) engine were experimentally investigated under different natural gas compositions. The engine specifications were as follows: 6606 cc, turbo, lean-burn-type; its ignition timing was fixed for the fuel gas with a HHV (higher heating value) of 10454 kcal/$Nm^3$. The experimental results showed that when the HHV of the fuel gas was changed from 10454 kcal/$Nm^3$ to 9811 kcal/$Nm^3$ and 9523 kcal/$Nm^3$, the average power reductions were 3.2 % and 3.4 % (1.5 % and 2.1 %, respectively, with A/F control switched off), respectively, and the average thermal-efficiency reductions were 1.1 % and 1.5 % (1.5 % and 2.1%, respectively, with A/F control switched off), respectively. The emissions of $CO_2$, CO, and $NO_x$ decreased as the HHV of the fuel gas was lowered. On the other hand, the emissions of THC (total hydrocarbon) were not consistent, and the extent of change in their emissions was small.

• Journal of Radiation Protection and Research
• /
• v.23 no.2
• /
• pp.109-114
• /
• 1998

Radiological safety for the conventional operation of Demonstration-Scale Incineration Plant (DSIP) was assessed on the basis of the results of trial burns using the simulated and real radioactive wastes. Radiation dose assessments for routine releases on an annual basis as well a several severe accidental releases on a short-term basis (2h) revealed that there would be no significant environmental impact when low-level waste Is incinerated in DSIP. For semivolatile radioactive cesium species, expected emission concentrations slightly exceeded 10% of maximum permissible concentration. Removal characteristics of the bag filter for condensed-phase cesium species was investigated by the trial burns of simulated waste with inactive cesium tracer. In the off-gas before passing through bag filter, distributions of condensed cesium species in the transition size ranging between the diffusional and inertial region are less than 5%. The overall collection efficiency of the bag filter for cesium species was higher than 99.9%, showing enough decontamination capability as a primary filter for the low-temperature dry off-gas system in radwaste incineration plant.

• Journal of Nutrition and Health
• /
• v.2 no.1
• /
• pp.47-50
• /
• 1969

Sea-divers(woman) are living in coastal villages and their principal daily work is to dive into sea water in order to get sea-weeds, pearls etc. They are able to be stayed inside the water for a relatively long period and at the same time have a hard physical work during the period. Besides these works, they work also on farms and in homes in their rest time. Hwa-Jeon-Min('fire-field' farmers) are living in higher mountainous areas (plateau areas) and they burn off the ground for cultivation and obtain the crops on which they are living. Usually, they are far apart from cities and markets. The above mentioned two groups are special social groups in this country, consequently are interested in their food and nutritional habbits. The summarized surveyed results are as follows (See the Tables 1, 2, and 3). 1. In case of Sea-divers(woman): a. Staple foods are cereals, vegetables, and fishes and shell-fishes. These foods occupy 40%, 15%, and 24% respectively of all the foods intaken. b. Relatively large amount of protein and fat are intaken. Especially animal protein shows 64% of total protein intaken. c. Intake of vitamin $B_2$ is low but all other nutrients are intaken in relatively good amount. 2. In case of Hwa-Jeon-Min ('fire-field' farmers): a. Staple foods are cereals, potatoes, and vegetables. These foods occupy 61%, 19%, and 14% respectively of all the foods intaken. b. Intaken amount of animal foods is only 7 grams and this figure is only 0.1% of total foods intaken. c. Intake of animal protein is 0.4 to 0.6 grams per day and that of fats is 8 to 10 grams only. d. Intake of carbohydrate is very high. The calorie derived from the carbohydrate is 86% of total calorie intaken. e. Intakes of calcium, vitamin A, Vitamin $B_1$, Vitamin $B_2$, and niacin are low. Especially, calcium, vitamin A, and vitamin $B_2$ are deficient from their food habbits.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.97-104
• /
• 2000

PAN-based activated carbon fibers/phenolic resin matrix composites (ACFCs) were manufactured via molding process with oxidized carbon fabrics (plain-type) and phenolic resin (resole-type) compounded by 70 : 30 wt%. The green body (as molded) was submitted to carbonization (at 100$0^{\circ}C$) in an inert environment and activation (at 700, 800, 900 and 100$0^{\circ}C$) in a $CO_2$ environment. In this work, the influence of activation temperatures was investigated in surface properties, such as pH, acid- and base-values by titration method, and in adsorption properties, i.e., specific surface area and pore structures by BET-method of the composites. Also, the pressure drops of the specimens were calibrated by ASTM. As a result, the activation temperature influenced the surface property of ACFCs. When the activation temperature was higher than 90$0^{\circ}C$, the surface was gradually developed in basic nature. And, the evolutions of specific surface area, total pore volume and pore size distribution of ACFCs could be easily confirmed the dependence on the activation temperature. Among them, well-developed pore structure from adsorption characteristics was changed of the ACFCs activated at 90$0^{\circ}C$. Also, the pressure drop was slightly decreased with increasing the temperature due to increasing the burn-off with heat treatment temperature of ACFCs.