• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.4 s.152
• /
• pp.607-614
• /
• 2006

This study was carried out to suggest the optimal spinning process condition which provides a proper range of tenacity and biodegradability as textile fibers. The effects of the melt spinning speed and heat treatment on the mechanical property and biodegradability of polylactic acid fiber were investigated. Polylactic acid(PLA) was spun in a high spinning speed of $2000{\sim}4000m/min$. Each specimen was heat-treated at $100^{\circ}C$ during 30min. Mechanical properties such as breaking stress and the degree of crystallinity were evaluated using WAXS. Biodegradability was estimated from the decrease of breaking stress, weight loss, and the degree of crystallinity after soil burial. Experimental results revealed that heat treated specimens showed higher breaking stress than untreated specimens, but the increase was not so high as was expected from the remarkable change of crystallinity by heat treatment. It was concluded that breaking stress was more influenced by spinning speed than heat treatment. In the soil burial test, however biodegradability calculated from weight loss was more influenced by heat treatment than spinning speed.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.4
• /
• pp.63-75
• /
• 2018

The lower marine terrace 1 and 2 surfaces distributed between Ulsan and Pohang coast in the southeastern coast of the Korean penninsula have been correlated with MIS 5e and 5a (or 5c) by amino acid dates, 14C dates, wide-spread tephra correlation and pollen analysis respectively. In this study, to test the reliability of the OSL method for the estimation of the numerical burial age of marine sediment deposits, we analyzed the samples from the marine terraces which have been known as typical marine terraces formed during MIS 5e and MIS 5a in the above-mentioned coast. The burial ages of the marine deposit of the lower marine terrace 1 and 2, with paleoshoreline altitudes of 18m to 19m and 10m to 11m respectively, both showed about the same age of 60 ka BP. The lower marine terraces 1 and 2, however, were divided into two terrace surfaces by a clear terrace cliff. Besides, the OSL dates of the lower and upper parts of the lower marine terrace 2 of the Bonggil coast showed the reversed burial ages. In the lower marine terrace 1 of the Sanhari coast, almost the same burial ages were derived from both the lower part (marine rounded gravel layer) and the upper part (terrestrial angular gravel layer) of the terrace deposit. Therefore, at the present time, judging from only the OSL dates measured in this study, it could be argued that the OSL method is not the best for the estimation of forming periods of the lower marine terraces 1 and 2 and their classification.

• Economic and Environmental Geology
• /
• v.20 no.3
• /
• pp.159-168
• /
• 1987

Some physico-chemical properties such as surface area, moisture content, cation exchange capacity, swelling rate, pH, viscosity and liquid limit have been determined for evaluation of Cabentonite deposit occurring in four localities; Yonil, Gampo, Haseo and Pohang, in Gyeongsang-do. Montmorillonite contents can be derived from surface area measurement. Enhancement of liquid limit values and swelling volume were observed in the samples which had higher exchangeable Na ion and finer particle-size distribution. Identical results were observed even in the Na-exchanged samples. This suggests that aggregation effects have a great influence on physico-chemical properties. Aggregation of montmorillonite were controlled not only burial depth but also composition of exchangeable cation. Consequently, sample occurred in Yonil area where has the greatest burial depth in the area show somewhat lower physico-chemical properties than those of samples occurred in the other localities. However, the basic test applied in this study provides very useful preliminary information relating to its commercial potential.

• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.902-912
• /
• 2003

The purpose of this research was two-folds; first, to investigate the type of soil contaminated in the Hunsang excavated from the Milchang-gun burial of Mapo for the purpose of proposing the adequate washing method, second, to utilize the chemical degradation result obtained from the previous research to identify the natural dye source used in the Hunsang textile. The application of KS K0251 test showed that the soil was more oleophilic than hydrophilic thus indicating that wet cleaning was more adequate that dry cleaning for the removal of Hunsang soil. The GC-MS result of the Hunsang extraction showed dimethyl phthalate and 2,4-di-tert-butylphenol as its degradation product and these coincided with the degradation products from the alizarin standard data of previous research. The comparison of the two suggested that it is likely that Hunsang was dyed with madder which has alizarin as its major chromophore.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.178-187
• /
• 1993

Degradation of the starch-polyethylene composite film by an activated sludge treatment and a soil burial test was examined. The treated films had deformed structures which were resulted from the removal of starch during the treatments. The added auto-oxidant caused the degradation of the polyethylene matrices and the crosslinking reactions after the oxidation of polyethylene chains as well. As a result of soil burial test, the degradation reaction of the composite film containing corn oil as an auto-oxidant was, however, prevalent : number- and weight-average molecular weight of polyethylene decreased, while the molecular weight distribution increased.

• Journal of the Korean Professional Engineers Association
• /
• v.44 no.1
• /
• pp.44-47
• /
• 2011

Huge amount of energy produced by an underground nuclear test is released into the surrounding rock. Depending on the properties of the bed rock surrounding the detonation and overlaying it a variety of effects can occur. At some particular depth the increasing amount of material thrown upward is exactly balanced by the decreasing fraction escaping the crater, the crater volume reaches to a maximum. This depth is called the optimum depth of burial and varies somewhat with the geology of the site, being greater for less dense and structurally weaker material.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.12
• /
• pp.61-67
• /
• 2023

Heat pipes located underground in urban areas and operated under high temperature and pressure conditions can cause large-scale human and economic damage if damaged. In order to predict damage in advance, damage and construction information of heat pipe are analyzed to derive independent variables that have a correlation with frequency of damage, and a simple regression analysis modified model using each variable is applied to the field. However, as the correlation between independent variables applied to the model increases, the independence between variables is harmed and the reliability of the model decreases. In this study, the independence of the pipe diameter, burial depth, insulation level of monitoring system, and disconnection or short circuit of the detection line, which are judged to be interrelated, was tested to derive a method for combining variables and setting categories necessary to apply to the frequency of damage estimation model. For the test of independence, the continuous variables pipe diameter and burial depth were each converted into three categories, insulation level of monitoring system was converted into two categories, and the categorical variable disconnection or short circuit of the detection line status was kept as two categories. As a result of the test of independence, p-value between pipe diameter and burial depth, level of monitoring system and disconnection or short circuit of the detection line was lower than the significance level (α = 0.05), indicating a large correlation between them. Therefore, the pipe diameter and burial depth were combined into one variable, and the categories of the combined variable were set to 9 considering the previously set categories. The insulation level of monitoring system and the disconnection or short circuit of the detection line were also combined into one variable. Since the insulation level is unreliable when the detection line status is disconnection or short circuit, the categories of the combined variable were set to 3.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.454-466
• /
• 2017

North Korea intended to increase the power of its nuclear weapons and standardize warhead to be loaded in ballistic missiles through the $4^{th}$ and $5^{th}$ nuclear tests. In this study, three kinds of nuclear weapons that North Korea might have used in the $4^{th}$ and $5^{th}$ nuclear tests to achieve their technical goals were suggested. Monte Carlo modeling and various technical assessments have shown that boosted fission weapons are most likely to be used. Also, using the empirical formula considering the burial depth of explosion, we found that the yield of the $4^{th}$ and $5^{th}$ nuclear tests is at least twice as strong as that is expected it could be and the initial design power could reach 8kt before amplification. This means that North Korea has already achieved a substantial level of nuclear fusion technology through the $4^{th}$ test and has made a breakthrough in the miniaturization of nuclear weapons through the $5^{th}$ test. After two or three additional tests, North Korea is expected to have nuclear missiles equipped with nuclear warhead by 2020, which is expected to complete ballistic missile development.

• Journal of Environmental Science International
• /
• v.6 no.4
• /
• pp.379-384
• /
• 1997

The biodegradable characteristics of poly-$\beta$-hydroxybutyrate(PHB) film by fun맥 and soil burial are Investigated. As the results of the American Standards for Testing and Materials(ASTM) method, the you of Aspergillus niger was apparent on the PHB containing plate. This suggests that PHB was utilized as the sole carbon source by Aspergillus niger and ASTM method may have applications as measuring means of biome gradability of polyhydroxyalkanoic acid(PHA). PHB film was studied by monitoring the time-dependant changes in weight loss of PHB film under 30% and relative humidity 80 % during pot-test. As the results of pot-test, PHB film was decomposed about 87 % in 30 days by soul microorganisms. PHB film was more slowly degraded than PHB/HV film.

• Geomechanics and Engineering
• /
• v.8 no.2
• /
• pp.221-235
• /
• 2015

A series of laboratory model tests were conducted to investigate the effects of buried pipes location on the bearing capacity of strip footing in cohesionless soil. The variables examined in the testing program include relative density of the sand, loading rate of tests, burial depths of pipe and horizontal distance of pipe to footing. The test results showed a significant increase in bearing capacities when embedment ratio of pipe and horizontal distance of pipe to footing were increased. Based on the test results, it can be concluded that the location of pipes and relative density of sand are main parameters that affect the bearing capacity of strip footing. However, loading rate has not considerable effect on bearing capacity.