• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.285-293
• /
• 1997

Numerical calculations has been performed for the flow and heat transfer to a circular cylinder from a hot circular impinging air jet. The characteristics of the flow and heat transfer are investigated and compared with the two-dimensional flow. The present study lays emphasis on the investigation on the flow and heat transfer of the three-dimensionality. The effects of the buoyancy force and the size of jet are also studied. The noticeable difference between the three and the two-dimensional cases is that there is axial flow of low temperature into the center-plane of the cylinder from the outside in the recirculation region. Local Nusselt number over the cylinder surface has higher value for the large jet as compared with that of the small jet since the energy loss of hot jet to the ambient air decreases with increase of the jet size. As buoyancy force increases the flow accelerates so that the period of cooling by the ambient air is reduced, which results in higher local Nusselt number over the surface.

• 설비공학논문집
• /
• 제28권2호
• /
• pp.55-62
• /
• 2016

The air flows in building caused by thermal buoyancy, known as the stack effect, have a pronounced influence on both the indoor environment (thermal environment, noise, draught and contaminant diffusion) and energy needs in high-rise buildings. Prior studies for airflow in high-rise buildings were focused on the degree of stack effect and countermeasures. The wind pressure was neglected during the calculation of the indoor airflow in high-rise buildings to clarify the effect of thermal buoyancy in previous studies. However, wind is an important driving force of indoor airflows in buildings with the stack effect. In this study, the effect of wind pressure on indoor airflow in high-rise building when the stack effect is dominant in winter was analyzed. In this paper, methods that involved considering the wind pressure in airflow network simulation were analyzed.

• Ocean Systems Engineering
• /
• 제5권2호
• /
• pp.109-123
• /
• 2015

In the present study, the coupled dynamic response of a Submerged Floating Tunnel (SFT) and mooring lines under regular waves is solved by using two independent numerical simulation methods, OrcaFlex and CHARM3D, in time domain. Variations of Buoyancy to Weight Ratio (BWR), wave steepness/period, and water/submergence depth are considered as design and environmental parameters in the study. Two different mooring-line configurations, vertical and inclined, are studied to find an optimum design in terms of limiting tunnel motions and minimizing mooring-line tension. The numerical results are successfully validated by direct comparison against published experimental data. The results show that tunnel motions and tether tensions grow with wave height and period and decrease with submergence depth. The inclined mooring system is more effective in restricting tunnel motions compared to the vertical mooring system. Overall, the present study demonstrates the feasibility of this type of structure as an alternative to traditional bridges or under-seabed tunnels.

• Ocean Systems Engineering
• /
• 제7권4호
• /
• pp.413-433
• /
• 2017

The dynamic and structural responses of a 1000-m long circular submerged floating tunnel (SFT) with both ends fixed under survival irregular-wave excitations are investigated. The floater-mooring nonlinear and elastic coupled dynamics are modeled by a time-domain numerical simulation program, OrcaFlex. Two configurations of mooring lines i.e., vertical mooring (VM) and inclined mooring (IM), and four different buoyancy-weight ratios (BWRs) are selected to compare their global performances. The result of modal analysis is included to investigate the role of the respective natural frequencies and elastic modes. The effects of various submergence depths are also checked. The envelopes of the maximum/minimum horizontal and vertical responses, accelerations, mooring tensions, and shear forces/bending moments of the entire SFT along the longitudinal direction are obtained. In addition, at the mid-section, the time series and the corresponding spectra of those parameters are also presented and analyzed. The pros and cons of the two mooring shapes and high or low BWR values are systematically analyzed and discussed. It is demonstrated that the time-domain numerical simulation of the real system including nonlinear hydro-elastic dynamics coupled with nonlinear mooring dynamics is a good method to determine various design parameters.

• 한국안전학회지
• /
• 제10권3호
• /
• pp.68-80
• /
• 1995

A series of parametric calculations have been performed in order to investigate the short-term and short-range plume and puff behavior of toxic gaseous and solid pollutant dispersion in an open atmosphere. The simulation is made by the use of the computer program developed by this laboratory, in which a control-volume based finite-difference method is used together with the SIMPLEC algorithm for the resolution of the pressure-velocity coupling appeared In Wavier-Stokes equation. The Reynolds stresses are solved by the standard two-equation k-$\varepsilon$ model modified for buoyancy together with the RNG(Renormalization Group) k-$\varepsilon$ model. The major parameters considered in this calculation are pollutant gas density and temperature, the relative velocity of pollutants to that of the surrounding atmospheric air, and particulate size and density together with the height released. The flow field is typically characterized by the formation of a strong recirculation region for the case of the low density gases such as $CH_4$ and air due to the strong buoyancy, while the flow is simply declining pattern toward the downstream ground for the case of heavy molecule like the $CH_2C1_2$and $CCl_4$, even for the high temperature, $200^{\circ}C$. The effect of gas temperature and velocity on the flow field together with the particle trajectory are presented and discussed in detail. In general, the results are physically acceptable and consistent.

• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.138-151
• /
• 2021

The effect of a reactant ratio on the growth of a buoyancy-driven instability in an irreversible A+B→C reaction system is analyzed theoretically and numerically. Taking a non-stoichiometric reactant ratio into account, new linear stability equations are derived without the quasi-steady state assumption (QSSA) and solved analytically. It is found that the main parameters to explain the present system are the Damköhler number, the dimensionless density difference of chemical species and the ratio of reactants. The present initial grow rate analysis without QSSA shows that the system is initially unconditionally stable regardless of the parameter values; however, the previous initial growth rate analysis based on the QSSA predicted the system is unstable if the system is physically unstable. For time evolving cases, the present growth rates obtained from the spectral analysis and pseudo-spectral method support each other, but quite differently from that obtained under the conventional QSSA. Adopting the result of the linear stability analysis as an initial condition, fully nonlinear direct numerical simulations are conducted. Both the linear analysis and the nonlinear simulation show that the reactant ratio plays an important role in the onset and the growth of the instability motion.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.436-444
• /
• 2015

A submerged body is sensitive to changes in the roll moment because of the small restoring moment and moment of inertia. Thus, a method for predicting the roll-related hydrodynamic coefficients is important. This paper describes a deduction method for the hydrodynamic coefficients based on the results of a coning motion test. A resistance test, static drift test, and coning motion test were performed to obtain the coefficients in the towing tank of Seoul National University. The sum of the hydrodynamic force, inertial force, gravity, and buoyancy was measured in the coning motion test. The hydrodynamic force was deduced by subtracting the inertial force, gravity, and buoyancy from the measured force. The hydrodynamic coefficients were deduced using the regression method.

• 한국해양공학회지
• /
• 제29권3호
• /
• pp.217-223
• /
• 2015

In order to predict the motions of a planing hull in waves, it is necessary to accurately estimate the force components acting on the hull such as the hydrodynamic force, buoyancy, and friction, as well as the wave exciting force. In particular, based on strip theory, hydrodynamic forces can be estimated by the summation of the forces acting on each cross-section of the hull. A non-linear strip method for planing hulls was mathematically developed by Zarnick, and his formula has been used to predict the vertical motions of prismatic planing hulls in regular waves. In this study, several improvements were added to Zarnick's formula to predict the vertical motions of warped planing hulls. Based on calm water model test results, the buoyancy force and moment correction coefficients were modified. Further improvements were made in the pile-up correction. Pile-up correction factors were changed according to variations of the deadrise angles using the results found in previous research. Using the same hull form, captive model tests were carried out in other recent research, and the results were compared with the present calculation results. The comparison showed reasonably good agreements between the model tests and present calculations.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.262-270
• /
• 1987

본 논문에서는 Eulerian 좌표축에서 온도 경계층과 혼합된 비정상 경계층 유 동을 효과적으로 다룰 수 있는 좌표변환 방법과 수치해석 방법을 도입하였다. 이전 의 수치적 방법들은 축차적이며, 뒷정체점 부근의 경계층 두께가 시간과 더불어 지수 적으로 증가하므로, 격자점의 수를 경계층 두께의 증가에 따라 상당히 늘려 주어야 된 다. 그러나 여기에서는, 격자점의 수를 무리하게 늘릴 필요가 없으며 일반적인 비선 형 차분방정식을 정확도를 떨어뜨리지 않고 선형화시킴으로써 비축차적인 수치해들이 허용된다. 이런 선형화 방법은 Beam & Warming에 의해 최초로 압축성 Navier-Stokes 방정식에 사용되었고, Orlandi & Ferziger, Kim & Chang에 의해 경계층 유동에 확장되 었다.또한 뒷정체점 부근에서 경계층 두께의 증가로 인한, 격자점 증가의 필요를 피하기 위하여, 몇 가지 서로 다른 종류의 변환변수들을 시간과 공간에 따라 선별적으 로 사용하여 수치적인 경계층 두께가 거의 일정하도록 만들었다. 이와 같은 변환변 수들은 또한 쌍-포물선형인 현 지배방정식의 초기조건들을 쉽게 구할 수 있도록 허용 해 준다.

• 현장농수산연구지
• /
• 제12권1호
• /
• pp.29-38
• /
• 2010

본 연구는 기존의 무논점파기의 문제점(새 피해, 파종한 종자의 건조현상, 강우 또는 관개 시 가벼운 볍씨 또는 어린 유묘의 뜨는 문제 등)으로 초기 입묘가 불량한 요인을 개선하기 위하여 시험을 추진하였으며 얻어진 결과는 다음과 같다. 1. 롤러 간의 피복재 사상(모래형) 규산질비료의 피복량이 일정치 않았다. 2. 기존의 무논점파 파종장치의 정확한 점파작업이 요구되었으며 파종작업 시 볍씨가 롤러 홈 회전과정에서 발생되는 파손이 인정되었으며 이에 대한 개선이 요구되었다. 3. 사상 규산질비료의 정밀한 피복작업이 미진하였으며 이를 위한 복토재의 개선(2mm내외 사상)과 파종작업장치의 정확성이 요구되었다. 4. 파종작업 시 바람이 강하게 불 경우 사상규산질비료의 피복위치 불안정으로 이에 대한 보완대책이 요구되었다.