• Microbiology and Biotechnology Letters
• /
• v.16 no.4
• /
• pp.270-274
• /
• 1988

Samples used for the enrichment culture were collected from the sea water of suspected chronic petroleum contamination in the vicinity of Pusan, Chungmu and Ulsan ports, Korea. Alkaline Iysis and agarose gel electrophoresis techniques were employed to screen these isolates for the presence of plasmid DNA. There were n little differences in the percentage of isolates containing plasmids between sampling sites of unpolluted sen water (22％) and polluted son water (25％). Bacterial isolates taken from the Bunker-C oil enriched culture showed significantly more plasmid incidence (29％). About two thirds of strains grown on a variety of hydrocarbons were Gram negative strains of which 33％ contained one or more plasmids. Multiple plasmids were observed in 23％ of the plasmid-carrying strains. Forty one percent of the plasmids detected were estimated to have a mass of 20 kb or more.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.132-143
• /
• 1997

Removal of spilled oil over the sea and the river has become one of the urgent problem in these days. Removing oil using mechanical devices are recommended because chemical dispersion can cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of working conditions of a belt type skimmer on the rate of recovery for the spilled oil. The oil chosen for the present experiment was diesel oil. Three different situations, namely, upward, downward, up-and-downward pickup have been investigated for various contact angles, belt speeds and oil thicknesses. The results show that the rate of oil recovery for the case of downward pickup with a contact angle of 45.deg. shows the highest among all the conditions. For the removal of spilled diesel oil the optimal belt speed can be found as the critical value to reach the saturated pickup rate for a given oil thickness. The recovery rate of bunker C oil shows 4-6 times higher than that for diesel oil. And the optimal belt speed for bunker C oil can be found less than that for diesel oil for the same slick thickness.

• Microbiology and Biotechnology Letters
• /
• v.17 no.3
• /
• pp.252-256
• /
• 1989

A marine bacterium which was isolated from the enrichment culture for the emulsification of Bunker-C oil produced a bioemulsifier potently. The strain identified as an Achromobacter sp. M-1220. The bioemulsifier was produced during mid-logarithmic phase in hexadecane oil medium at 18$^{\circ}C$. It appeared to be a cationic peptidolipid substance and showed an active stabilizing effect on the emulsion of crude oils and a few vegetable oils.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.584-590
• /
• 2012

In this study, we have conducted a work on homogenizer development which is operated by high shearing force generated by stator and rotor inside it. To investigate the performance for homogenization and atomization of homogenizer, Bunker-C (IFO 380 cSt) was used as a fuel for experiment. Pre-treatment of bunker-C was carried out with homogenizer developed in this study. Oil purifier was used to investigate effect of oil sludge reduction after pre-treatment. Experimental result showed that the amount of sludge of fuel oil after pre-treatment with homogenizer has decreased by 13 %. To confirm combustion efficiency, Bunker-C which have pre-treatment with homogenizer and purified after are burned in boiler system. The result showed that CO concentration in exhaust gas was decreased. These results mean that if the homogenizer which is developed in this study for marine fuel oil is applied on real vessels, oil costs and operating costs can be reduced.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.151-158
• /
• 2014

The oil sorption capacities and biodegradability of nonwoven fabrics(pads) of PP and PP/kapok(10/90wt%) blend prepared in this study and commercial pad(T2COM: 100% PP) were compared. The biodegradability(58.5%) of PP/kapok(10/90wt%) blend pad was about 5times higher than those(11%) of PP and T2COM pads after 45days. The oil sorption rates of oil sorbent pads for various oils(diesel, lubricant and Bunker C oils) were markedly increased with increasing dipping time up to about 5min and then levelled off. The oil sorption rate and oil sorption capacity were found to increase in the order of PP/kapok(10/90wt%) blend>PP>commercial(T2COM) and Bunker C>lubricant>diesel.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.188-190
• /
• 2012

고전단력을 갖도록 개발된 Homogenizer를 이용해 IFO 380cst Bunker-C 시료를 미립화 및 균질화하는 전처리를 시행하였다. 전처리된 시료의 슬러지 저감효과를 확인하기위하여 유청정기(oil purifier)를 이용하였고, 실험결과 약 13% 가량 슬러지 생성이 감소하는 것을 확인하였다. 또한, 전처리 후 유청정기를 통과한 시료를 실제 보일러 시스템에서 연소시켜 연소 성능 특성을 확인한 결과 CO가 감소하는 경향을 확인하였다. 선박운항비용 분석을 통해 U.L.C.C 기준 연 8,800만원 가량의 연료비 절감 효과가 있을 것으로 추정된다.

• Journal of the Korean Society of Safety
• /
• v.34 no.6
• /
• pp.22-28
• /
• 2019

In South Korea, the enact of Korean Coast Guard Act-1 manages physical and chemical oil-dispersants. Oil snare, which is made of polypropylene, is newly added to the aforementioned act, and it has advantage on the ease of recovery compare to other adsorbents. This study synthesized bunker B-oil with diesel-oil and bunker C-oil to perform an adsorption test based on three samples which were manufactured in South Korea. As a result, adsorption test revealed 5.2 g/g more adsorption than the previous results from the act. Additional toluene test revealed that all the samples satisfied 90.0%, however coloured samples could release its pigment on the marine environment. Thus, colorless samples are recommended on the risk management of marine accidents. The study on the basic direction of the calculation of the test items and the standard value for the quality control of the oil snare was also carried out.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1007-1014
• /
• 2020

IMO(International Maritime Organization) continues to strengthen environmental regulations on exhaust gases such as CO2, NOx, SOx. As for sulfur oxides, from 1 January 2020, all ships on international voyages must use fuel with a sulfur content of 0.5% or less. Or, it is obligatory to use an exhaust gas treatment device that has the same effect. Shipping companies are using low-sulfur oil, replacing them with LNG fuel, or installing scrubbers that suppress sulfur oxide emissions. In the case of ships using bunker C oil, the load on the engine is lower when entering and departing, so the exhaust gas pressure is lowered and the scrubber cannot be properly utilized. Therefore, diesel oil with low sulfur content is used when entering and leaving the coast. When diesel oil is used, exhaust gas is directly discharged through the control system and piping system, and when bunker C oil is used, sulfur oxides are reduced by scrubbers through other control systems and piping systems to discharge exhaust gas. Accordingly, a company has developed a system called a three-way damper valve that can control exhaust gas emissions while integrating these two control systems and piping systems into one. In this study, the control characteristics of the integrated exhaust gas control system and structural safety against external loads in a high-temperature exhaust gas environment were reviewed.

• The Korean Journal of Ecology
• /
• v.16 no.1
• /
• pp.17-26
• /
• 1993

We investigated the ph change of water caused by several fuel gases regarded as the main cause of the air pollution, To find out the main cause of increase of the acidity of the rain. We measured it while injrcting each fuel gas directiy to the distilled water. It was observed that bunker-c oil gas and anthracite coal gas were the main cause to make the ph of the solution lowest. We examined the effects of simulated acidic water solutions on several plant species. Simulated acidic rain made by bunker-c oil gas has significant symptom on the saxifraga stolonifera and commelina communis, while no injury was observed on plants exposed to simulated rainfall made by anthracite coal gas.

• Environmental and Resource Economics Review
• /
• v.16 no.2
• /
• pp.239-273
• /
• 2007

Bunker-C is sold at the different price in the market for international bunkering and for export, though the quality of bunker-c is not much different in two markets. The price difference in two markets tends to increase since 2002 in Korea. This study shows that there is a possibility for a structural change in the price difference in two markets in Korea around June, 2002. In the search for possible explanations for this structural change, empirical analyses found that the price difference in Singapore, which had not have any explanatory power before June, 2002, has explained the price difference in Korea after July, 2002. Other explanatory variable for the price difference was the growth rate of crude oil price in the previous period. The empirical results suggest that the price difference in bunkering market and export market might be explained by the price discrimination which is adopted as a competitive strategy by oil companies in competing with Singapore.