• Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.24-39
• /
• 2021

Background: To address the lack of evidence supporting invasion by three invasive plant species (Imperata cylindrica, Lantana camara, and Chromolaena odorata) in tropical ecosystems, we compared the ecophysiological and leaf anatomical traits of these three invasive alien species with those of species native to Sempu Island, Indonesia. Data on four plant traits were obtained from the TRY Plant Trait Database, and leaf anatomical traits were measured using transverse leaf sections. Results: Two ecophysiological traits including specific leaf area (SLA) and seed dry weight showed significant association with plant invasion in the Sempu Island Nature Reserve. Invasive species showed higher SLA and lower seed dry weight than non-invasive species. Moreover, invasive species showed superior leaf anatomical traits including sclerenchymatous tissue thickness, vascular bundle area, chlorophyll content, and bundle sheath area. Principal component analysis (PCA) showed that leaf anatomical traits strongly influenced with cumulative variances (100% in grass and 88.92% in shrubs), where I. cylindrica and C. odorata outperformed non-invasive species in these traits. Conclusions: These data suggest that the traits studied are important for plant invasiveness since ecophysiological traits influence of light capture, plant growth, and reproduction while leaf anatomical traits affect herbivory, photosynthetic assimilate transport, and photosynthetic activity.

• Applied Microscopy
• /
• v.52
• /
• pp.6.1-6.5
• /
• 2022

We examined the morphology of the fertilized egg and the fine structure of fertilized egg envelopes of Poropanchax normani belonging to the family Poeciliidae, also known as Norman's lampeye using light and electron microscopes. The fertilized eggs with narrow perivitelline space were found to be spherical and demersal, additionally containing small oil droplets in the vitelline membrane. Further, a bundle of adhesive filaments was observed to be present on one side of the fertilized egg. These filaments possessed remarkably high elasticity and were approximately 1-3mm in length. The size of the fertilized egg was determined to be about 1.49 ± 0.07mm (n=30). The outer surface appeared smooth, and adhesive filaments originating at different location of the surface of the envelope were found to be distributed around the egg envelope and were joined together to form a single long bundle in scanning electron microscopic observation. A peak-like structure formed of several straight wrinkles was observed around the micropyle. However, the complete structure of the micropyle could not be studied due to the depth at which it was located. Additionally, the total thickness of the egg envelope was ascertained to be approximately12.5-14.5㎛. The egg envelope consisted of two distinct layers, an outer electron dense layer and an inner lamellar layer, further consisting of 10 sublayers of varying thicknesses. Collectively, it was observed that the morphological characteristics of the fertilized egg, fine structures surrounding the micropyle, outer surface, adhesive structure consisting adhesive filaments, and sections of fertilized egg envelope displayed species specificity.

• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.71-79
• /
• 1998

Silty tidal rhythmites were found from the upper Pleistocene sequence unconformably overlain by the Holocene tidal deposits within the macrotidal coastal zone of Youngjong Island, western coast of Korea. The rhythmites occur as vertically accreted, parallel and planar laminae that are 0.1-2.5 mm in thickness. Each lamina grades from coarse silt (mean grain size: 5-6.5 ${\phi}$) at the lower part into fine silt to mud (mean grain size: 6-7.5 ${\phi}$) at the upper part. The rhythmites can be classified into two types based on the patterns in laminar thickness variation. Type I is a bundle of 12-20 laminae in which laminar thickness varies sinusoidally. Type ll is an alternation of thick and thin laminae as a couplet. Type I is inferred as a product of varying tidal energy during a semimonthly (neap-spring) tidal cycle, in which thicker laminae were deposited during spring tides and thinner laminae were formed during neap tides. Type ll is interpreted to have been formed by asymmetric semidiurnal tidal currents in association with diurnal inequality, whereby thick lamina of each couplet represents dominant tidal current and the thin lamina reflects subordinate tidal current.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.155-165
• /
• 1992

Experiments were conducted to determined the development of the vascular bundles in the peduncle of different tillers on its development in order to improve the vascular system and possibly increase grain yield. The development of the vascular bundle in the leaf, stem and panicle is an important aspect of assimilate translocation and differentiation of panicle characters. Two cultivars were used in this study: IR58, an indica type, and Unbong 7, a japonica type. The main culm(M) had more and bigger vascular bundles in the peduncle and those vascular bundle decreased with tiller order and tiller development. In the primary tillers, P1 had more large and small vascular bundles than P5 in both cultivars. IR58 developed more large vascular bundles compared to Unbong 7, but the small vascular bundle in unbong 7 was more than in IR58. The cross sectional area of phloem and xylem in large vascular bundle decreased with tiller order in both cultivar. Larger area of phloem and xylem in the early formed tillers more efficient transport of assimilates. The number of spikelets, the weight of panicle and grain yield per panicle were highest in the main culm followed by the order of their initiation or emergence. The number of primary and secondary branches to be positive associated with the number and area of vascular bundles. Furthermore, the number of vascular bundles in the peduncle was highly correlated with the peduncle thickness which in turn was correlated with the number of primary and secondary branches on the panicle. These results showed tillers that are initiated early and have relatively ation usually have more vascular bundles, larger peduncle, more spikelets spike let filling and ultimately higher yield.

• KSTLE International Journal
• /
• v.10 no.1_2
• /
• pp.33-36
• /
• 2009

The nuclear steam generator is composed of a bundle of tubes. The length of these tubes is very long, but their diameter is small. Fluid exists inside of the steam generator and its flow causes vibration, therefore these tubes are supported by anti-vibration bars. The wear damage due to the vibration is known as fretting wear, which should be minimized to ensure the safety of the plants. Research needs to be done about decreasing the amount of fretting wear. Hard coatings have proven to be very effective in reducing the amount of wear. The commercial coatings of TiN and CrN have excellent wear resistance and are used to protect the Inconel tube from fretting wear. The tube-on-flat type tester was used for conducting the fretting wear tests. It was found that the wear amounts of the coated tubes decreased depending on the coating thickness. CrN was found to be very effective in reducing the wear, while the wear amounts were dependent on the coating thickness in the case of TiN and a thick coating of TiN was very effective on wear resistance.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.158-160
• /
• 2001

${\beta}-Ga_2O_3$ nanobelts and nanoparticles were synthesized by a thermal annealing of as-milled GaN powders at $930^{\circ}C$ in nitrogen and oxygen atmosphere. respectively. The width of the nanobelts are $20\;nm{\sim}1000\;nm$. the thickness of the nanobelts are 100 nm. A bundle of the nanobelts is several centimeters in length. The lattice structure of these nanobelts and nanoparticles was identified to be a monoclinic ${\beta}-Ga_2O_3$ by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED).

• Korean Journal of Materials Research
• /
• v.13 no.11
• /
• pp.732-736
• /
• 2003

A CP-GFRP(Carbon Powder-Glass Fiber Reinforced Plastic) sensor was fabricated for fracture detection. The electric resistance of the sensor was measured on condition of various composition of carbon powders and thickness of bundle of glass fibers. The resistance of the sensor was decreased as the increase of the content of carbon powders and the TEX of the glass fibers. In the case of loading on CP-GFRP, because inner crack was propagated, the part of percolation structures was disconnected. These observations show the following results. The conduction of CP-GFRP sensor is due to percolation structure of carbon powders and increase of resistance is due to expansion of cracks.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.119-122
• /
• 2004

A CPGFRP(Carbon Powder Glass Fiber Reinforced Plastics) sensor was fabricated for fine crack detection of structures. The electrical resistance of the sensor was measured on condition of various composition of carbon powders and thickness of bundle of glass fibers. The resistance was decreased as the increase of the content of carbon powders and the TEX of the glass fibers. In the case of loading on CPGFRP sensor, because inner crack was propagated, the part of percolation structures was disconnected. The sensor is superior to carbon fiber for the detecting ability of fine crack.

• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.369-373
• /
• 2020

A hydrogen sensor was fabricated by utilizing a bundle of metal oxide nanostructures whose growth positions were selectively controlled by utilizing graphene, which is a carbon of atomic-unit thickness. To verify the reducing ability of graphene, it was confirmed that the multi-composition metal oxide V₂O₅ was converted into VO₂ on the graphene surface. Because of the role of graphene as a reducing catalyst, it was confirmed that ZnO and MoO₃ nanostructures were grown at high density only on the graphene surface. The fabricated gas sensor showed excellent sensitivity.

• Journal of Ceramic Processing Research
• /
• v.20 no.5
• /
• pp.464-469
• /
• 2019

In this study, the electrical conductivity of multi-walled carbon nanotubes (MWCNTs) and polyethylene synthesized by an extrusion process was evaluated. The MWCNTs used exhibited differences in their dispersion characteristics depending on the type of catalyst or synthesis gas used. Thus, the choice of catalyst or synthesis gas significantly affect the physicochemical state of the final MWCNTs and MWCNT-based composites. In this investigation, the characteristics of MWCNTs were analyzed in four cases by introducing ethylene and propylene gas to each catalyst synthesized using deposition precipitation and spray drying methods. The MWCNT-based composites synthesized using the catalyst prepared by deposition precipitation and the ethylene synthesis gas showed the best electrical conductivity. In principle, the morphologies of the MWCNTs indicate that the smaller the aggregate size and bundle thickness, the better the electrical conductivity of the MWCNT composites. This implies that the network is well-formed.