• 대한토목학회논문집
• /
• 제11권4호
• /
• pp.163-170
• /
• 1991

SPOT 위성영상을 이용한 3차원 위치결정에는 해석적사진측량과 수치적사진 측량방법에서의 번들조정이 적용되며, 이를 위해서는 정밀한 상좌표관측과 정확한 지상기준점좌표가 요구된다. 본 연구에서는 지상측량성과의 비교하여 축척에 따른 지형도의 디지타이징된 평면좌표 정확도와 보간된 높이좌표 정확도를 분석하였고, 또한 지상기준점좌표의 획득방법 및 SPOT 영상자료의 형태를 조합하여 번들조정으로 결정된 3차원좌표의 정확도을 비교 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.191-198
• /
• 2001

A numerical analysis of the heat and mass transfer and pressure drop characteristics in modular shell and tube bundle heat exchanger was carried out. Finite Concept Method based on FVM and $k-\varepsilon$ turbulent model were used for this analysis. Condensation heat transfer enhanced total heat transfer rate $4\sim8%$ higher than that of dry heat exchanger. With increasing humid air inlet velocity, temperature and relative humidity, and with decreasing heat exchanger aspect ratio and cooling water velocity, total heat and mass transfer rate could be increased. Cooling water inlet velocity had little effect on total heat transfer.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.297-298
• /
• 2003

Linear density regularity is one of the important characteristics of fiber bundle and yarns, influencing the process performance and the product quality. Analysis on the variation of bundle thickness for various draft ratios and frequencies is therefore of great significance, because an optimum drafting condition can be obtained by establishing the effect of major process factors on the output. (omitted)

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1819-1824
• /
• 2004

The common method to improve heat transfer in Nuclear fuel rod bundle is install a mixing vane in space grid. The previous split mixing vane is guides cooling water to swirl flow in sub-channel of fuel assembly. But, this swirl flow decade rapidly after mixing vane and the effect of enhancing the heat transfer vanish behind this short region. The large scale secondary vortex flow was generated by rearranging the inclined angle direction of mixing vanes to the coordinated directions. This LSVF mixing vanes generate the most strong secondary flow vortices which maintain about 35 $D_H$ after the spacer grid and the streamwise vorticity in subchannel with LSVF mixing vane sustain two times more than that in subchannel with split mixing vane. The turbulent kinetic energy and the Reynolds stresses generated by the mixing vanes have nearly same scales but maintain twice more than previous type.

• Nuclear Engineering and Technology
• /
• 제36권2호
• /
• pp.127-141
• /
• 2004

Various types of integrated steam generators, which integrate IHTS and a steam generator into a single unit of equipment for an LMR, were analyzed using an analytic solution with some simplification. The analysis showed that the undesirable reversed heat transfer, of which occurrence was previously observed only in an integrated single-region bundle type, can also occur in an integrated double-region bundle type. The mechanism of the reversed heat transfer occurrence in the double-region type is explained and it is shown the mechanism in the double-region type is completely different from that in the single-region type. Based on this finding, a method for preventing the aforementioned heat transfer is suggested. The performance of the four types of the integrated steam generators is assessed. For this assessment, a SG is actually designed for each type and the optimization in the geometric parameters and flow rate are optimized.

• 설비공학논문집
• /
• 제17권12호
• /
• pp.1177-1184
• /
• 2005

A numerical analysis was carried out on the heat and mass transfer, and pressure drop characteristics of the modular tube bundle heat exchanger. The finite volume method with a $k-\varepsilon$ turbulence model was used for the analysis. Due to condensation, the total heat transfer rate is observed about $4\~8\%$ higher than that on dry surfaces. Total heat transfer rate increases with increase in the velocity, temperature and relative humidity of incoming air. It also increases with decreasing the aspect ratio of heat exchanger tube. The inlet velocity of cooling water has little effect on the total heat transfer when the other conditions are fixed.

• 소음진동
• /
• 제7권5호
• /
• pp.729-736
• /
• 1997

The subspan oscillation is the most important in bundled transmission lines, which can cause conductor damage and transmission line hardware failures. So it is necessary to analyze the subspan oscillation in details for transmission lines. This paper suggests the basic concept and theoretical analysis method of subspan oscillation for 6 bundle conductor transmission line, which considers wind speed, subspan length and conductor tension. Especially this paper uses a spacer damper model with clamp-arm flexibility and damping characteristics. Theoretical analysis results are proposed.

• Communications for Statistical Applications and Methods
• /
• 제16권6호
• /
• pp.997-1004
• /
• 2009

A standard approach is to classify all of future observations. In some cases, however, it would be desirable to defer a decision in particular for observations which are hard to classify. That is, it would be better to take more advanced tests rather than to make a decision right away. This motivates a classifier with a reject option that reports a warning for those observations that are hard to classify. In this paper, we present the method which gives efficient computation with a reject option. Some numerical results show strong potential of the propose method.

• 로봇학회논문지
• /
• 제11권2호
• /
• pp.51-59
• /
• 2016

In this paper we present (1) analysis of imaging sonar measurement for two-view relative pose estimation of an autonomous vehicle and (2) bundle adjustment and 3D reconstruction method using imaging sonar. Sonar has been a popular sensor for underwater application due to its robustness to water turbidity and visibility in water medium. While vision based motion estimation has been applied to many ground vehicles for motion estimation and 3D reconstruction, imaging sonar addresses challenges in relative sensor frame motion. We focus on the fact that the sonar measurement inherently poses ambiguity in its measurement. This paper illustrates the source of the ambiguity in sonar measurements and summarizes assumptions for sonar based robot navigation. For validation, we synthetically generated underwater seafloor with varying complexity to analyze the error in the motion estimation.

• 대한관절경학회지
• /
• 제10권2호
• /
• pp.203-208
• /
• 2006

목적: 후방십자인대의 경 경골 두 다발 재건술에 있어서 기존의 방법들은 공여 인대가 길어야 하는 문제 때문에 이식건의 선택이 제한적인 경우가 많으며 경골부에서 이중의 고정을 해야 하는 문제점 등이 있다. 이에 저자들은 두 다발 재건술을 실시하면서 경골부에서 초기에 단일 고정으로써 안정성을 얻고, 공여 인대 길이에 제한을 덜 받는 방법을 소개하고자 한다. 수술 술기: 진단적 관절경 검사를 실시 한 후 두 다발 재건술을 위한 이식건을 준비하고, 경골 터널 및 TransFix 고정을 위한 준비를 한다. 대퇴부에 2개의 터널을 만들고, 이식건을 전 내측 입구를 이용하여 경골부, 대퇴부 순으로 통과시킨 후 TransFix를 이용하여 경골부에 고정을 먼저 실시하고, 대퇴부의 2 다발을 각각의 고정 위치에서 고정을 실시한다. 결론: 경경골 터널을 이용한 두 다발 후방십자인대 재건술에서 TransFix를 이용한 경골부의 고정은 단일 고정으로써 강한 고정을 제공하면서 이식건의 길이에 제한을 받지 않고, 전 내측 입구로 이식건을 통과시킴으로써 이식건의 손상을 방지할 수 있는 좋은 방법이라고 생각한다.