• Journal of Korea Soil Environment Society
• /
• v.3 no.1
• /
• pp.75-81
• /
• 1998

In most of studies on solidification/stabilization with waste, small columns have been used to examinate adsorption or leachate. However, these experiments using small apparatus have been limited to apply with the field. In this study, considering an application to the field, a large Lysimeter(100cm$\times$100cm$\times$100cm) used for the simulation. Then, the open dumping waste was mixed directly with bentonite to simulate the stabilization of waste, environmental aspects and several basic tests. As a result, the concentration of heavy metals and contaminated substances changed with bentonite rate. Most of contaminated substances were decreased in leaching with increased mixing rate of bentonite. Especially, the concentration of CODcr removed 25~30%. Also, the residual soil in dumping waste produced approximately 80% of total volume by 40$\times$40mm screen.

• Archives of Craniofacial Surgery
• /
• v.24 no.6
• /
• pp.273-277
• /
• 2023

Background: The clinical characteristics of pediatric nasal fractures can vary depending on the child's age, social activities, and environment. Therefore, this study aimed to analyze these characteristics in different age groups. Methods: We retrospectively reviewed of a series of patients aged under 12 years who received treatment between 2013 and 2021. The initial study design involved dividing the patients into four age groups, corresponding to different developmental ages, but there were no cases in infants aged 0 to 1 year. Therefore, the patients were divided into three groups: group I, between 2 and 5; group II, between 6 and 9; and group III, between 10 and 12 years of age. The following parameters were evaluated: sex, age, etiology, fracture type and severity, and the incidence of septal injuries. Results: In total, 98 patients were included in this study. In group III, the ratio of boys to girls was 3.88:1, exceeding the overall ratio of 1.97:1. The most common cause varied with age: slipping down in group I, bumping accidents in group II, and sports accidents in group III. Concomitant septal injuries were present in 4.17% of patients in group I, 5.71% of patients in group II, and 28.21% of patients in group III. Conclusion: Increasing age was accompanied by a greater tendency for male predominance and a higher prevalence of sports-related causes and septal injuries. Violence was infrequent but started to become a contributing factor during school age. These varying environmental factors across age groups can offer valuable insights into the epidemiology and clinical characteristics of pediatric nasal bone fractures.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.845-853
• /
• 2023

The Ministry of Employment and Labor announced a roadmap for reducing serious accidents to create a "safe and healthy workplace, happy Korea" and ordered a risk assessment for all work processes in all workplaces on November 30, 2022. Accordingly, even workplaces that handle new chemicals must conduct risk assessment when introducing new chemicals, but the risk assessment techniques currently proposed by the government focus on preventing conventional accidents such as falls, getting caught, and bumping. Currently, there is a Chemical Hazard Risk Management (CHARM) technique that is most commonly used for chemical risk assessment, but in small and medium-sized businesses that lack professional manpower related to chemical substances, there are many technical terms in the technique and it is difficult to interpret, so its utilization is very low. Therefore, the purpose of this study is to present a method that can make risk assessment easier and simpler before handling new chemicals so that it can be used well in small and medium-sized businesses that lack professional manpower related to chemical substances. Through actual cases, the method of using CHARM was confirmed step by step, and based on this, risk reduction establishment and execution methods were derived. Based on the results of this study, it is expected that it will be used as the best tool for preventing accidents such as acute poisoning when handling chemicals in small and medium-sized workplaces that lack professional manpower related to chemical substances and make every effort to protect workers' health.

• Korean Journal of Ecology and Environment
• /
• v.51 no.3
• /
• pp.234-244
• /
• 2018

The roadkill that animals die after bumping by vehicles on the roads is acting as a factor to decrease the size of various animal populations. It has also been known to be the biggest artificial causations of Vertebrata deaths not only in urban areas but also protected areas such as national parks. Nevertheless, in the national park areas which are major protected national areas for conservation of national biodiversity and ecological diversity, snake roadkills occur frequently. Up to date, related studies are rare. Therefore, in this study, we described snake roadkill patterns on the roads in six national parks between 2006 and 2015. We identified total 736 snake roadkills compromising 10 different species. Five species, Rhabdophis lateralis, Elaphe dione, Gloydius ussuriensis, Lycodon rufozonatus, Gloydius brevicaudus occupied more than 91.7% of total roadkill cases. Active forager snakes were killed by roadkills more than ambush foragers, and the snake roadkill frequency was the highest in September, a migration period and in August when the young individuals dispersed at between 100 and 799 m altitude areas. Roads where roadkills were frequent lie between forest and hydrosphere or between forest and crop field road sides. Our results could be used to identify the trend of snake roadkills on the roads in national parks, and to establish effective roadkill mitigation measures and policies.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.1
• /
• pp.99-144
• /
• 2016

The summary of the case is as follows: a Korean passenger booked and purchased a business class ticket from Air France that was scheduled to depart from Paris and arrive in Seoul. When the passenger arrived at the check-in counter, he was told that all business class seats were occupied. It was because the flight was overbooked by Air France. The passenger cancelled the Air France flight and took another air carrier. After arriving in Korea, he brought suit against Air France for damages. The purpose of this article is to discuss the governing law when interpreting the contract of international air carriage in accordance with the Korean Private International Act (2001) and to analyze air carrier's civil liability for the bumped passenger in the overbooking case. If the parties have not chosen the applicable law the contract shall be governed by the law of the habitual residence of the consumer in the following situations: prior to the conclusion of the contract, the opposite party of the consumer conducted solicitation of transactions and other occupational or business activities by an advertisement in that country or conducted solicitation of transactions and other occupational or business activities by an advertisement into that country from the areas outside that country and the consumer took all the steps necessary for the conclusion of the contract in that country or in case the opposite party of the consumer received an order of the consumer in that country [Article 27 (1), (2) of the Private International Act]. Since the contract of international carriage falls into the consumer contract, the Supreme Court viewed that the governing law of the contract in this case would be the law of the habitual residence of the consumer (Supreme Court Decision 2013Da8410 decided on Aug. 28, 2014). This interpretation differs from the article 5 (4) of Rome Convention(80/934/EEC) which declares that the consumer contract article shall not apply to neither a contract of carriage nor a contract for the supply of services where the services are to be supplied to the consumer exclusively in a country other than that in which he has his habitual residence. Even though overbooking can be considered as a common industry practice, an air carrier must burden civil liability in case of breach of contract for the involuntary bumped passenger(Seoul Central District Court Decision 2014Na48391 decided on Jan. 29, 2015). In case of involuntary bumping, an air carrier must offer re-routing to passenger's final destination by an alternative flight. If an air carrier fails to effect performance in accordance with the tenor and purport of the obligation, the involuntary bumped passenger may claim damages(Article 390 of the Civil Code).

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.63-96
• /
• 2013

Recently, U.S. Department of Transportation (DOT) expanded the "Enhancing Airline Passenger Protections" on August 23, 2011 and October 24, 2011. The Rule regulates tarmac delays, denied boarding compensation, customer service plans, and fare advertising. The adopted rule is to protect passengers by improving passenger service requirements on U.S. national or domestic carriers and foreign air carriers as well. The major issues are as follows: First, regarding to so called Tarmac Delay, carriers must establish a Tarmac Delay Contingency Plan setting forth the number of hours the carrier will permit an aircraft to remain on the tarmac at U.S. airports before allowing passengers to deplane. Carriers also must provide passengers with food and water in the event the aircraft remains on the tarmac for two or more hours and must provide operable lavatories and medical attention while the aircraft remains on the tarmac, irrespective of the length of the delay. Carriers also must create and retain records regarding tarmac delays lasting more than three hours. Also they need to update passengers every 30 minutes during a tarmac delay of the status of the flight and the reason for the delay, allow passengers to deplane if the aircraft is at the gate or another disembarkation area with the door open. Second, carriers now must adopt a "Customer Service Plan" that addresses offering customers the lowest fares available, notifying customers about delays, cancellations, and diversions; timely delivery of baggage; accommodating passengers' needs during tarmac delays and in "bumping cases"; and ensuring quality customer service. Third, the new regulations also increase minimum denied boarding compensation limits to $650 / $1,300 or 200% / 400% of the fare, whichever is less. Last, the DOT also has modified its policies related to enforcement of Rules pertaining to full fare advertising. The Rule states that the advertised price for air transportation must be the entire price to be paid by the customer. Similarly, Korea revised the passenger protection clauses within Aviation Act. However, it seems to be required to include various more issues such as Tarmac Delay, oversales of air tickets, involuntary denied boarding passengers, advertisements, etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.226-226
• /
• 2008

지난 10여년 동안 Sn-3.0Ag-0.5(wt%)Cu 합금은 대표 무연솔더 조성으로 다양한 전자제품의 실장 및 접합에 적용되어 왔으며, 그 신뢰성 역시 충분히 검증된 바 있다. 그러나 최근 Ag 가격의 급격한 상승과 솔더 접합부의 내 충격 신뢰성을 보다 향상시키고자 하는 업계의 동향은 Ag의 함량이 낮은 무연솔더 조성의 적용 확대를 유도하고 있다. 이에 따라 본 연구자들은 저 Ag 함유 무연슬더로 Sn-1.2Ag-0.5Cu-0.4In 조성을 제안한 바 있는데, 이는 Sn-3.0Ag-0.5Cu 조성 이상의 solderability를 가지면서도 그 금속원료 가격이 약 20% 가량 저렴한 특징을 가진다. 또한 열 싸이클링 (cycling) 테스트를 통한 슬더 조인트의 신뢰성을 평가한 결과, Sn-3.0Ag-0.5Cu에 크게 뒤떨어지지 않는 양호한 특성이 관찰되었다. 따라서 본 연구에서는 열 싸이클링 테스트와 더불어 최근 그 중요성이 지속적으로 커지고 있는 내 충격 신뢰성 평가 시험을 실시하여 개발된 4원계 무연솔더 조성의 기계적 특성을 기존 무연솔더 조성과 비교, 분석해 보았다. 각 솔더 조성은 솔더 볼 형태로 제조되어 CSP(Chip Scale Package) 상에 범핑 (bumping)되었으며, CSP를 PCB(Printed Circuit Board) 상에 실장하는 공정에서도 Sn-3.0Ag-0.5Cu 및 Sn-1.2Ag-0.5Cu-0.4In의 두 종류의 솔더 페이스트가 사용되었다. 본 연구에서의 내 충격 신뢰성 시험에는 자체 제작한 rod drop 시험기를 사용하였는데, 고정된 CSP 실장 board의 후면 부위를 일정한 높이에서 추를 반복적으로 자유 낙하시켜 급격한 충격을 주는 방식으로 실험을 실시하였다. 이 때 추의 무게는 30g, 낙하 높이는 10cm 였으며, 추의 낙하 시 측정된 board 의 휨 변위량은 약 0.7mm로 측정되었다. 사용된 CSP와 PCB 는 모두 daisy chain 방식으로 연결되어 있기 때문에 저항측정기를 사용한 간단한 실시간 저항 측정 방법으로 시험 이력에 따른 파단부의 발생 시점과 대략의 위치를 손쉽게 확인할 수 있었다. 솔더 조인트의 파단 기준 저항값으로 $1000\Omega$을 설정하였으며. 각 조건 당 5 개 이상의 샘플에 대해 평가를 실시한 후 그 평균값을 조사하였다. 시험 결과 제안된 Sn-1.2Ag-0.5Cu-0.4In 조성은 대표적인 저 Ag 함유 조성인 Sn-1.0Ag-0.5Cu에 비해서는 떨어지는 내 충격 신뢰성을 나타내었지만, 우수한 연성에 기인하여 Sn-3.0Ag-0.5Cu 조성에 비해서는 약 2 배 이상 우수한 신뢰성이 관찰되었다. 또한 CSP의 실장 시 Sn-3.0Ag-0.5Cu보다 Sn-1.2Ag-0.5Cu-0.4In 조성 솔더 페이스트를 적용한 경우에서 보다 우수한 내 충격 신뢰성을 나타내어 기본적으로 개발된 Sn-1.2Ag-0.5Cu-0.4In 솔더 페이스트가 Sn-3.0Ag-0.5Cu 조성의 기존 솔더 페이스트 보다 내 충격 신뢰성이 우수함을 검증할 수 있었다. 각 조성의 솔더 조인트를 $150^{\circ}C$ 에서 500시간 aging한 후 실시한 내 충격 신뢰성 평가에서는 모든 조성에서 그 신뢰성이 급감하는 경항을 나타내었으나, Sn-1.2Ag-0.5Cu-0.4In가 Sn-l.0Ag-0.5Cu보다도 그 상대적인 신뢰성이 우수한 것으로 관찰되었다. 이와 같이 aging 후 실시하는 충격시험은 가장 실제적인 상황과 유사한 조건이므로 상기의 실험 결과는 매우 고무적이었으며, 이에 대한 보다 면밀한 분석이 요청되었다. 마지막으로 파면 및 미세조직 관찰을 통하여 각 조성에서의 충격 파단 특성을 비교, 분석해 보았다.