• East Asian Economic Review
• /
• v.23 no.2
• /
• pp.149-168
• /
• 2019

Public information arrivals and their immediate incorporation in asset price is a key component of semi-strong form of the Efficient Market Hypothesis. In this study, we explore the impact of public information arrivals on cryptocurrency market via Twitter posts. The empirical analysis was conducted through various methods including Kapetanios unit root test, Maki cointegration analysis and Markov regime switching regression analysis. Results indicate that while in bull market positive public information arrivals have a positive influence on Ripple's value; in bear market, however, even if the company releases good news, it does not divert out the Ripple from downward trend.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.920-926
• /
• 2021

Capsules containing NaCl-MgCl₂ salt with 316L stainless steel or alloy N samples were irradiated in the Ohio State University Research Reactor for 21 nonconsecutive hours. A custom irradiation vessel was designed for this purpose, and details on its design and construction are given. Stainless steel samples that were irradiated during exposure had less corrosive attack than samples exposed to the same conditions without irradiation. Alloy N samples showed no significant effect of irradiation. This work shows a method for conducting in-reactor irradiation-corrosion experiments in static molten salts and presents preliminary data showing that neutron irradiation may decelerate corrosion of alloys in molten chloride salts.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.2
• /
• pp.187-192
• /
• 1992

The classical trajectory method, previously applied to the reactions of polyatomic molecules with fcc structured metal solids[S. C. Park, C. H. Cho, and C. H. Rhee, Bull. Kor. Chem. Soc., 11, $1(1990)]^1$ is extended to the collision energy dependence of the reaction of the Al solid by $SiCl_4$ molecules. We have calculated etching yields, degrees of anisotropy, kinetic energy distributions, and angular distributions for the reactions of the Al solid and compared with those for the reactions of the Cu solid. Over the range of collision energies we considered, the reactions of the Al soIid show higher etching yield and better anisotropy than the reactions of the Cu solid. Details of reaction mechanisms and the relevance of these calculations for the dry etching of CuAl alloy are discussed.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.245-247
• /
• 2015

The Building Information Model (BIM) is gaining wide popularity in the construction industry. This attempt is, however, limited to a predefined operation of structural facilities. The application of BIM can be extended to include undefined operations in earthwork construction. The objective of this paper is to introduce the concept of an earthwork BIM environment that is currently under development in the Construction System Laboratory at Pusan National University. First, this paper defines the concept of earthwork BIM. Second, it discusses the key aspects of earthwork BIM, including 1) geographical information, 2) equipment configuration, and 3) equipment position. In the future, the 3D BIM environment will be tested at an actual construction site to determine its applicability, and it will be extended to include construction equipment such as bull dozers and pay loaders.

• Journal of Embryo Transfer
• /
• v.26 no.1
• /
• pp.65-70
• /
• 2011

This study was conducted to investigate the survival rate of AndroMed and Tris-egg yolk extender for cryopreservation of Korean Native Bull Semen (Chick Cow). Semen was collected from a Korean Native Bull Semen over 3 year's old. The semen was diluted 1:1 by AndroMed and Tris-egg yolk extender. The pellet was diluted to final sperm concentration of $5{\times}10^7$ cell/ml by doubling in every 10 minutes at $4^{\circ}C$ cold chamber. The semen was equilibrated for 1 hrs at cold chamber and packed to 0.5 ml straw. The semen straws were located above 5 cm of liquid nitrogen for 5 minutes. And then the frozen straw was plunged to LN2. The presented straws were examined the viability and motility after thawed at $37^{\circ}C$ water bath. The survival rates was significantly higher (p<0.05) in Tris-egg yolk extender than AndroMed extender ($89.7{\pm}19.8$ vs. $73.4{\pm}11.2$). However, motility was no significant differences ($78.4{\pm}18.7$ vs. $67.9{\pm}14.6$). Survival rate in time of equilibration between visual and CASA program had higher in 2 h ($86.33{\pm}9.4$ vs. $92.32{\pm}12.4$) than in 5 h ($78.20{\pm}7.8$ vs. $88.28{\pm}13.1$) 15 h ($65.24{\pm}6.6$ vs. $76.48{\pm}17.3$) 20 h ($56.26{\pm}4.6$ vs. $67.73{\pm}18.4$). The development rates to cleavage was higher in Tris-egg yolk extender than AndroMed extender (82.2% vs. 81.7%). Similarly, the development rates to blastocyst was significantly higher (p<0.05) in Tris-egg yolk extender than AndroMed extender (42.3% vs. 29.6%). In conclusion, the obvious impact of this study will be its practical application to improve viability and fertilizing ability of cryopreserved spermatozoa used for in vitro fertilization (IVF) and AI, Which in turn will be beneficial to animal genetic resources conservation.

• Reproductive and Developmental Biology
• /
• v.35 no.3
• /
• pp.377-383
• /
• 2011

The objective of this study was to examine effect of ethylene glycol for semen cryopreservation in Korean Jeju Black Bull. The semen was cryopreserved with extenders containing cryoprotectants (7% glycerol and 3%, 5%, 7% ethylene glycol) and packed to 0.5 ml straws. The semen straws were located above 3 cm of liquid nitrogen for 5 min, 5 cm for 10 min and 8 cm for 10 min. And then frozen straw was plunged into $LN_2$. Post-thawed sperm motility, viability and membrane integrity were significantly higher in 5% ethylene glycol ($72.5{\pm}5.00%$, $54.88{\pm}0.66%$ and $46.00{\pm}2.40%$; p<0.05). Motility and viability were similar between 7% glycerol and 5% ethylene glycol. However, the membrane integrity was significantly higher in 5% ethylene glycol ($34.69{\pm}4.64%$ vs $46.00{\pm}2.40%$; p<0.05). The viability and membrane integrity were significantly higher in 5 cm for 10 min and 8 cm for 10 min than 3 cm for 5 min (viability: $55.81{\pm}2.94$, $55.19{\pm}3.34$ vs $47.94{\pm}3.48%$; p<0.05 and membrane integrity: $44.94{\pm}3.51$, $46.06{\pm}2.25$ vs $40.38{\pm}1.03%$; p<0.05). The percentage of capacitated sperm assessed by CTC staining, percentage of F pattern was higher in 7% glycerol, 5% and 7% ethylene glycerol, and AR pattern was significantly higher in 3% ethylene glycol. F pattern was significantly increased in 5 cm for 10 min and 8 cm for 10 min (p<0.05), but AR pattern was significantly increased in 3 cm for 5 min (p<0.05).

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.597-609
• /
• 2014

To find out the effect of commercially available energy drinks on tooth enamel erosion, analyzed pH, buffering capacity, and the content of some of the inorganic components selecting 4 energy drinks that has high affinity of the products currently being sold. In addition, by observing the degree of erosion before and after immersion in energy drink by surface microhardness and scanning electron microscope (SEM) the results were as follows: Acidity of energy drink 'Burn Intense' was the lowest as $2.78{\pm}0.01$ highest on distilled water as $6.475{\pm}0.01$. 'Burn Intense' buffering capacity was $3.48{\pm}0.155$ at pH 5.5, $1.88{\pm}0.15$ at pH 7.0 which is the highest, and 'Hot6' was $1.71{\pm}0.37$, $1.23{\pm}0.35$ on each of it showing the lowest points. Ca content on energy drink was the highest at 'Volt Energy' as ($77.21{\pm}2.70mg/kg$), the lowest at 'Hot6' as ($0.98{\pm}0.05mg/kg$). P content was the highest on 'Hot6'($1.34{\pm}0.05mg/kg$) and detected at 'Red Bull'. Enamel surface hardness variation of the energy drinks before and after immersion showed rapid decrease at 'Red Bull' ($66.65{\pm}35.60$), and 'Volt Energy' ($61.96{\pm}31.42$), 'Burn Intense' ($58.53{\pm}24.84$), 'Hot6' ($53.99{\pm}60.26$) was in order. Distilled water, the control group, showed significant difference with the experimental group (p<0.05). But there was no significant difference between energy drinks. At SEM observation and analysis, 'Burn Intense' was the most severe demineralization, 'Volt Energy', 'Hot6', 'Red Bull', distilled water was in order. In the above results, taken together there were no statistically differences between energy drinks but significant difference in comparison with distilled water. In addition, at SEM observation and analysis all energy drink caused dental erosion, especially 'Burn Intense', has the lowest acidity, was serious. Thus, it is believed to provide a variety of oral health education and information about energy drinks that can affect the erosion of the teeth so public have the right to be recognized and reasonable dental care.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.440-449
• /
• 2007

This study was conducted to investigate the compositions of different cuts of Hanwoo bull beef. 10 cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yangi(brisket)] were prepared from 10 Hanwoo bulls (-24 month old) slaughtered during 3 consecutive days. There were no significant differences in the calorie contents among the 10 cuts (p<0.05). In cholesterol content, Hongduke was significantly lower (26.74 mg/100 g) and Abjin was significantly higher (31.08 mg/100 g) than the other cuts (p<0.05). Free amino acid analysis revealed that there were high contents of glutamate (94.33-216.36 mg/100 g) and alanine (154.88-200.31 mg/100 g), followed by arginine, phenylalanine and lysine in the 10 cuts. In addition, Abjin, Bosup, Cheggt, Hongduke, Sulgit and Udoon had significantly higher inosine monophosphate (IMP) contents than Dngsim or Moksim (p<0.05). Inosine contents were highest in Bosup and Sulgit, whereas hypoxanthine contents were highest in Guri (p<0.05). Total collagen contents were significantly higher in Abjin followed by Yangi, Guri and Moksim (p<0.05). With regard to fatty acid composition, Dngsim had significantly higher $C_{18:0}$ than the other cuts, and Udoon had significantly higher $C_{20:4n6}$ than the other cuts (p<0.05). Total contents of saturated fatty acids (SFA) were significantly higher in Abjin, Dngsim and Yangi, whereas total contents of unsaturated fatty acids (UFA) were significantly higher in Hongduke than the other cuts (p<0.05).

• Journal of agriculture & life science
• /
• v.53 no.4
• /
• pp.77-92
• /
• 2019

The purpose of this study was to investigate the carcass characteristics and the primal cut yields from carcasses according to the sex of Hanwoo. Experimental animals comprised of 80 cows, 29 bulls, and 71 steers. After slaughtering, they were evaluated to estimate the productivity of carcass components by market weight, and to predict the beef carcass yield. The average of fasting weight of cow, bull and steer were 634.75 kg, 721.86 kg, and 754.10 kg respectively. Market weight of Hanwoo at cold carcass weight, primal lean cut weight, sub-primal lean cut weight, bone weight and fat weight were 381.01~467.60 kg, 240.79~310.36 kg, 208.27~276.47 kg, 57.23~76.28 kg and 89.19~138.97 kg respectively. Body measurement traits had side length, hindquarter length, cervical vertebrae length, lumbar vertebrae length, sacral vertebrae length, 6th lumbar vertebrae~heel length, 5~6th thoracic vertebrae breadth, 4~5th lumbar vertebrae breadth, 5th sacral vertebrae breadth, 7~8th thoracic vertebrae girth and 7~8th thoracic vertebrae thick were highest length in steer. Carcass weight (CW) were significantly (p<0.05) affected by sex and live weight. The lean meat percentage, fat percentage and bone percentage based on the weight of cold carcasses were significantly different (p<0.05) between sex groups. The primal cuts rate for deungsim, moksim, abdari, udun, suldo, yangjee and satae were higher in bulls than those of the caws and steers. The carcass by-product weight rate in steer had lower oxtail and rib cartilage than cow and bull, while cow showed lower beef leg bones and jappyeo than bull steer (p<0.05). Body measurement traits was always important for primal cut weight estimates.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.1
• /
• pp.75-78
• /
• 2000

The present study was conducted for the data of toxicity and taste components of the pufferfish, Sphoeroides annulayus (bull's eye fuller), transported from Mexico. All other parts including muscle and skin were nontoxic ranging below $10\;{\mu/g$ except gonad, The amounts of IMP and ADP were $5.6\;{\mu}mol/g\;and\;2.7\;{\mu}mol/g$, and the ratio to the total ATP and its related compounds was $41.1{\%}$. The great portion of free amino acids in the muscle of the puffer was occupied by L-glycine, L-alanine, L-anserine, L-threonine and L-valine. Their amounts were $233.5 mg/100 g, 169.0 mg/100 g, 149.1 mg/100 g, 135.7 mg/100 g and 132.3 mg/100 g$. Their concentration ratio to total free amino acids were $14.28{\%},\;10.33{\%},\;9.12{\%},\;8.30{\%}\;and\;8.09{\%}$, respectively. The content was $50.12{\%}$ of the total free amino acids. In addition, the amounts of taurine and L-histidine were 119.3mg/100 g and 14,7 mg/100 g.