• 한국축산시설환경학회지
• /
• 제13권2호
• /
• pp.121-128
• /
• 2007

축산분뇨와 톱밥을 혼합하여 수분조절을 한 후 발효조에 투입하는 방식이 아닌 발효상에 미리 투입된 톱밥위에 축산분뇨를 살포하면서 교반처리하여 발효증발 처리하는 시스템을 이용하여 퇴비 발효층의 온도, 수분함량, 수분수지, 퇴비의 비료성분을 연구하였다. 1. 본 처리공정은 과다한 수분을 신속하게 침출수 강제배출 방식으로 배출하여 슬러리 투입분뇨의 함수율이 높더라도 수분증발이 이루어지고 발효상 함수율은 $65{\sim}73%$ 전후로 유지되었다. 2. 연속퇴비화 과정에서 시험기간 중에 10.6% 정도의 침출수가 발생되었다. 또한 5개월 가동 기간 동안 톱밥 $1m^3$ 투입 당 $3.16m^3$의 돈분슬러리 처리가 가능하였다. 3. 침출여과액은 오염물질농도가 낮아져 투입분뇨 대비 BOD는 86.5%, SS은 96.2% 저감되었다. 4. 퇴비사의 미기상 분석결과 상대습도는 낮 시간을 제외한 야간시간에는 $80{\sim}100%$로서 높았다. 퇴비사의 습도가 높아지면 퇴비화 과정 중 수분증발 효율이 저하의 원인이 될 것으로 사료된다.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.49-58
• /
• 2011

The maximum drying shrinkage velocity was proposed to verify bulk and stiffness improvement mechanism during drying according to papermaking parameters. It was based on the wet-web shrinkage behavior without the restraint of wet-web during drying, so intact drying impact could be measured. Bulking agent reduced the drying shrinkage and the maximum drying shrinkage velocity, so paper bulk increased and paper strength decreased. When adding cationic starch to stock with the bulking agent for strengthening, the bulk was increased further with additional decreasing of the drying shrinkage and the maximum drying shrinkage velocity. Paper strength also increased except tensile stiffness index with decreasing the drying shrinkage and the maximum drying shrinkage velocity. When using additional strength additives for strengthening of fiber interfaces extended by bulking agent and cationic starch, amphoteric strength additive increased paper stiffness without loss of paper bulk. It was considered that the added amphoteric strength additives were cross-linked to the stretched cationic starch and this cross-linking increased elasticity of fiber-polymer-fiber interfaces without changing the drying behavior. Paper bulk could be increased with decreasing the maximum drying shrinkage velocity. The drying shrinkage of paper also could be controlled by fiber-to-fiber bonding interfaces by the bulking agent. In this case, paper strength including stiffness was decreased by reducing fiber-to-fiber bonding but it could be improved by strengthening fiber-to-fiber interfaces with polymer complex without loss of bulk.

• 농업과학연구
• /
• 제46권4호
• /
• pp.897-905
• /
• 2019

To compare the composting characteristics of food waste supplemented with various bulking agents, aerated composting was performed by mixing sawdust, ginkgo leaves, insect feces, and mushroom waste at ratios of 6 : 4 (w/w). The initial temperatures (day after treatment [DAT] 3) of the sawdust, ginkgo leaves, insect feces and the mushroom waste mixtures were 39, 58, 65, and 51℃, respectively. The DAT 3 temperature was the highest in the food waste-insect feces mixture (65℃) and the lowest in the sawdust one (39℃). However, the insect feces treatment was terminated at DAT 21 because of a high water content (70.92%). The water content (DAT 56) of the composted food waste supplemented with sawdust, mushroom waste, and ginkgo leaves stood at 51.28, 39.81, and 44.92%, respectively. Therefore, the fully mature composts satisfied the water content requirement of less than 55% as recommended in the fertilizer standards of the RDA of Korea. The results of the CoMMe-101, Solvita and seed germination index methods indicate that the mushroom waste and ginkgo leaves treatments matured relatively quicker than that of the sawdust one. Based on the above observations, it is concluded that the mushroom waste and ginkgo leaves are more effective bulking agents compared to sawdust and as such, are recommended as suitable replacements for sawdust in food waste composting.

• 한국환경보건학회지
• /
• 제22권4호
• /
• pp.82-90
• /
• 1996

This study was performed to find the optimum mixing ratio of paper waste in composting of mixture of swine feces and newspaper. Using the experimental setting of aeration rate which was found in the experiment carried out priorly, and moisture contents reported in other literature, just the initial C:N ratios were differentiated by mixing different amount of newspaper with the same amount of swine feces. This study was carried out by operating 4 experimental cornposting reactors of bench scale for 3 weeks. The followings are the conclusions that were derived from this study. 1. During composting reaction, the C:N ratio of each cornposter was decreased. Degree of decrease was in order of run 3, run 2, run 4, and run 1 of which initial C:N ratio was 30, 25, 35, and 20 respectively. All of the final composts were found to be completed composting reaction. 2. Ash contents of each reactor increased rapidly in order of run 3, run 2, run 4, and run 1. The absolute values of quadratic effect coefficients of each second order regression function was 0.059, 0.038, 0.032, and 0.030 respectively. Ash contents evolution trend had a linear correlation with the C:N ratio trend. (r=-0.96932, p<0.05) 3. The range of highest temperatures reached during composting was 47.2-53.5$\circ$C. Those were not significantly different from one another. Thermophilic temperatures were maintained in the range of 48-108 hours. 4. Contents of heavy metal detected in the final compost were lower than those of Korean and European standards. 5. Concentration range of Nitrogen in the final compost was 1.11-2.27%, and that of phosphorus was 8.40-10.70 mg/kg. 6. The optimum C:N ratio which has been proposed without the consideration of types of bulking agents should be re-examined. Biodegradabilities of each bulking agents was thought to be important factor when determining the optimum initial C:N ratio for cornposting.

• 멤브레인
• /
• 제11권4호
• /
• pp.170-178
• /
• 2001

상전환 방법에 의해 PVC계 MF막을 제조하여 환성슬러지가 포함된 폐수 처리용 MBR (Membrane bioreactor)에 적용하였다. 막 제조시 첨가제의 농도에 따른 막 특성을 확인한 결과 첨가제의 농도가 증가할수록 기공 크기가 증가하였으며 친수화도 역시 향상되었다. MBR의 내부 환경변화에 따른 실험을 통해 제조한 막의 투과 성능 및 막에 발생하는 막 오염 거동을 조사하였다. 사상균의 생성으로 인한 Sludge bulking 시 막 오염 현상이 가속화되었으며, 이 때 각 시료의 Rc을 조사한 결과 CP-0 > CP-1.0 > CP-1.5의 순으로 나타났고, 정상상태와 비교하여 sludge busking시 Rc값은 3.5~7배가지 증가하였다. 표면 특성이나 투과 유속면에서 PVP 1.5 wt% (CP-1.5)를 첨가하였을 때가 가장 적합하였다. 평균 투과 유속은 시료 모두에서 12(${\pm}$2) L/$m^2$hr 정도였으며, 평균 COD 제거율은 98.8% 정도를 나타내었다 MBR 운전에 있어 sludge bulking시 사상균이 차지하는 비율과 미생물의 모양과 크기에 따라 막 오염은 가속화 되었고, 투과 유속 감소를 보였다. 따라서 막 여과 특성은 막의 친수화 정도와 MBR 내부 미생물의 성장 조건과 환경에 의해 결정되는 것을 알 수 있었다.

• 한국환경보건학회지
• /
• 제30권1호
• /
• pp.7-14
• /
• 2004

The change in filamentous bacteria appearance was observed by adjusting factors such as organic and nurient concentration of feed wastewater and the aeration rate in the reactor. In case that COD:N:P and DO were 100:10:1 and 6.1 m1/1 respectively, the mean SVI was 122 ml/g and the filaments were developed normally in flocs. For the low DO con- dition, however, the SVI averaged 186 ml/g and the appearance of outgrowing filaments were more frequent. When the high organic was supplied into the reactor, the average SVI was 274 ml/g and the distinct filamentous bulking was observed. Meanwhile when COD:N:P was maintained at 100: 1 :0.5, the SVI was as low as 87 ml/g and the appearance of filaments were minimal and the size of flocs was small comparing other experimental conditions. For normal, low aeration and high organic concentration, predominant filaments in the early stage of experiments were commonly Type 021N,S. natans which were usually found in low DO condition. However, Type 041, Type 1851, Type 0961 became predominant as experiments extended. Meanwhile, in low nutrient condition, Type 0675, Type 1851, and Type 0961 were observed. The filamentous bacteria appearance for SVI< 150(ml/g), Type 0041, Type 0961 (usually low organic in feed wastewater) were predominantly observed and SVI > 150(ml/g), S. natans and Type 021N(usually low DO in aeration basin) was predominant.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.237-244
• /
• 2017

At present, in India, handling of solid waste has become a major challenge for the municipal authorities. Composting of solid waste, especially organic waste, can be one of the solutions to tackle the issue of handling solid waste. The present study is focused on agitated piles composting of flower waste (FW). Five combinations of FW with dry leaves (DL) and cow dung (CD) were prepared to conduct the study. Significant changes were observed due to the addition of bulking agent. The bulking material helps to reduce the production of leachate and also to maintain the aerobic condition within the piles. The reduction of total organic carbon was 21% in FW composting which increased by 36.48% during the composting of FW on addition of DL and CD. On the 120th day of composting, the pH of pile five (70 kg FW + 20 kg CD + 15 kg DL) was 7.33, electrical conductivity 2.77 mS/cm, total organic carbon 26.9%, total nitrogen 2.2%, and C:N ratio was 12. Appropriate proportion of waste mixture played an important role in providing favorable conditions for the microbial transformation of flower waste to stabilized compost. Finally, FW with the combination of CD and DL was found to be successful during pile composting.

• 한국철도학회논문집
• /
• 제12권5호
• /
• pp.811-818
• /
• 2009

본 연구에서는 시공중인 터널의 변상에 대한 원인을 규명하고 접근이 불가능한 일부 변상부에 대한 경험적 규모산정기법을 제시하였다. 부피팽창계수(bulking factor)를 이용한 변상부 규모예측 결과는 토모그래피용 시추공내 시추자료를 이용한 결과와 비교 분석하였으며 제시한 경험적 기법의 정확도를 확인하였다. 한편 변상부의 진행성 파괴 여부를 예측하기 위하여 미소파괴음(acoustic emission) 기법을 도입하여 계측을 수행하였으며 이 결과, 추가적인 진행성 파괴는 없는 것으로 파악되었다. 향후에는 미소파괴음 기법을 이용한 터널의 건전도 평가 등의 연구가 수행될 예정이다.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.97-103
• /
• 2006

Excess sludge treatment and disposal currently represent a rising challenge for domestic or wastewater treatment plants due to economic, environmental and regulation factors. Conventional gravity sedimentation process has been widely used in sludge thickening. The operation method of the process is very simple, but the process requires long detention time for sludge thickening, uses polymers, and shows low sludge thickening efficiency. To solve the problems, we studied on DAF (Dissolved Air Flotation) system. We use bulking sludge of a paper manufacturing plant. The effects of parameters such as SVI (Sludge Volume Index), storage time, initial concentration and wet density of excess sludge were examined. The results showed that the more SVI was low, the more sludge was thickened. As storage time goes by, SVI was increased and thickening performance was deteriorated. In order to improve flotation performance at high concentration, high recycling ratio and pressure did not increase the concentration due to thickening limitation. The addition of 0.8 g/L of loess was increased flotation efficiency of 1.41 times.

• 한국환경보건학회지
• /
• 제33권1호
• /
• pp.68-74
• /
• 2007

The objective of this study is to examine the effect of the coagulation and homogenization in bulking sludge thickening of paper manufacturing plant using DAF(Dissolved Air Flotation) and gravitational sedimentation. The effects of parameters such as dosage of coagulant and homogenization time were examined. The results showed that DAF and sedimentation was affected aluminum sulfate and anion polymer coagulant differently. At the optimum dosage of aluminum sulfate, thickening efficiency of DAF and sedimentation process were increase 1.25 time and 2.02 time, respectively. At the optimum dosage of anion polymer coagulant, thickening efficiency of DAF process was increase 1.35 time, but thickening efficiency at sedimentation was 1.06 time. When anion polymer coagulant of 0.5 mg/l was added in DAF process, water content of sludge was decreased from 96.6% to 90.7% in dewatering process using Buchner funnel test device. After homogenization(20500 rpm, 10 min), Sauter mean diameter of sludge floc was decreased from 631 ${\mu}m$ to 427 ${\mu}m$, however increase of flotation efficiency by DAF was only 1.09 time.